• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1994.07a
• /
• pp.14-18
• /
• 1994

Barotropic Model을 이용하여 바람의 계절변화에 따른 대마난류의 형성을 살펴보았다. 모델 격자간격은 위도와 경도방향 모두 $0.25^{\circ}$로 하였고 바람은 Hellerman & Rosenstein (1983)의 바람을 이용하였다. 모델결과에 의하면 대마난류는 대만해협이 음의 유선함수 (Stream Function) 값을 갖는 동계 (10월-3월)에는 쿠로시오로 부터 직접 분기되어 형성되며 대만해협이 양의 유선함수값을 갖는 하계 (4월-9월)에는 대만해협을 통해 유입된 대만난류가 대마난류의 기원으로 나타난다. 이러한 대만난류 유입경로의 계절변화는 쿠로시오 수송량의 계절변화에 의한 것이 아니라 연해 (동지나해) 에서의 바람의 계절변화에 의해 야기되는 것으로 사료된다. 대한해협과 대만해협에서의 수송량과 쿠로시오의 수송량변화는 각각의 최대, 최소값만을 고려하면 쿠로시오와 대한해협에서의 수송량 변화는 약 $180^{\circ}$의 위상차를 갖으며, 대만해협에서의 수송량변화는 북풍계열의 바람이 우세한 동계를 제외하고는 쿠로시오의 수송량변화와 같은 위상을 갖는다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.233-233
• /
• 2012

위상절연체(Bi2Te3)와의 격자상수 불일치 비율이 서로 다른 Si (111)와 Ge (111) 기판을 선택하여 Bi3Te3 박막의 성장 조건을 찾고 이에 따른 특성 분석을 수행하였다. 시료 제작은 초고진공 분위기에서 MBE를 이용하였고, AFM, XRD와 XPS로 각각 구조적 변화, 결정 상태 및 화학적 상태를 분석하였다. 우선 Si 위에 형성된 Bi2Te3의 경우, 초기 박막이 형성된 후, 증착 시간이 증가함에 따라 섬(island)모양의 구조물들이 step edge 부분에 분포되는 모습을 AFM 이미지에서 확인하였다. 형성된 박막의 스텝 단차는 약 1 nm 또는 이 값의 정수 배였고, 이것은 Bi2Te3 unit cell의 quintuple layer (QL) 값과 일치하였다. 또한 측정된 XRD pattern으로 Bi2Te3가 hexagonal 구조의 c-축에 따라 결정성이 이루어졌음을 확인할 수 있었다. XPS 스펙트럼에서는 Bi 4f가 높은 에너지 방향으로 2.3 eV, Te 3d는 낮은 에너지 방향으로 약 0.7 eV 만큼 구속 에너지의 화학적 이동이 나타남을 알 수 있었다. 이러한 결과는 Si 위에 Bi2Te3 박막이 높은 결정성을 가지고 형성되었다는 것을 의미한다. 또한 Si (111) 기판보다 Bi2Te3 결정과 격자상수 불일치의 비율이 상대적으로 작은 Ge (111)을 기판으로 하여 Bi2Te3 박막을 성장시켜 두 표면에서의 박막 성장의 특성을 비교, 논의할 것이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.624-633
• /
• 2001

Influence of the grating half-period fluctuation on the normalized coupling coefficient has been studied by an effective index transfer matrix method in quarter wavelength shifted(QWS) DFB lasers. The laser facets are assumed to be perfectly antireflection coated, and the period fluctuation is modeled by two correlated Gaussian random variables. In the presence of the random fluctuation in the grating period, effective normalized coupling coefficient is reduced because the in-phase feedback strength Is weakened. We have shown that the normalized coupling coefficient determined from the side mode spacing is less than the effective coupling coefficient, and the normalized coupling coefficient determined from the mode spacing or spontaneous emission spectrum does not properly represent the feedback strength of the grating.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.149-155
• /
• 2009

To quantitatively analyze the positioning error due to the ionosphere over the Korean peninsula, we created 2-dimensional ionosphere map using 44 permanent Global Positioning System(GPS) stations operated by Ministry of Land, Transport, and Maritime Affairs. We estimated Vertical Total Electron Content(VTEC) in a fine rectangular grids of $0.1^{\circ}{\times}0.1^{\circ}$ resolution. The observables we used were phase-leveled pseudoranges which are linear combinations of pseudoranges and carrier phases. VTECs were computed for five days during January 25-29, 2003 using the data from 45 permanent stations. In comparison with the Global Ionosphere Map of the Center for Orbit Determination in Europe, RMS differences were at the level of 8 TECU(TEC Unit).

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.415-419
• /
• 1997

A novel fiber optic sensor is demonstrated using a FBG in PM(Polarization-Maintaining) fiber. Gratings have been written in a Bow-Tie type fiber using the phase mask. The operation of the sensor simply involves monitoring back-reflected Bragg wavelengths from the grating. Since PM fiber has two principal semi-axes with two indices of refraction, two Bragg wavelengths were observed. We have observed the position of Bragg wavelengths for PM FBG shifted simultaneously by either applying the longitudinal strain or temperature change. The wavelength sensitivity of 1.2pm/$\mu$$\varepsilon$ about a longitudinal strain and the wavelength sensitivity of 11.4pm/$^{\circ}C$ about a temperature have been experimentally achieved. The wavelength sensitivity of both longitudinal strain and temperature are approximately same with the reported values for the single mode FBG. On the other hand, the change of separation between Bragg wavelengths was observed by the applying transverse stress. We observed that the separation between two Bragg wavelengths is proportional to the applied transverse stress. The wavelength sensitivity of 14.6 pm/N about a transverse stress has been achieved. We have demonstrated PM FBG sensors can measure the transverse stress independently from the effects of temperature.

• Korean Journal of Optics and Photonics
• /
• v.3 no.3
• /
• pp.148-154
• /
• 1992

With nonhardening fixer, dichromated bleacher and alcohol drying, the diffraction efficiency of over 71o/c has been achie'{ed for holographic phase gratings in silver halide emulsion. The swollen emulsion of Agfa 8E75 HD film is identified by scanning electron microscope (SEM) after chemical processing. Dichromated bleacher and rapid dehydration using alcohol drying make a strong modulation so that diffraction efficiency is. increased over 20%. The principal characteristic parameters in coupled wave theory are investigated and new modified parameter values are presented by computer simulation. Controlling the emulsion thickness has an important role as a potential source for high diffraction efficiency.ciency.

• Composites Research
• /
• v.17 no.2
• /
• pp.28-33
• /
• 2004

Failure detection in a cross-ply laminated composite beam under tensile loading were performed using a fiber Bragg grating (FBG) sensor. A Passive Mach-Zehnder interferometric demodulator was proposed to enhance sensitivity and bandwidth. The proposed FBG sensor system without active device such as a phase modulator is very simple in configuration, easy to implement and enables the measurement of high-frequency vibration with low strain amplitude such as impact or failure signal. Failure signals detected by a FBG sensor had offset value corresponding to the strain shift with vibration at a maximum frequency of several hundreds of kilohertz. at the instant of transverse crack propagation in the 90 degree layer of composite beam.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.83-91
• /
• 1998

Fiber Bragg grating which has a blazed ang1e to the plane of incident wave generates a side-mode as well as main-mode. The side-mode has an identical characteristics with a long period grating that couples with a cladding mode, so rejects the special wavelength. We experimented on the side-mode characteristics with two fibers which Ge doped depressed index fiber and very high photosensitive H$_2$ loaded step index fiber according to the tilted angle. Also, using a phase mask equipped with rotation plate which has 0.02$^{\circ}$ resolution, we can control the bandwidth and the peak value of a total loss spectrum by aligned tilted grating in a fiber and using this, tried to compose the ASE band rejection filter of the Erbium doped fiber amplifier.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.525-533
• /
• 2022

We propose an effective method for suppressing both side and grating lobes by applying 2-dimensional Fourier Transform to the received channel data during the receive focusing process of an ultrasound imaging system. When the signal from the image point is focused, the channel signals have the same DC value across the channels. However, even after echoes from outside an imaging point are focused, they are manifested as having different spatial frequencies depending on their incident angles. Therefore, after the receive focusing delay time is applied, 2-D Fourier Transform is performed on the time-channel data to separate the DC component and other frequency components in the spectral domain, and the weighting value is defined using the ratio of the two values. The side lobe and grating lobe were suppressed by multiplying the ultrasound image by a weighting value. Ultrasound images with a frequency of 5 MHz were simulated in a 64-channel linear array. The grating lobe appearing in the ultrasound image was completely removed by applying the proposed method. In addition, the side lobe was reduced and the lateral resolution was greatly increased. Results of computer simulation on a human organ mimicking image show that the proposed method can aid in better lesion diagnosis by increasing the image contrast.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.942-948
• /
• 2003

In this paper, we analyze the performance of multiple trellis coded modulation applied to continuous phase frequency shift keying (MTCM/CPFSK) for the noncoherent receiver without channel state information (CSI) on the interleaved Rician fading channel. In this system, the squared cross-correlation between the received signal and a candidate signal is used as the branch metric of the Viterbi decoder. To obtain the bit error performance of this system, we analyze the approximated pairwise error probability (PEP) and the exact PEP. We also derive the equivalent normalized squared distance (ENSD) and compare it with the ENSD of the noncoherent receiver with perfect CSI. Simulation results are also provided to verify the theoretical performance analysis.