• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.273-278
• /
• 2007

검사점 및 복구 도구(Checkpointing & Recovery Facility)를 이용하여 임베디드 시스템에서 결함 허용(Fault Tolerance) 기법을 적용할 경우 쓰기 작업의 오버헤드로 인해 실용성이 크게 떨어지게 된다. 실시간 운영체제와 함께 어떠한 한계 상황에서 결함 허용 및 복구 도구가 오히려 시스템의 성능을 저하시키는 요인으로 작용하게 되면 이는 결국 쓸모없는 도구가 되어 사용되지 않을 것이다. 따라서 프로세스의 복구를 위해 저장하는 프로세스 이미지의 기록에 소요되는 시간을 크게 낮추어야만 비로소 검사점 도구가 그 진가를 발휘하게 될 수 있다. 본 논문에서는 NVSRAM(Non Volatile SRAM)을 검사점 및 복구 도구의 저장 장치로 활용함으로써 기존의 검사점 도구에서 성능을 저하시키는 주원인이었던 검사점 기록의 오버헤드를 개선하기 위한 연구를 수행하였다. 검사점 기록 시간을 줄이기 위한 방법으로 주 메모리에 저장된 프로세스의 복구와 관련된 데이터를 SRAM 특성을 갖는 비휘발성 저장 장치인 NVSRAM에 저장하여 디스크 접근에 소요되는 시간을 최소화시킴으로써 임베디드 시스템에서 실용적으로 사용 가능한 검사점 도구를 구현하였고, 이러한 연구의 결과를 검증하기 위해 기존 시스템에서 저장 장치로 사용되던 플래시 메모리, 주 메모리, 원격 메모리를 사용하는 경우의 성능과 NVSRAM을 활용할 때의 성능을 비교해 보았다. 본 연구에서 제안하는 결함 허용 도구는 실제 시스템에 적용하여 효과적인 성능을 발휘할 수 있을 것이며, 차세대 메모리를 이용한 결함 허용 도구의 연구에 기여를 할 수 있을 것으로 기대된다.ate첨가배지(添加培地)에서 가장 저조(低調)하였다. vitamin중(中)에서는 niacin과 thiamine첨가배지(添加培地)에서 근소(僅少)한 증가(增加)를 나타내었다.소시켜 항이뇨 및 Na 배설 감소를 초래하는 작용과, 둘째는 신경 경로를 통하지 않고, 아마도 humoral factor를 통하여 신세뇨관에서 Na 재흡수를 억제하는 작용이 복합적으로 나타내는 것을 알 수 있었다.으로 초래되는 복합적인 기전으로 추정되었다., 소형과와 기형과는 S-3에서 많이 나왔다. 이상 연구결과에서 입도분포가 1.2-5mm인 것이 바람직한 것으로 나타났다.omopolysaccharides로 확인되었다. EPS 생성량이 가장 좋은 Leu. kimchii GJ2의 평균 분자량은 360,606 Da이었으며, 나머지 두 균주에 대해서는 생성 EPS 형태와 점도의 차이로 미루어 보아 생성 EPS의 분자구조와 분자량이 서로 다른 것으로 판단하였다.TEX>개로 통계학적으로 유의한 차이가 없었다. Heat shock protein-70 (HSP70)과 neuronal nitric oxide synthase (nNOS)에 대한 면역조직화학검사에서 실험군 Cs2군의 신경세포가 대조군 12군에 비해 HSP70과 nNOS의 과발현을 보였으며, 이는 통계학적으로 유의한 차이를 보였다(p<0.05). nNOS와 HSP70의 발현은 강한 연관성을 보였고(상관계수 0.91, p=0.000), nNOS를 발현하는 세포가 동시에 HSP70도 발현함을 확인할 수 있었다. 결론: 우리는 cyclosporin A가 토끼의 25분간의 척수허혈에 대해 척수보호 효과가 있었으며 이는 HSP70의

• Journal of Service Research and Studies
• /
• v.10 no.2
• /
• pp.17-29
• /
• 2020

This study was performed to derive a modern service management model reflecting the philosophy of the new business administration. Service management as the modern business administration should be faithful to the spirit of modernity. In addition, service management must be faithful to the essence of service in service economy era. And since modern management is to manage organizations those are the central organizations of human society, it must be managed according to the common principles of the world. Management that satisfies these three management philosophy conditions is defined as modern service management. In this study, we analyzed that the existing service management framework does not meet these standards of modern management and derived an improved modern service management model. The modern service management model must be a management model that reflects the essence of intangible goods called service, it must be a management framework that reflects the modern spirit, and it must be a management model that reflects the common principles of the world required by the central organization of the modern economic society. Therefore, this study analyzed the modern spirit in addition to the service essence and the common principle of the world analyzed in the previous study, and presented a modern service management model with these three requirements. Also, examples of modern service management were presented. This study is a conceptual model, and analytical research is needed to demonstrate that this management model can consistently produce excellent management performance by strengthening empirical studies in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.190-196
• /
• 2020

FRACAS(Failure Reporting, Analysis and Corrective Action System) has been applied in various industries to improve the reliability of the systems. FRACAS is effective in improving reliability by repeating failure analysis, proper corrective action, and result verification for identified failures. However, FRACAS has many limitations in terms of process, data collection and management to be integrated into the existing development environment. In the domestic defense industry, studies on the development of FRACAS system and process improvement have been conducted to solve the difficulties of applying FRACAS, but most of them are concentrated in the operation/maintenance phase. Since FRACAS should be conducted in consideration of TLCSM(Total Life Cycle System Management), it is necessary to study the reference architecture so that FRACAS can be applied from the early design phase. In this paper, we studied the TLCSM-based integrated architecture considering the system life cycle phases, FRACAS closed-loop process, and FRACAS essentials in order to effectively apply FRACAS throughout the life cycle of defense systems. The proposed architecture was used as a reference model for FRACAS in a shipboard combat system.

• The Journal of Society for e-Business Studies
• /
• v.26 no.3
• /
• pp.1-20
• /
• 2021

As the Great Reset is discussed at the World Economic Forum due to the COVID-19 pandemic, artificial intelligence, the driving force of the 4th industrial revolution, is also in the spotlight. However, corporate research in the field of artificial intelligence is still scarce. Since 2000, related research has focused on how to create value by applying artificial intelligence to existing companies, and research on how startups seize opportunities and enter among existing businesses to create new value can hardly be found. Therefore, this study analyzed the cases of startups using the comprehensive framework of the multi-level perspective with the research question of how artificial intelligence based startups, a sub-industry of software, have different innovation patterns from the existing software industry. The target firms are gazelle firms that have been certified as venture firms in South Korea, as start-ups within 7 years of age, specializing in machine learning modeling purposively sampled in the medical, finance, marketing/advertising, e-commerce, and manufacturing fields. As a result of the analysis, existing software companies have achieved process innovation from an enterprise-wide integration perspective, in contrast machine learning technology based startups identified unit processes that were difficult to automate or create value by dismantling existing processes, and automate and optimize those processes based on data. The contribution of this study is to analyse the birth of artificial intelligence-based startups and their innovation patterns while validating the framework of an integrated multi-level perspective. In addition, since innovation is driven based on data, the ability to respond to data-related regulations is emphasized even for start-ups, and the government needs to eliminate the uncertainty in related systems to create a predictable and flexible business environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.87-96
• /
• 2019

In this paper, we propose a MapReduce-supported clustering technique for collecting and classifying distributed workflow enactment event logs as a preprocessing tool. Especially, we would call the distributed workflow enactment event logs as Workflow BIG-Logs, because they are satisfied with as well as well-fitted to the 5V properties of BIG-Data like Volume, Velocity, Variety, Veracity and Value. The clustering technique we develop in this paper is intentionally devised for the preprocessing phase of a specific workflow process mining and analysis algorithm based upon the workflow BIG-Logs. In other words, It uses the Map-Reduce framework as a Workflow BIG-Logs processing platform, it supports the IEEE XES standard data format, and it is eventually dedicated for the preprocessing phase of the ${\rho}$-Algorithm that is a typical workflow process mining algorithm based on the structured information control nets. More precisely, The Workflow BIG-Logs can be classified into two types: of activity-based clustering patterns and performer-based clustering patterns, and we try to implement an activity-based clustering pattern algorithm based upon the Map-Reduce framework. Finally, we try to verify the proposed clustering technique by carrying out an experimental study on the workflow enactment event log dataset released by the BPI Challenges.

• Journal of Korea Water Resources Association
• /
• v.54 no.9
• /
• pp.681-692
• /
• 2021

Vegetation processes have a significant impact on rainfall runoff processes through evapotranspiration control, but are rarely considered in the conceptual lumped hydrological model. This study evaluated the model performance of the Hapcheon Dam watershed by integrating the ecological module expressing the leaf area index data sensed remotely from the satellite into the hydrological partition module. The proposed eco-hydrological model has three main features to better represent the eco-hydrological process in humid regions. 1) The growth rate of vegetation is constrained by water shortage stress in the watershed. 2) The maximum growth of vegetation is limited by the energy of the watershed climate. 3) The interaction of vegetation and aquifers is reflected. The proposed model simultaneously simulates hydrologic components and vegetation dynamics of watershed scale. The following findings were found from the validation results using the model parameters estimated by the SCEM algorithm. 1) Estimating the parameters of the eco-hydrological model using the leaf area index and streamflow data can predict the streamflow with similar accuracy and robustness to the hydrological model without the ecological module. 2) Using the remotely sensed leaf area index without filtering as input data is not helpful in estimating streamflow. 3) The integrated eco-hydrological model can provide an excellent estimate of the seasonal variability of the leaf area index.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.123-131
• /
• 2021

The buffer is a key component of an engineered barrier system that safeguards the disposal of high-level radioactive waste. Buffers are located between disposal canisters and host rock, and they can restrain the release of radionuclides and protect canisters from the inflow of ground water. Since considerable heat is released from a disposal canister to the surrounding buffer, the thermal conductivity of the buffer is a very important parameter in the entire disposal safety. For this reason, a lot of research has been conducted on thermal conductivity prediction models that consider various factors. In this study, the thermal conductivity of a buffer is estimated using the machine learning methods of: linear regression, decision tree, support vector machine (SVM), ensemble, Gaussian process regression (GPR), neural network, deep belief network, and genetic programming. In the results, the machine learning methods such as ensemble, genetic programming, SVM with cubic parameter, and GPR showed better performance compared with the regression model, with the ensemble with XGBoost and Gaussian process regression models showing best performance.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.72-80
• /
• 2021

Based on the previous year's statistics, 37% of buildings in South Korea are aged over 30 years. As the number of the aging buildings increases, so does the need for maintenance. Building maintenance involves a significant number of works; the work of 'maintenance manager' accounting for the largest part. Currently, the maintenance history record is mostly in drawing or handwritten form which makes reviewing the data highly time consuming. Therefore, to improve the convenience of maintenance works and optimize historical data management, the existing maintenance process was analyzed. Problems were derived and a smart device-based automation model was established. In order to establish a smart device-based automation model, ① general flow of facility management process was analyzed and related articles were reviewed, ② current maintenance process was optimized, ③ functional block diagram of BIM Data, COBie Data, IoT, and AR-based automated maintenance management model was created, ④ a smart device-based automated maintenance management model was constructed, ⑤ finally, the above system was verified by testing the aforementioned model in the field site, evaluating the time required for the maintenance process and reviewing maintenance history data against the current one.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.2
• /
• pp.95-108
• /
• 2021

Technology innovation activities are very important for companies to secure technological competitiveness and continue to grow. Korea operates a certification system at the national level to promote corporate innovation activities, and strives to enhance SMEs' global technological competitiveness. Among these, the representative system related to technological innovation is the New Excellent Technology (NET) certification. NET is certified through a strict three-stage screening process, and is operated for the purpose of commercialization of new technology, technology trading, and promotion of early market entry by companies. Acquiring NET certification means that the company has a certain level of technological competitiveness. Therefore, this study attempted to conduct an empirical analysis on which technology innovation activities of companies affect the success of R&D projects and improvement of management performance, centering on NET certification system. To verify this, technology strategy, technology planning, systematic R&D process, internal cooperation, and external cooperation activities were set as major variables. As a result of the empirical analysis, it was confirmed that all variables set in this study individually contributed to the success of the R&D project and improvement of management performance. However, when looking at a comprehensive level that considers all variables, it was analyzed that systematic R&D process management and cooperation activities with external organizations have a statistically significant effect on R&D project success, and technology strategy establishment and technology planning activities, which are the initial stages of R&D, have a statistically significant effect on management performance. This study was conducted on innovation-oriented SMEs that have established and operated corporate R&D centers and are actively conducting R&D activities, and multiple regression analysis was used as an analysis method.