• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.323-330
• /
• 2017

For the formation identification, surface geological survey, drill core analysis, core description and well log analysis are widely used. Among them well log analysis is a popular method with drill core analysis, since it measures continuously physical properties at in-situ. In this study we calculated Thomsen anisotropic parameters (${\varepsilon},\;{\delta},\;{\eta}$) after applying Backus averaging method to the P wave velocity, S wave velocity, and density logs. The well log data application of Blackfoot, Canada, shows the formation could be divided by 12 layers. This shows that Thomsen anisotropic parameters for identifying formation using anisotropic parameters is useful if there is no natural gamma log that is widely used for the formation identification.

• The Journal of Engineering Geology
• /
• v.25 no.2
• /
• pp.281-290
• /
• 2015

Log density data were collected and compared with the core density data throughout the southern Korean Peninsula. The comparison reveals that the log densities obtained from gamma-gamma log are much lower than the core densities obtained from laboratory density measurement of core samples. The anomalously low log densities can be attributed to the small-source density log data. Correlation analysis reveals differences between densities derived from the two methods, indicating that a data quality problem arises when using small-source log data. The problem is probably due to the fact that small-source data have not been obtained under ideal conditions for maintaining the appropriate relationship between gamma response and formation density. The frequency distribution characteristics of formation density in the southern Korean Peninsula could be determined using the core and the standard-source log data which are well-correlated.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.231-240
• /
• 2006

A variety of geophysical well loggings have been conducted to investigate the geological characteristics for basaltic volcanic area in Jeju Island. Specially, there is no precedent case study using geophysical well loggings in Jeju Island. And so, the proper understandings for geological features of Jeju Island are the key to interpret geophysical well logs. Presently, seawater intrusion monitoring systems have been constructed for systematic development and conservation of groundwater resources. As the results of geophysical well loggings in this seawater intrusion monitoring boreholes, the responses of well logs for saturated zone have distinctly identified basalt sequences. In particular, neutron logging, gamma-gamma (density) logging, and resistivity logging have well exhibited the characteristics of lava flows and lithologic boundaries. In hyalocastite, porosity is high, and resistivity is low. Eventually, geophysical well logs are useful for securing sustainable development of groundwater in Jeju Island in that it has identified the characteristics of geological responses.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.235-244
• /
• 2012

Nuclear magnetic resonance (NMR) logging has been considered one of the most complicated nevertheless, one of the most powerful logging methods for the characterization on of both rocks and natural fluids in formation. NMR measures magnetized signals (polarization and relaxation) between the properties of hydrogen nucleus called magnetic moment and applied magnetic fields. The measured data set contains two important petrophysical properties such as density of hydrogen in the fluids inside the pore space and the distinct decay rate for fluid type. Therefore, after the proper data processing, key petrophysical information, not only the quantities and properties of fluids but also supplies of rock characterization in a porous medium, could be archived. Thus, based on this information, several ongoing researches are being developed in estimating aspects of reservoir productivity information, permeability and wettability since it is the key to having correct interpretation. This study goes through the basic theory of NMR at first, and then reviews NMR logging tools as well as their technical characteristics. This paper also briefly discusses the basic knowledge of NMR simulation algorithm by using Random walk.

• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.170-175
• /
• 1998

A systematic methodology is developed for the prediction of the lithology using electrofacies classification from wireline log data. Multivariate statistical techniques are adopted to segment well log measurements and group the segments into electrofacies types. To consider corresponding contribution of each log and reduce the computational dimension, multivariate logs are transformed into a single variable through principal components analysis. Resultant principal components logs are segmented using the statistical zonation method to enhance the quality and efficiency of the interpreted results. Hierarchical cluster analysis is then used to group the segments into electrofacies. Optimal number of groups is determined on the basis of the ratio of within-group variance to total variance and core data. This technique is applied to the wells in the Korea Continental Shelf. The results of field application demonstrate that the prediction of lithology based on the electrofacies classification works well with reliability to the core and cutting data. This methodology for electrofacies determination can be used to define reservoir characterization which is helpful to the reservoir management.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.39-47
• /
• 2003

The purpose of this paper is to present the method of acquiring 3D GIS data using the statistical estimating methods of Well Log for balancing Seismic data. We use the reflection coefficients of seismic data to get the parameters for the reservoir characterization and we balance the reflection coefficients of seismic data using well log to increase the confidence of the estimated result. Well logs are required to balance the reflection coefficients at the point where seismic data are acquired. In this research, we discuss the geostatistical estimation methods and we applied these methods to real data. Kriging gives high weights to the close well logs, which means estimated results are mainly affected by close well log. High value of cross variograms gave big difference on cokriging result comparing to kriging results and low value of cross variogram gave little differences.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.263-270
• /
• 2008

The Gas Hydrate Research and Development Organization (KGHDO) of Korea accomplished successfully geophysical logging (LWD: Logging While Drilling, MWD: Measurement While Drilling) for five sites in 2007, in order to investigate the presence of gas hydrate in the Ulleung Basin, the East Sea of Korea. The togging parameters acquired from LWD/MWD dre electrical resistivity, acoustic velocity, neutron density and porosity, and natural gamma. In addition, pressure, temperature, and diameter of borehole were measured. LWD/MWD data showed several evidences indicating the presence of gas hydrate. Based on LWD/MWD data, three coring sites were selected for sampling of gas hydrate. Subsequently, various gas hydrate samples were collected directly from three sites. Therefore. the presence of gas hydrates was verified by coring. LWD/MWD data will be significantly used to estimate the amount of gas hydrate. Also, they will provide important information to elucidate about sedimentologic characteristics of gas-hydrate bearing formation and sedimentary environment of the Ulleung Basin.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.259-267
• /
• 2010

Resistivity logging instruments were designed to measure electrical resistivity of formation, which can be directly interpreted to provide water-saturation profile. Short and long normal logging measurements are made under groundwater level. In some investigation sites, groundwater level reaches to a depth of a few meters. It has come to attention that the proximity of groundwater level might distort short and long normal logging readings, when the measurements are made near groundwater level, owing to the proximity of an insulating air. This study investigates the effects of the proximity of groundwater level (and also the proximity of earth surface) on the normal by simulating normal logging measurements near groundwater level. In the simulation, we consider all the details of real logging situation, i.e., the presence of wellbore, the tool mandrel with current and potential electrodes, and currentreturn and reference-potential electrodes. We also model the air to include the earth’'s surface in the simulation rather than the customary choice of imposing a boundary condition. To obtain apparent resistivity, we compute the voltage, i.e., potential difference between monitoring and reference electrodes. For the simulation, we use a twodimensional, goal-oriented and high-order self-adaptive hp finite element refinement strategy (h denotes the element size and p the polynomial order of approximation within each element) to obtain accurate simulation results. Numerical results indicate that distortion on the normal logging is greater when the reference potential electrode is closer to the borehole and distortions on long normal logging are larger than those on short normal logging.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.225-233
• /
• 2004

The purpose of this study is to provide the geo-technical information by assessment of the in-situ rock strength using the reflected wave energy and travel time data acquired by the borehole acoustic scanner. In order to compare and analyze the relationship between the uniaxial compressive strength and the reflected wave energy, the laboratory test and the borehole acoustic scanning were conducted for the set of specimens, such as mortar, concrete, and rock samples which have different rock type. Finally, we verified the applicability of the reflected wave energy acquired by the borehole acoustic scanner to quantitatively estimate the in-situ rock strength.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.55-71
• /
• 2005

Jeju Island is mainly composed of basaltic lava flows and subordinate amounts of volcaniclastic sedimentary rocks. Jeju Province operates the monitoring wells for seawater intrusion problems around Jeju Island to evaluate of groundwater resources in coastal area. Various surveys and monitoring have been performed in boreholes, and also conventional geophysical well loggings conducted to identify basalt sequences and assess seawater intrusion problems. Various conventional geophysical well logs, including radioactive logs, electrical log, caliper log, and temperature and conductivity log and heat-pulse flowmeter log were obtained in 29 boreholes. The results of geophysical well loggings for saturated rocks are interesting and consistent. Natural gamma logs are useful in basalt sequences to sedimentary interbeds, unconsolidated U formation, and seoguipo formation with higher natural gamma log regardless of saturated or unsaturated basalts. Neutron logs are very effective to discriminate among individual lava flows, flow breaks, and sedimentary interbeds in saturated formation. In hyalocastite, porosity is high and resistivity is low, and we think that hyalocastite is a major pathway of fluid flow. In trachybasalt, porosity has a wide range and resistivity is high. In sedimentary interbeds, unconsolidated U formation and seoguipo formation, porosity is high and resistivity is low. The temperature logs in eastern area in Jeju are useful to interpret the hydrogeological unit and evaluate seawater intrusion in Suan area.