• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.13-34
• /
• 2022

Soil moisture data have been collected at 11 agrometeorological stations operated by The Korea Meteorological Administration (KMA). This study aimed to verify the accuracy of soil moisture data of KMA and develop a correction formula to be applied to improve their quality. The soil of the observation field was sampled to analyze its physical properties that affect soil water content. Soil texture was classified to be sandy loam and loamy sand at most sites. The bulk density of the soil samples was about 1.5 g/cm³ on average. The content of silt and clay was also closely related to bulk density and water holding capacity. The EnviroSCAN model, which was used as a reference sensor, was calibrated using the self-manufactured "reference soil moisture observation system". Comparison between the calibrated reference sensor and the field sensor of KMA was conducted at least three times at each of the 11 sites. Overall, the trend of fluctuations over time in the measured values of the two sensors appeared similar. Still, there were sites where the latter had relatively lower soil moisture values than the former. A linear correction formula was derived for each site and depth using the range and average of the observed data for the given period. This correction formula resulted in an improvement in agreement between sensor values at the Suwon site. In addition, the detailed approach was developed to estimate the correction value for the period in which a correction formula was not calculated. In summary, the correction of soil moisture data at a regular time interval, e.g., twice a year, would be recommended for all observation sites to improve the quality of soil moisture observation data.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.18-30
• /
• 2022

Background: It was to develop an air purification system (APS) using an underground air purification layer to verify the effect of basalt forest's underground air (sumgol) on a volcanic Jeju. Finally, it is necessary to analyze these purified air components and their usefulness to the human body in an air experience center. Purpose: It was to collect basalt forest air, analyze its composition, and explore its effect on the human body. Methods: We APS devices installed at four points in the Papaville area of Jeju. The air discharged from the APS was collected and analyzed the recycling components. An installed experience room filled with negative ions is about 5,000 ions/m³. After allowing the participants to stay for 60 to 120 minutes, we investigated the state of blood vessels. Results: In the analysis of the underground air, the O₂ concentration was 21.18%, which was higher than the average oxygen concentration of 20.94% in the atmosphere. However, Formaldehyde was not detected, and the CO₂ was 419 ppm, which was lower than that of indoor air. The PM2.5 concentration was less than 24 ㎍/m³ and detected anions over 5.000 /m³. The experiencer's vascular states improved, and the increase in pulse rate and stress relief were high. Conclusions: The valuable ingredients identified by analyzing the air were precious for natural healing. The experience results showed that it effectively improved the pulse rate, blood vessels, and stress. These conditions may be highly beneficial as a new area for expanding the basalt lava forest in the Jeju area into the natural healing and wellness industry.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.105-117
• /
• 2022

This study analyzes the effects between stock returns and interest rate spread, difference between long-term and short-term interest rate through the polynomial linear regression analysis. The existing research concentrated on the business forecast through the interest rate spread focusing on the US market. The previous studies verified the interest rate spread based on the leading indicators of business forecast by moderating the period of long-term/short-term interest rates and analyzing the degree of leading. After the 7th reform of composite indices of business indicators in Korea of 2006, the interest rate spread was included in the items of composing the business leading indicators, which is utilized till today. Nevertheless, there are a few research on stock returns of each industry and interest rate spread in domestic stock market. Therefore, this study analyzed the stock returns of each industry and interest rate spread targeting Korean stock market. This study selected the long-term/short-term interest rates with high causality through the regression analysis, and then understood the correlations with each leading period and industry. To overcome the limitation of the simple linear regression analysis, polynomial linear regression analysis is used, which raised explanatory power. As a result, the high causality was verified when using differences between returns of corporate bond(AA-) without guarantee for three years by leading six months and call rate returns as interest rate spread. In addition, analyzing the stock returns of each industry, the relation between the relevant interest rate spread and returns of the automobile industry was the closest. This study is significant in the aspect of verifying the causality of interest rate spread, business forecast, and stock returns in Korea. Even though it could be limited to forecast the stock price by using only the interest rate spread, it would be working as a strong factor when it is properly utilized with other various factors.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.259-278
• /
• 2022

With the spread of Artificial Intelligence (AI), various AI-based services are expanding in the financial sector such as service recommendation, automated customer response, fraud detection system(FDS), credit scoring services, etc. At the same time, problems related to reliability and unexpected social controversy are also occurring due to the nature of data-based machine learning. The need Based on this background, this study aimed to contribute to improving trust in AI-based financial services by proposing a checklist to secure fairness in AI-based credit scoring services which directly affects consumers' financial life. Among the key elements of trustworthy AI like transparency, safety, accountability, and fairness, fairness was selected as the subject of the study so that everyone could enjoy the benefits of automated algorithms from the perspective of inclusive finance without social discrimination. We divided the entire fairness related operation process into three areas like data, algorithms, and user areas through literature research. For each area, we constructed four detailed considerations for evaluation resulting in 12 checklists. The relative importance and priority of the categories were evaluated through the analytic hierarchy process (AHP). We use three different groups: financial field workers, artificial intelligence field workers, and general users which represent entire financial stakeholders. According to the importance of each stakeholder, three groups were classified and analyzed, and from a practical perspective, specific checks such as feasibility verification for using learning data and non-financial information and monitoring new inflow data were identified. Moreover, financial consumers in general were found to be highly considerate of the accuracy of result analysis and bias checks. We expect this result could contribute to the design and operation of fair AI-based financial services.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.174-182
• /
• 2020

The permissible limit of ammonia concentration in drinking water recommended by the World Health Organization (WHO) is 1.5 mg/L. However, in the case of groundwater in Kathmandu, Nepal, the concentration of ammonia fluctuates dramatically from 0 to 120 mg/L at different locations and groundwater depths (Chapagain et al., 2010). Such a high concentration of ammonia causes aesthetic problems in drinking water, such as bad taste and odor; hence, prior treatment is required. In Kathmandu, half of the population utilizes groundwater, which is also employed for drinking water, but owing to a lack of knowledge of household water filters, residents of Kathmandu tend to depend greatly on commercially available jar water than on the installation of a proper household filtration method. Thus, in our study, we employed adsorption and reverse osmosis (RO) as two of the most viable decentralized/household treatment options to address the issue of high contamination of ammonia in drinking water. We evaluated their performances from technical and the economic perspectives using synthetically prepared groundwater at varying ammonia concentrations (50 mg/L and 15 mg/L). Consequently, it was found that adsorption via ion exchange (IE) resin was a comparatively better ammonia removal technology than RO, with 100% ammonia removal even after regeneration; the removal by RO was limited to up to 90%. Furthermore, our study suggests that IE is the most suitable ammonia removal technology for places with lower water consumption (< 50 L/day), whereas RO seemed to be a cost-effective technology for places with higher water consumption, where the daily water demand exceeds 50 L/day. Lastly, these assessments suggest that installing a suitable household treatment system would be more efficient and sustainable from both technical and economic points of view than purchasing commercially bottled water.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.334-346
• /
• 2022

There is a lack of knowledge and information on the understanding and application of the Process Safety Management (PSM) system, recognized as a major cause of industrial accidents in small-and medium-sized workplaces. Hence, it is necessary to prepare a protocol to secure the practical and continuous levels of implementation for PSM and eliminate human errors through tracking management. However, insufficient research has been conducted on this. Therefore, this study investigated and analyzed the various violations in the administrative measures, based on the regulations announced by the Ministry of Employment and Labor, in approximately 200 small-and medium-sized PSM workplaces with fewer than 300 employees across in korea. This study intended to contribute to the prevention of major industrial accidents by developing a facility maintenance web program that removed human errors in small-and medium-sized workplaces. The major results are summarized as follows. First, It accessed the web via a QR code on a smart device to check the equipment's specification search function, cause of failure, and photos for the convenience of accessing the program, which made it possible to make requests for the it inspection and maintenance in real time. Second, it linked the identification of the targets to be changed, risk assessment, worker training, and pre-operation inspection with the program, which allowed the administrator to track all the procedures from start to finish. Third, it made it possible to predict the life of the equipment and verify its reliability based on the data accumulated through the registration of the pictures for improvements, repairs, time required, cost, etc. after the work was completed. It is suggested that these research results will be helpful in the practical and systematic operation of small-and medium-sized PSM workplaces. In addition, it can be utilized in a useful manner for the development and dissemination of a facility maintenance web program when establishing future smart factories in small-and medium-sized PSM workplaces under the direction of the government.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.127-146
• /
• 2022

Recently, as word embedding has shown excellent performance in various tasks of deep learning-based natural language processing, researches on the advancement and application of word, sentence, and document embedding are being actively conducted. Among them, cross-language transfer, which enables semantic exchange between different languages, is growing simultaneously with the development of embedding models. Academia's interests in vector alignment are growing with the expectation that it can be applied to various embedding-based analysis. In particular, vector alignment is expected to be applied to mapping between specialized domains and generalized domains. In other words, it is expected that it will be possible to map the vocabulary of specialized fields such as R&D, medicine, and law into the space of the pre-trained language model learned with huge volume of general-purpose documents, or provide a clue for mapping vocabulary between mutually different specialized fields. However, since linear-based vector alignment which has been mainly studied in academia basically assumes statistical linearity, it tends to simplify the vector space. This essentially assumes that different types of vector spaces are geometrically similar, which yields a limitation that it causes inevitable distortion in the alignment process. To overcome this limitation, we propose a deep learning-based vector alignment methodology that effectively learns the nonlinearity of data. The proposed methodology consists of sequential learning of a skip-connected autoencoder and a regression model to align the specialized word embedding expressed in each space to the general embedding space. Finally, through the inference of the two trained models, the specialized vocabulary can be aligned in the general space. To verify the performance of the proposed methodology, an experiment was performed on a total of 77,578 documents in the field of 'health care' among national R&D tasks performed from 2011 to 2020. As a result, it was confirmed that the proposed methodology showed superior performance in terms of cosine similarity compared to the existing linear vector alignment.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.919-928
• /
• 2022

As seen in the COVID-19 pandemic, unexpected emergence of new viruses presents serious concern on public health. Especially, the absence of effective vaccines or antiviral drugs against emerging viruses significantly increases the severity of disease and duration of viral circulation among population. Natural products have served as a major source for safe and effective antiviral drugs. In this study, we examined the virucidal activity of medical herb extracts with a view to discover novel antiviral agents with desired levels of safety and antiviral efficacy. Ethanol extracts of ten selected medical herbs were tested for antioxidant activity and in-vitro cytotoxicity in various animal cell lines. Of note, the herbal extracts showed broad and potent virucidal activities against rotavirus, hepatitis A virus, and influenza A virus. The extracts of Sorbus commixta and Glycyrrhiza uralensis showed strong virucidal activities against influenza A virus. We also examined whether the extracts of Sorbus commixta and Glycyrrhiza uralensis can be used as inactivating agents to prepare an inactivated viral vaccine. In a mouse model, influenza A virus inactivated by the extracts elicited high levels of neutralizing antibodies, and the vaccination provided complete protection against lethal challenge. These results suggest that herb-derived natural products can be developed to antiviral drugs as well as inactivating agents for preparation of inactivated viral vaccines.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.987-994
• /
• 2021

The Yellow sea, as described in article 123 of UNCLOS, is semi-enclosed sea surrounded by the Republic of Korea, the People's Republic of China and North Korea. In addition, the Yellow Sea is one of the 66 large marine ecosystems as it contains large amounts of marine resources. According to article 194 of UNCLOS, states should be aware of rights and duties with respect to the protection and preservation of the marine environment to be engaged with countries directly as regional entity or indirectly. Therefore, the legal blank is urgent in terms of trans-boundary environmental pollutant issues. The UNDP has conducted a project called Yellow Sea Large Marine Ecosystem (YSLME) which has reached the 2^nd phase. The project has some notable achievements, namely performing joint activities on analysis of diagnostic trans-boundary issues in collaboration with China and South Korea, developing a strategic action plan based on TDA, and establishing regional strategic action plan. However, on the other hand, the project could not reflect the full participation of North Korea as a state party. As a result, the project has a limitation on effective implementation of RSAP. Therefore, this study focuses on the suggestion of a legally-binding trilateral treaty as a blue print for the next, 3^rd phase of the project. By analyzing the best practice of the Wadden Sea Trilateral Treaty case, the study verifies the validity of legislative measures on establishing and managing a legally-binding trilateral YSLME Commission. By suggesting a three phase treaty, incorporating a joint declaration by establishing the commission, the signing of the treaty, and formulating an umbrella convention and implementation arrangement, the study expects to guarantee the consistency and sustainability of the trilateral treaty regardless of political issues pertaining to North Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.