• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1302-1306
• /
• 2007

여름철의 강우시 저수지에 주로 유입되는 고탁수층은 저수지내의 수체에 대하여 밀도차와 유속차를 가지며, 난류혼합을 일으키면서 주변수를 유입하며 하류방향으로 이송 확산되어 간다. 임하댐과 같은 대형 저수지는 수심이 30 m가 넘는 관계로 여름철에 2개의 수온약층이 존재한다. 따라서 댐체에 도달한 고탁수층은 저수지내의 밀도성층으로 인하여 주로 중층에 분포하게 되며, 가을철에 발생하는 수평확산과 전도현상으로 인해 저수지 전역에 분포하게 되어 탁질입자의 분포에 따라 탁수현상의 장기화를 유발하기도 한다. 이와 같은 탁수문제의 저수지내 대책으로는 홍수기에 고탁수층을 우선적으로 취수하는 방법이 있다. 고탁수층은 이와같이 수온약층과 밀접한 관계를 가지며, 취수탑 주변의 선택취수 결과에 영향을 받는다. 형성된 탁수층을 효율적으로 선택배제하기 위해서는 취수시설에 접근하는 성층흐름을 정확하게 이해해야 한다. 본 연구에서는 3차원 CFD를 사용하여 밀도성층에 따른 취수탑 주변의 접근흐름을 수치해석하여 방류수심, 방류유속 및 밀도성층구조의 선택배제에 대한 영향을 분석하였다. 임하댐 취수설비에 적용한 결과에 의하면 상층, 중층, 하층에서 취수탑 문비를 개도하였을 경우, 취수탑 주변에서만 유속이 증가하였을 뿐 저수지 내에서는 유속이 크게 증가되지 않은 것으로 나타났다. 하지만 문비 개도구간의 변화에 따라 수심별 유속분포는 크게 변화하는 것을 확인할 수 있다. 따라서 문비를 조절하는 것은 저수지 전체의 유동을 깨뜨리지 않으면서 취수탑 인근에서 선택취수가 가능하다는 것을 확인할 수 있었다. 또한 본 연구에서는 정밀한 현장조사를 수행하여 저수지와 방류수의 탁도변화를 모니터링하였으며, 취수탑 개구부 주변의 연직 유속분포를 측정하였다. 3차원 수치모의 결과와 현장에서 관측한 유속장을 비교함으로써 본 연구에서 제시한 실제 탁수배제능력을 검증하였다.를 구축하였다는데 의의가 있다.로와 접하는 건물의 경우 모서리부 광고 효과가 지배적이며 대부분 곡선돌출형이 사용되고 있었다. 그러므로 모서리 저층부를 필로티로 계획하여 보행흐름을 원활하게 하고 대신 입면을 투명하게 하여 간접광고(내부전시) 효과를 유도하는 것이 좋다. 특히 원형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.58-65
• /
• 2012

In this study, to reduce the motion of the vessels resulting from resonance and secondary undulation by long-period waves, numerical review on the control performance of resonator was carried out by attaching the resonator to the established harbor of real waters. In the numerical analysis, CGWAVE MODULE of commercial software SMS(Surface water Modeling System), a finite element model based on 2-dimensional elliptical mild slope equation was applied, and through comparative analysis of the existing experiments and analysis results on the rectangular model ports, the validity of the friction coefficients in which validity and effectiveness of SMS on the secondary undulation analysis is applied was verified. Based on this, the control performance of resonator was confirmed through comparative review of the secondary undulation according to whether or not to attach the resonator to rectangular harbor. In addition, to reduce long-period motion of the moored vessels and the secondary undulation which may occur in Pohang new port, the method to move the resonant period which causes abnormal motion of the vessels to long-term one was discussed through application of the resonators with various sizes, thereby identifying the availability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5550-5558
• /
• 2015

Recently, fuel cell with high energy efficiency and low CO2 emission is energetically interconnected with power system. Especially, FCGS(Fuel Cell Generation System) which usually operates at high temperature, is being developed and installed in the form of large scale system. However, it is reported that power system disturbances related to surge, harmonic and EMI have caused several problems such as malfunction of protection device and damage of control device in the large scale FCGS. In order to solve these problems, this paper presents a modeling of operation characteristics of FCGS by PSCAD/EMTDC, ETAP, P-SIM software. And also, this paper proposes countermeasure algorithms to prevent power system disturbances. From the simulation results, it is confirmed that the proposed algorithm is useful method for the stable operation of large scale FCGS.

• Journal of KIISE:Software and Applications
• /
• v.34 no.3
• /
• pp.255-265
• /
• 2007

In this paper, we propose a new illumination-robust drowsy driver monitoring system with single CCD(Charge Coupled Device) camera for intelligent vehicle in the day and night. For this system that is monitoring driver's eyes during a driving, the eye detection and the measure of eyelid movement are the important preprocesses. Therefore, we propose efficient illumination compensation algorithm to improve the performance of eye detection and also eyelid movement measuring method for efficient drowsy detection in various illumination. For real-time application, Cascaded SVM (Cascaded Support Vector Machine) is applied as an efficient eye verification method in this system. Furthermore, in order to estimate the performance of the proposed algorithm, we collect video data about drivers under various illuminations in the day and night. Finally, we acquired average eye detection rate of over 98% about these own data, and PERCLOS(The percentage of eye-closed time during a period) are represented as drowsy detection results of the proposed system for the collected video data.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.28-41
• /
• 2017

In this paper, the fast encoding algorithm in High Efficiency Video Coding (HEVC) encoder was studied. For the encoding efficiency, the current HEVC reference software is divided the input image into Coding Tree Unit (CTU). then, it should be re-divided into CU up to maximum depth in form of quad-tree for RDO (Rate-Distortion Optimization) in encoding precess. But, it is one of the reason why complexity is high in the encoding precess. In this paper, to reduce the high complexity in the encoding process, it proposed the method by determining the maximum depth of the CU using a hierarchical clustering at the pre-processing. The hierarchical clustering results represented an average combination of motion vectors (MV) on neighboring blocks. Experimental results showed that the proposed method could achieve an average of 16% time saving with minimal BD-rate loss at 1080p video resolution. When combined the previous fast algorithm, the proposed method could achieve an average 45.13% time saving with 1.84% BD-rate loss.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.231-240
• /
• 2008

In respect complication, group and period, the foreign direct investment of korea is composed of various factors. This paper studies focus on estimating the determinants of foreign direct investment of korea. The region of analysis consist of 7 groups, that is, Asia, Europe, Central and South America, Oceania, Africa, Middle East. Analyzing period be formed over a 67 point(2002. 6${\sim}$2007. 12). In this paper dependent variable setting up an amount of foreign direct investment, explanatory(independent) variables composed of gross domestic product, a balance of current accounts, the foreign exchange rate, employment to population ratio, an average of the rate of operation(the manufacturing industry), consumer price index, the amount of export, wages(a service industry). For an actual proof analysis, LIMDEP 8.0 software, analysis model is random effect in TWECR The result of estimating the determinants of foreign direct investment of korea provides empirical evidences of significance positive relationships between employment to population ratio and wages(a service industry). However this study provides empirical evidences of significance negative relationships between the foreign exchange rate, censurer price index and the amount of export. The explanatory variables, that is, an average of the rate of operation(the manufacturing industry), gross domestic product and a balance of current accounts, are non-significance variables.

• Spatial Information Research
• /
• v.5 no.2
• /
• pp.147-160
• /
• 1997

"The "Map Algebra", beeing recognized as a viable theoretical framework for GIS (Geographica Infonnation System), models map layers as "operands" which are the basic unit of geo-processing, and a variety of GIS commands as "operators." In this paper, we attempt at lifting some limitations of map algebras proposed in GIS literature. First, we model map layer as "function" such that we may employ the notion of meta operator (or, higher-order funtion) available in the functional programming paradigm. This approach provides map algebraic language with "programmability" needed in GIS user language. Second, we extend the semantics of, and improve on the sytactic structure of map algebraic language. Mer the data model and language associated with map algebra are formalized, we proceed to design and implement a prototype of map algebraic processor. The parser of the language in our prototype plays the role of transforming the native and heterogeneous user language of current GISs into a canonical map algebraic language. The prototype, named "MapSee" is a proof-of-concept system for the ideas we propsed in this paper. We believe that the uniform interface based on the map algebraic language will make promising infrastructure to support "Internet GIS." This is because the uniform but powerful interface through the Web clients allow access to both geo-data and geo-processing resources distributed over the network.to both geo-data and geo-processing resources distributed over the network.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.159-169
• /
• 2014

The purpose of PMO (Project Management Office) systems implementation in public sectors is to prevent the potential risks of IT projects with the project management for the electronic government, and to improve the quality of the project. As a leading country in software areas, PMO systems will play an important role to lead the best smart electronic government in the global world. This study suggested an operating model of PMO systems in public sectors in advance to use the PMO systems in public sectors by conducting a research investigating the key organizational role as the major factor which affects the behavioral intention of PMO systems implementation. We tested a hypothesis that Effort Expectancy factors and Facilitating Condition among the interested party groups will influence the Behavioral Intention of PMO systems implementation, and the result have given no difference to the Control Effect among the interested party groups. This study have shown that the interested party groups have common recognition about the Behavioral Intention of PMO systems implementation in the public sectors.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Journal of Korea Game Society
• /
• v.6 no.4
• /
• pp.55-61
• /
• 2006

Graphics rendering pipeline (application, geometry, and rasterizer) is the core of real-time graphics which is the most important functionality for computer games. Usually this rendering process is completed by both the CPU and the GPU, and a bottleneck can be located either in the CPU or the GPU. This paper focuses on reducing the bottleneck between the CPU and the GPU. We are proposing a method for improving the performance of parallel processing for real-time graphics rendering by separating the CPU operations (usually performed using a thread) into two parts: pure CPU operations and operations related to the GPU, and let them operate in parallel. This allows for maximizing the parallelism in processing the communication between the CPU and the GPU. Some experiments lead us to confirm that our method proposed in this paper can allow for faster graphics rendering. In addition to our method of using a dedicated thread for GPU related operations, we are also proposing an algorithm for balancing the graphics pipeline using the idle time due to the bottleneck. We have implemented the two methods proposed in this paper in our networked 3D game engine and verified that our methods are effective in real systems.