• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.129-134
• /
• 1995

With a view to utilizing effectively fish skin wasted from marine manufactory, an extracted dover sole skin gelatin was fractionated by further ethanol fractional precipitation method, and then the functional and physicochemical properties for the modified gelatin were determined. Ethanol was added to the concentration of 30% in an extracted dover sole skin gelatin solution, and then the mixture was left to stand at $0^{\circ}C$ for 12 hours. Finally, the precipitates were dried by hot-air$(40^{\circ}C)$ blast. The yellowfin sole skin gelatin prepared by further ethanol fractional precipitation has 223.0 g in gel strength, $17.7^{\circ}C$ in the melting point, and $12.0^{\circ}C$ in the gelling point. The physicochemical properties of the ethanol treated fish skin gelatin were superior to those of fish skin gelatin prepared without ethanol adding, whereas inferior to those of animal skin gelatin. The functional properties of the ethanol treated fish skin gelatin were superior to those of fish skin gelatin prepared without ethanol adding, and were more similar to animal skin gelatin. It may be concluded, from these results, that the dover sole skin gelatin prepared by further ethanol fractional precipitation can be effectively utilized as a human food by improving the functional properties.

• Composites Research
• /
• v.15 no.6
• /
• pp.8-15
• /
• 2002

In this work, the effect of biodegradable poly(butylene succinate)(PBS) in difunctional epoxy(21:P) resin was investigated in terms of rheological properties, cure kinetics, thermal stabilities, and mechanical interfacial properties. Rheological properties of the blend system were measured under isothermal condition using a rheometer. Cross-linking activation energies($\textrm{E}_c$) were determined from the Arrhenius equation based on gel time and curing temperature. The $\textrm{E}_c$ was increased in the presence of 10 wt% PBS as compared with neat 2EP. From the DSC results of the blends, the cure activation energies($\textrm{E}_a$) showed a similar behavior with $\textrm{E}_c$ due to the increased intermolecular interaction between 2EP and PBS. The decomposed activation energies($\textrm{E}_t$) for the thermal stability derived from the integral method of Horowitz-Metzger equation, were also increased in 10 wt% PBS. In addition, 20 wt% PBS showed the highest critical stress intensity factor($\textrm{E}_{IC}$). which was explained by increasing the fracture toughness of the 2EP/PBS blend systems.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.205-210
• /
• 2013

For the synthesis of crystalline LAS glass by sol-gel method, the effect of operation conditions including metal alkoxide ratio, nucleating agent composition and heat treatment on the crystalline properties was experimentally investigated. The gelation time and crystallization temperature were proportionally affected by the mole ratio of TEOS in metal alkoxides solution. The addition of $TiO_2$ had an influence on the increasing of the gelation time, but the crystallization temperature was rarely dependent on the adding of nucleating agent. The crystallinity of LAS glass was improved by the nucleating agent under same heat treatment conditions.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.25-25
• /
• 1993

기존의 분리및 정제 공정을 대체할 수 있는 공정으로서 막분리법이 대두되고 있으며, 이가운데 역삼투분리 공정은 이온규모의 작은 물질의 분리, 농축 방법으로 주목받고 있다. 이러한 막분리에서는 적절한 막의 개발이 중요한 인자이며, 요즈음에는 복합막형태의 비대칭막이 많이 사용되고 있다. 본연구에서는 기존의 복합막에서 지지막으로 주로 사용되는 PSf보다 친수성, 내온성, 내화학성 및 물리적특성이 뛰어난 PES막을 직접 제조하고 이를 이용하여 계면중합법에 의하여 FT-30 type의 복합막을 제조하였다. 지지막은 PES의 조성을 변화시켰으며 기공형성제로첨가된 PVP의 양을 변화시켰으며 각각 1분과 2시간동안 증발 및 겔화를 행하였다. 복합막의 제조에서는 수용상으로는 MPD를, 유기상으로는 TMC를 사용하였다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.92-97
• /
• 1998

열잠재성 경화제인 N-benzylpyrazinium hexafluoroantimonate (BPH)를 이용하여 함 량에 따른 DGEBA계 에폭시 수지의 경화반응에서의 유변학적 특서 및 반응속도를 연구하 였다. 경화시의 활성화 에너지를 Barrett 방법을 이용한 동적 DSC 측정방법으로 조사 하였 다. DSC 실험 결과 BPH의 함량이 증가할수록 활성화 에너지는 감소함을 알수 있었다. Rheomter를 이용하여 DGEBA/BPH 계의 유변학적 특성을 등온경화와 tdmdhsrud화 조건하 에서 살펴보았다. BPH의 함량이 증가함에 따라 겔화점 도달시간 빠르게 나타나는데 이는 낮아진 활성화 에너지에 기인한 것으로 사료된다. 두 번째 damping 피크를 이용하여 유리 화점을 측정하여 Time-Temperature-Transformation (T-T-T) cure diagram을 작성한 결 과 열잠재성 경화제의 특성인 일정온도 이상에서 활성이 나타남을 확인할수있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.231-234
• /
• 2003

CS와 실란의 반응시 생성된 실란올들이 동종간의 반응에 비하여 실리카 표면과의 반응이 진행되는 효과에 따라서, 그리고 실란들의 종류에 따라 경화밀도와 재료특성이 상당히 달라지게 된다. 본 논문에서는 CS/MTMS 졸반응에서 CS의 종류, CS/MTMS의 함량비, 졸의 반응시간 등을 인자로 하여 졸들을 합성하고 겔화된 도막의 물성들을 조사하였다. 그 결과 MTMS의 함량과 비례하여 친수성은 증가하고 표면조도는 나아지는 것을 알 수 있었고 반응시간에 비례하여 친수성은 감소하고 표면조도는 안 좋아지는 것을 알 수 있었다. 그리고 내열성은 MTMS의 함량이 적을수록 좋은 결과를 나타내었다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.960-966
• /
• 1997

The effects of epoxy resins and content of catalyst on the cure characteristics were studied by FT-IR, DSC and dynamic viscometer for the thermal properties and rheological properties of the catalytic (N-Benzylpyrazinium hexafluoroantimonate, BPH) epoxy thermosetting system. Compared with DSC results of DEGBF containing 0.5wt% BPH, the DSC thermograms of DGEBA containing 0.5wt% BPH indicated that the reaction was faster than that of DGEBF/BPH and the conversion rate of DGEBA/BPH was high in the initial stage of the reaction. As the concentration of BPH increases, the reaction and conversion rates show similar value in both the cases. The influence of hydroxyl group of epoxy resin on gel point defined from the crossover point of storage modulus (G') and loss modulus (G") could be explained by the formation of 3-dimensional network in the initial stage owing to the curing reaction between epoxides and hydroxyl groups of epoxy resin. This was consistent with the gel point obtained from DSC, FT-IR and moduli crossover. The activation energy (Et) obtained from the crossover point (G'/G"=1) are $31-39kJ.mol^{-1}$ for various BPH compositions in case of two epoxy systems.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.213-226
• /
• 2003

The cure and rheological behavior of diglycidyl ether of bisphenol F/nadic methyl anhydride resin system with the kinds of imidazole were studied using a differential scanning calorimeter (DSC) and a rotational rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/ anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at $20{\sim}40 %$ of the reaction. The rate constants ($k_1,\;k_2$) showed temperature dependance, but reaction order did not. The reaction order (m+n) was calculated to be close to 3. There are two reaction mechanisms with the kinds oi catalyst. The gel time was determined by using G'-G" crossover method, and the activation energy was obtained from this results. From measurement of rheological properties it was found that the logarithmic 1:elation time of fused silica filled DBEBF epoxy compounds linearly increased with the content of filler and decreased with temperature. The highly filled epoxy compounds showed typical pseudoplastic behavior, and the viscosity of those decreased with increasing maximum packing ratio.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.17-23
• /
• 1994

Through sol-gel process, inorganic/organic composite as a dye host was made. It was observed that this composite has about 90% of trnasmittance by UV/VIS spectrophotometer. The transmittance is the most important requirement to decide whether the composite could apply or not as the dye host. The transmittance was increased with decreasing HCl as a catalyst, aging time, and amount of PDMS. Also, fluorescent and transmittant charateristics of Rhodamine 6G Perchlorate that was doped into ORMOSIL were measured. The fluorescent intensity was increased and the trnasmittance was decreased with rising gelling temperature.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.209-221
• /
• 2012

The purpose of this study is to apply molecular gastronomy and its spherification methodology to persimmon desserts. We prepared persimmon calcium alginate beads and investigated physical and sensory characteristics of beads according to the different concentration of calcium chloride(0.5, 0.75, 1.0%) and reaction time(2, 4, 6, 8, 10 min). Lightness and yellowness were decreased significantly as both calcium chloride concentration and reaction time increased. However, redness was increased significantly as the concentration of calcium chloride and reaction time increased. Hardness, springiness, chewiness, cohesiveness, and resilience except for adhesiveness tended to increase as the concentration of calcium chloride and reaction time increased. The thickness of beads also increased as the concentration of calcium chloride and reaction time increased. Quantitative descriptive analysis showed that voluminosity, springiness, hardness, chewiness, and residue tended to increase as the concentration of calcium chloride increased. Overall acceptability reached a peak at the persimmon bead containing 0.5% calcium chloride. The result of this study showed that the concentration of calcium chloride and reaction time influenced the overall characteristics of calcium alginate beads.