• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.189-194
• /
• 2008

The main object of this paper is that it's possible to monitoring the deformation of cable in the tensegrity structure. always monitoring system of Fiber Bragg Grating(FBG)Sensor is described. The measurement of parts on the cable is very important. We make an experiment with measuring deformation of cable in the tensegrity structure to the pressure conditions. In the result of experiment, the fiber sensors showed good response to the pressure conditions. Therefore, We could calculate the deformation of cable structure and be possible health monitoring of the tensegrity structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.338-338
• /
• 2012

사파이어 ($Al_2O_3$)는 높은 밴드갭 에너지 (~19.5 eV)를 가진 물질로서 우수한 내마모성, 강도, 전기 절연성 및 안정한 화학적 특성을 갖고 발광다이오드 기판, 보석재료 등 각종 산업 및 기술적 분야에서 널리 사용되고 있다. 특히, 플립칩 발광다이오드 구조의 경우 광추출효율을 향상시키기 위해 높은 투과도를 갖는 사파이어 기판이 요구되어 왔으며, 지금까지 건식/습식식각방법을 이용한 사파이어 표면에 마이크로 크기의 심한 거칠기 또는 요철이 형성된 나노크기의 격자구조를 형성시키는 연구가 진행되어 오고 있다. 그 중, 나노 크기의 격자구조는 공기에서 반도체 기판까지 선형적인 유효굴절률 분포를 갖기 때문에 표면에서 생기는 Fresnel 반사 손실을 줄일 수 있다. 이러한 구조를 형성하기 위해서는 식각 마스크가 필요한데, 형성 방법으로 레이저 간섭 리소그래피, 전자빔 리소그래피, 나노임프린트 리소그래피 등이 있으나, 비싼 가격과 복잡한 공정 절차 등의 단점을 지니고 있다. 따라서 본 연구에서는 식각 마스크 패턴을 위해, 보다 저렴하고 간단한 실리카 나노구 및 열적응집 금 나노 입자를 이용하였다. 양면 폴리싱 c-plane 사파이어 기판을 사용하였고, 단일 층의 주기적인 실리카 나노구를 기판 표면에 스핀코팅에 의해 도포한 후 유도결합플라즈마 식각 장비를 이용하여 식각하여 주기적인 패턴을 갖는 렌즈모양의 격자구조를 형성하였다. 그리고 주기적으로 형성된 격자 위에 열 증착기를 이용하여 금 박막을 증착한 후 급속열적어닐닝(rapid thermal annealing)을 이용하여 열처리함으로써 비주기적인 금 나노입자를 형성시켰다. 형성된 금 나노패턴을 이용하여 동일한 조건으로 식각함으로써 광대역 및 전방향성 높은 투과도를 갖는 원뿔 모양의 사파이어 나노구조를 제작하였다. 제작된 샘플의 패턴 및 식각 형상은 전자현미경을 사용하여 관찰하였으며, UV-vis-NIR 분광광도계 (spectrophotometer)를 사용하여 투과율을 측정하였다. 렌즈 모양 표면 위에 원뿔모양의 나노구조를 갖는 사파이어 기판은 일반적인 사파이어 기판보다 향상된 투과율 특성을 보였다.

• Composites Research
• /
• v.30 no.6
• /
• pp.338-342
• /
• 2017

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.431-434
• /
• 2005

A series of numerical studies are carried out for the different regimes of the detonation phenomena to investigate the computational requirements for the simulation of the cell structure of detonation wave by varying the reaction constants and grid resolutions. The computational results are investigated by comparing the solution of steady ZND structure to draw out the minimum grid resolutions and the size of the computational domain for capturing cell structures of the different regimes of the detonation phenomena.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.914-918
• /
• 1997

MBS에 의해(001)GaAs기판 위에 성장된 Zn$_{1-x}$Co$_{x}$Se(x=1.0, 7.4, 9.5 %)반도체 박막과 (ZnSe/FeSe)반도체 초격자 박막의 미세구조를 투과전자현미경을 이용하여 연구하였다. Zn$_{1-x}$Co$_{x}$Se 박막 시편의 경우, 박막과 기판 사이의 격자 불일치때문에 a/2<110>형태의 버거즈 벡터를 가지는 부정합 전위를 관찰하였다. 모든 Zn$_{1-x}$Co$_{x}$Se 박막과 기판의 계면은 뚜렷이 구별되었고, 계면에서 산화물이나 이물질이 존재하지 않았다. 또한, (ZnSe/FeSe)초격자를 성장시키기 전에 GaAs기판 위에 ZnSe바닥층을 넣음으로써 고품질의 (ZnSe/FeSe)초격자를 얻었다. (ZnSe/FeSe)초격자에 있는 FeSe는 섬아연광 결정구조로 존재하였다.

• Applied Microscopy
• /
• v.27 no.1
• /
• pp.101-109
• /
• 1997

The nonstoichiometric ordering of Mg and Nb cations in undoped and La-doped lead magnesium niobate solid solutions has been investigated by means of high-resolution transmission electron microscopy and computer image simulation. High-resolution lattice images were obtained under various microscope imaging conditions and objective apertures. Computer image simulations were performed for a wide range of sample thickness, defocusing value, and long-range order parameter. The simulated images revealed that the lattice images of the ordered regions were predominantly dependent on the long-range order parameter. From the comparisons of the experimental and simulated images for the ordered regions, the long-range order parameter approximately ranged 0.2 to 0 7. It was also found that the ordered structure has a $(NH_4)_3-FeF_6$ structure, which consists of alternating Mg- and Nb-preferred sublattices along the (111) directions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.835-837
• /
• 2017

In this paper, manufacturing processes of cylindrical composite lattice structures using filament winding method was described. Cylindrical composite lattice structures were manufactured in accordance with four major steps. Silicon mold of lattice shape was installed on mandrel and then continuous fiber was wound on silicon mold. After winding process, in order to ensure the same thickness for all regions, compression process was done for its intersection parts. Finally, the composite lattice structure was demoulded after curing in oven. It was found that the manufactured cylindrical composites lattice structure had 2.4% of dimensional error compared to the design requirements.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.177-183
• /
• 2008

The sub-salt imaging technique becomes more crucial to detect the hydro-carbonates in petroleum exploration as the target reservoirs get deeper. However, the weak reflections from the sub-salt structures prevent us from obtaining high fidelity sub-salt image. As an effort to overcome this difficulty, we applied the waveform inversion by implementing multi-grid technique to the sub-salt imaging. Through the comparison between the conventional waveform inversion using fixed grid and the multi-grid technique, we confirmed that the waveform inversion using multi-grid technique has advantages over the conventional fixed grid waveform inversion. We showed that the multi-grid technique can complement he velocity estimation result of the waveform inversion for imaging the sub-salt structures, of which velocity model cannot be obtained correctly by the conventional fixed grid waveform inversion.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.1-5
• /
• 2010

In this study, we propose a grating structure using guided-mode resonance (GMR) to increase the absorption efficiency of a silicon solar cell. The proposed solar cell design consists of a one-dimensional diffraction grating and a planar waveguide layer of poly-silicon deposited on a silver reflector. We investigate the influence of structure parameters such as grating period, waveguide thickness, grating width and grating depth. Optimal parameters are found using the particle swarm optimization (PSO) algorithm. In the optimized GMR-assisted solar cell, absorption efficiency up to 65.8% is achieved in the wavelength range of 300 nm~750 nm.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.169-175
• /
• 2020

We design a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. To maintain the high quality of the SBC beam, we propose a multilayer mirror structure in which the wavefront distortion due to stress accumulation is minimized. Moreover, to prevent light absorption from contamination, an optimized design to minimize the grating thickness was performed. The optimally designed diffraction grating has 99.36% diffraction efficiency for -1st-order polarization-independent light, for incidence at the Littrow angle and 1055-nm wavelength. It is confirmed that the designed diffraction grating has sufficient process margin to secure a polarization-independent diffraction efficiency of 96% or greater.