• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.760-766
• /
• 2008

As a backbone network, wireless mesh network (WMN) aims to provide reliable high throughput network connectivity to wireless users. Recent research has focused on routing and channel allocation to increase the capacity of wireless mesh backbones. Wireless mesh networking is an attractive solution for home, community, and enterprise networks as it is a self-configuring, instantly deployable, and lowcost networking system. In this paper, we empirically evaluate and analyze charateristic of WMN to establish WMN testbed by measurement. We use laptops and net4826 Soekris board widely used. Soekris boards are equipped with one network interface card (NIC) or above in our measurements. We also use paket generator, routing demon tools and so on. Throughout this measurements, we show limitation of Soekris board and software we use, and suggest guideline to establish WMN.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.71-78
• /
• 2008

In this paper, we implement the H.264/AVC baseline decoder by hardware-software partitioning under the embedded Linux Kernel 2.4.26 and the FPGA-based target board with ARM926EJ-S core. We design several IPs for the time-demanding blocks, such as motion compensation, deblocking filter, and YUV-to-RGB and they are communicated with the host through the AMBA bus protocol. We also try to minimize the number of memory accesses between IPs and the reference software (JM 11.0) which is ported in the embedded Linux. The proposed IPs and the system have been designed and verified in several stages. The proposed system decodes the QCIF sample video at 2 frame per second when 24MHz of system clock is running and we expect the bitter performance if the proposed system is designed with ASIC.

• Journal of The Korean Association of Information Education
• /
• v.20 no.1
• /
• pp.69-82
• /
• 2016

Block-based educational programming language(EPL) is commonly used due to its availability at low or no cost. It is also preferred tool of computing education due to its intuitive design, ease-of-use and its effectiveness in increasing algorithmic thinking abilities especially in elementary students. Physical computing is also necessary because it brings students closer to real-world problem solving by connecting the real world with the computing environment. However, due to high-cost and required knowledge in electrical engineering, many schools find the education difficult to access. The study shows significant increase in computational thinking abilities in both groups treated with EPL and additional physical computing education.

• The Journal of Korean Association of Computer Education
• /
• v.22 no.6
• /
• pp.11-18
• /
• 2019

Software education is required from elementary schools to prepare students for the fourth industrial revolution, which aims to improve algorithmic thinking. In general, teaching is divided into two stages: using a flowchart to design algorithms and implementing them through programming. However, converting a flowchart into code and checking the results in an educational programming tool is time consuming and requires additional programming activities. This study proposes a tangible coding tool that enables elementary students to convert algorithms designed at the unplugged activity into educational programming tool codes. This tool was developed in order for students to design algorithms at the level of assembling paper blocks and input them into a programming tool by taking a picture. Sixth graders were participated in this activity to evaluate its usability.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.793-799
• /
• 2004

Many researches and validations for the complexity metrics of the object-oriented systems have been studied. Most of them are aimed for the measurement of the partial aspects of the systems, for example, the coupling between objects, the complexity of inheritance structures, the cohesion of methods, and so on. But the software practitioners want to measure the complexity of overall system, not partial. We studied the complexity of the overall structures of object-oriented systems by analyzing the class diagram of UML. The class diagram is composed of classes and their relations. There are three kinds of relations, association, generalization, and aggregation, which are making the structure of object-oriented systems to be difficult to understand. We proposed a heuristic metric to measure the complexity of object-oriented systems by putting together the three kinds of the relations. This metric will be helpful to the software developers for their designing tasks by evaluating the complexity of the structures of object-oriented system and redesigning tasks of the system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.248-261
• /
• 1997

Ultrasonic pattern recognition is the most effective approach to the problem of discriminating types of flaws in weldments based on ultrasonic flaw signals. In spite of significant progress in the research on this methodology, it has not been widely used in many practical ultrasonic inspections of weldments in industry. Hence, for the convenient application of this approach in many practical situations, we develop an intelligent ultrasonic signature classification software which can discriminate types of flaws in weldments based on their ultrasonic signals using various tools in artificial intelligence such as neural networks. This software shows the excellent performance in an experimental problem where flaws in weldments are classified into two categories of cracks and non-cracks. This performance demonstrates the high possibility of this software as a practical tool for ultrasonic flaw classification in weldments.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.38-45
• /
• 2012

If an infant with congenital hearing loss is diagnosed in good time and get proper treatment as soon as possible, treatment effect could be maximized and the social costs could be considerably reduced. For these reasons, the medical equipment to screen hearing impairment objectively is needed. The ABR(auditory brainstem response) is typical diagnostic tools for this purpose but there are drawbacks in sense that it does not have frequency specificity and shows hearing information of usually high frequency band. The ASSR(auditory steady-state response) is excellent in frequency specificity, but the rate of wrong diagnosis is slightly high. In this study, we proposed the system which can measure both the ABR and the ASSR, and can show the objective and quantitative indices(Fsp and F-test). It was designed to allow various tests without hardware modification by minimizing hardware components and by increasing software roles. The objective assessment of the developed system was evaluated by experiments with 10 normal persons.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.77-86
• /
• 2017

Industry Foundation Classes(IFC) is the core product schema for ensuring the interoperability of information in Building Information Modeling(BIM) environment. However, since current IFC is mainly focused on building structure. there are limitations in the generation of functional information of components when applied to civil infrastructures. Previous studies have proposed IFC-based new entities for the civil infrastructures, it takes long time to support them in BIM authoring software packages. In this study, we proposed practical rules to apply IFC-based information modeling using BIM authoring software and additional new entities for the civil infrastructure through attributes and information mapping. The availabilities of proposed method were examined using the rail and sleeper information models based on an extended IFC data schema for the railway infrastructures.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.1 s.3
• /
• pp.91-107
• /
• 2000

Geographic Information Systems(GISs) generally use a very large amount of spatial data. and are implemented on various software and hardware system. If it is impossible to exchange the spatial data efficiently among the different hardware, software, and operation systems, data sharing will be very difficult and duplicated storage & management of the spatial data will result in a great economic loss. To solve such problems, a national organization established a national standard for GIS and constructed spatial databases at the national level. In Korea, SDTS(Spatial Data Transfer Standard) is selected as a national standard for the common data transfer format. In this paper, we design and implement a SDTS Data Management System which can support display, insertion, update, deletion of SDTS data, extraction and creation of a specified area, error checking and reporting, setting and verification of a SDTS profile through the GUI (Graphic User Interface) environment. Hereafter, as GIS industry is continually activated and a demand for the SDTS data increases, a requirement for analysis and trust of the SDTS data will grow bigger, so the necessity of the SDTS Data Management System developed in this paper will also grow rapidly.