• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.97-104
• /
• 2017

In this paper, we designed and fabricated the multi band Transceiver Assembly(TCA) for the Multi Channel Synthetic Aperture Radar(MCSAR) containing C-band, X-band, Ku-band and we researched to verify electrical performance of TCA. The transceiver consists of transmitters, receivers, signal selection modules for each band, and stability oscillator, frequency synthesizer, controller, power distributor. The transceiver has a receive path selection and bandwidth selection functions in accordance with the operating mode. And the transceiver can transmit and receive all three bands simultaneously, each band has a bandwidth of up to 300 MHz. Final transmission output of transceiver for each band is over 20 dBm to be suitable for driving the T/R module. Receiver bandwidth is selected according to the required function and receiver gain has approximately C-band 52 dB, X-band 50 dB, Ku-band 60 dB, the maximum noise figure of Ku-band V polarization is 4.28 dB in the whole band H, V polarization. As a result of the electrical performance test, a multi-band TCA is satisfied the property requirements of the MCSAR.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.63-67
• /
• 2016

In this paper, we present an indirect method of elastic modulus measurement for various lamination layers formed on polymer-based compliant substrates. Although the elastic modulus of every component is crucial for mechanically reliable microelectronic devices, it is difficult to accurately measure the film properties because the lamination layers are hardly detached from the substrate. In order to resolve the problem, 3-point bending test is conducted with a film-substrate specimen and area transformation rule is applied to the cross-sectional area of the film region. With known substrate modulus, a modulus ratio between the film and the substrate is calculated using bending stiffness of the multilayered specimen obtained from the 3-point bending test. This method is verified using electroplated copper specimens with two types of film-substrate structure; double-sided film and single sided film. Also, common dielectric layers, prepreg (PPG) and dry film solder resist (DF SR), are measured with the double-sided specimen type. The results of copper (110.3 GPa), PPG (22.3 GPa), DF SR (5.0 GPa) were measured with high precision.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.383-390
• /
• 2006

Product-line engineering is a dreaming goal in software engineering research. Unfortunately, the current underlying technologies do not seem to be still not much matured enough to make it viable in the industry. Based on our experiences in working on mobile telephony systems over 3 years, now we are in the course of developing an approach to product-line engineering for mobile telephony system software. In this paper, the experiences are shared together with our research motivation and idea. Consequently, we propose an approach to building and maintaining telephony application logics from the perspective of scenes. As a Domain-Specific Language(DSL), Menu Navigation Viewpoint(MNV) DSL is designed to deal with the problem domain of telephony applications. The functional requirements on how a set of telephony application logics are configured can be so various depending on manufacturer, product concept, service carrier, and so on. However, there is a commonality that all of the currently used telephony application logics can be generally described from the point of user's view, with a set of functional features that can be combinatorially synthesized from typical telephony services(i.e. voice/video telephony, CBS/SMS/MMS, address book, data connection, camera/multimedia, web browsing, etc.), and their possible connectivity. MNV DSL description acts as a backbone software architecture based on which the other types of telephony application logics are placed and aligned to work together globally.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.603-613
• /
• 2010

The Domi Basin in the South Sea of Korea is located between the Jeju Basin and Ulleung Basins, and is characterized by several sediment sags that are interested to have formed by crustal extension. This paper aims to derive an optimized seismic data processing procedure which helps stratigraphic interpretation of the Domi Basin. In particular, our data processing flow incorporated horizon velocity analysis (HVA) and surface-relative wave equation multiple rejection (SRWEMR) to improve the quality of stack section by enhancing the continuity of reflection events and suppressing peg-leg multiples respectively. As a result of processing procedures in this study, unconformities were recognized in the stack section that defines the early and middle Miocene, Eocene-Oligocene sequences. In addition, the overall quality of the stack section was increased as essential data to investigate the evolution of the basin. The suppression of multiple resulted in the identification of the Cretaceous basement. The data processing scheme evaluated through this study is expected to improve the standardization of processing sequences for seismic data from the Domi and adjacent Sora and north-Sora Basins.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.712-722
• /
• 2018

This paper conducts parametric studies on flapping wing design, one of the most important design parameters of insect-mimicking aerial vehicles. Experimental study on wing shape was done through comparison and analysis of thrust, pitching moment, power consumption, and thrust-to-power ratio. A two-axis balance and hall sensor measure force and moment, and flapping frequency, respectively. Wing configuration is biplane configuration which can develop clap and fling effect. A reference wing shape is a simplified dragonfly's wing and studies on aspect ratio and wing area were implemented. As a result, thrust, pitching moment, and power consumption tend to increase as aspect ratio and area increase. Also, it is found that the flapping mechanism was not normally operated when the main wing has an aspect ratio or area more than each certain value. Finally, the wing shape is determined by comparing thrust-to-power ratio of all wings satisfying the required minimum thrust. However, the stability is not secured due to moment generated by disaccord between thrust line and center of gravity. To cope with this, aerodynamic dampers are used at the top and bottom of the fuselage; then, indoor flight test was attempted for indirect performance verification of the parametric study of the main wing.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.3
• /
• pp.109-114
• /
• 2011

A breeding population of Quercus glauca has been established via simple direct selection. Seedlings from naturally crossed seeds of 35 selected families growing in Jeju Island were placed using stroll repeated planting into two experimental forest located at Hannam and Sanghyo in Jeju. After 3 years of planting, characteristics of growth were examined. Growth pattern of trees in Sanghyo was better than those in Hannam. The average heights of filial were 66.8 cm in Hannam and 92.5 cm in Sanghyo. Root collar diameters of filial in Hannam and Sanghyo were 9.3 mm and 12.2 mm, respectively. A great weather differences especially in precipitation and temperature were shown between two test sites. The result of difference of growth pattern between two sites could be useful in provenance adaptability test. Data within families and individuals obtained from this study was also useful for establishment of seed orchard of Q. glauca.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2925-2930
• /
• 2011

A vehicle fuel economy is very important issue in the view of fuel cost and environmental regulation. The fuel economy is much improved according to the development of electric, electronic and mechanical technology, but up to now the measurement of it tests the given mode(LA-4, FTP-75, etc) within computer simulation program and engine dynamometer. This fuel economy is different with it of real road. The one of main reason is not considered the gradient of the road. To estimate the effects of fuel economy at highway with gradient in this paper, we measure the amount of fuel consumption and calculate the fuel economy of it with running the Youngdong highway with high gradient. Also this paper analysis and compares the fuel economy with gradient and without gradient when the vehicle runs the same driveway. Then we calculate the total energy created the difference of fuel consumption amount of the two cases and calculate the consumpted energy by tire driving force from the torque and power of engine in the simulation. This paper verifies the relation of the driving force and the total energy by creating the difference of fuel consumption amount. This paper also proposes the method of fuel economy improvement despite of gradient at the result.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.18-24
• /
• 2020

The purpose of this study is to validate thermal hinderance effects, i.e., feasibilities, of fire-proof structure for LPG tank exposed to fire from adjacent burning building. The panel materials suggested for the fire-proof structure are (1) 10 mm-thick wood, (2) wood with fireproof coating, (3) 75 mm-thick Expanded Polystyrene, (4) 75 mm-thick glass wool filled sandwich panel, and (5) 75 mm-thick autoclaved lightweight concrete. The square planar fire source of 1 ㎡, a matrix of nozzles releasing 120-140 g/s of LPG, is used to heat up the wall and the tank beyond, mimicking heat transfer from burning exterior wall finishes. The feasibility is tested by inspecting structural integrity after test, and then by examining temperatures at both sides of panels and tank's front surface as well as heat fluxes. As a result, it can be concluded that, among the suggested sample materials, fire-proof wall with ALC panel only showed the feasibility for explosion prevention with the proven evidences of structural integrity and least increase in temperature of tank.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).

• Proceedings of the Technology Innovation Conference
• /
• 2005.02a
• /
• pp.158-175
• /
• 2005

정부지원 R&D 프로그램에 대한 성과평가는 과학기술혁신을 위한 정부투자의 규모가 확대되면서 동시에 그 수요가 증가하고 있다. 본 연구는 국내외에서 시행되고 있는 정부 R&B 프로그램의 성과평가에 대한 체계를 비교분석함으로서 올바른 성과평가의 틀에 관한 시사점을 제공하는데 목적이 있다. 각 프로그램을 비교분석하기에 앞서 성과평가와 관련한 일반적인 이론들을 살펴봄으로써 R&D프로그램에 대한 성과평가가 갖추어야 할 이론적인 체계에 대해 살펴보았다. R&D 프로그램의 성과평가를 위해서는 R&D 활동 자체가 혁신시스템 안에서 수행되고, 집행과정에서 그 효과가 증폭되어 혁신시스템을 변화시킬 수도 있기 때문에 일반적인 정책평가 이론 외에도 혁신시스템 이론을 함께 고려할 필요가 있다. 혁신시스템적 사고방식하에서 올바른 성과평가를 수행하기 위해서는 일반적인 평가기준으로 서 제시되는 적합성, 효율성, 효과성의 각각에 대해 혁신시스템적 기여도에 대한 고려가 충실히 반영되어 있어야 한다. 예를 들어 혁신시스템의 모든 요소들을 포함하는지, 환경적인요인을 고려했는지, 혁신 요소들 간에 형성된 네트워크에 대해 충분한 고찰을 하고 있는지 등이 여기에 해당한다. 실증연구에서는 이러한 것들이 모두 반영되었는가에 초점을 맞춰 각 국가 별 R&D 프로그램에 대한 성과평가를 분석하였다. 분석 대상은 해외와 국내의 주요 R&D 프로그램으로 비교적 성과평가가 활발하게 진행되었던 사례들을 선정하였다. 이러한 평가에 대한 평가, 즉 메타평가를 통해 각 프로그램의 성과평가가 가지는 특성을 밝히고 이들을 비교하여 적절한시사점 이 도출하였다. 이들 사례를 비교 분석한다면 그 결과를 바탕으로 하여 혁신시스템을 고려한 성과평가의 일반적인 모형을 제시할 수 있을 것으로 기대한다. 나아가 추후에 진행될 R&D 프로그램에 대한 성과평가에서도 본 연구에서 제시한 일반 모형을 응용함으로써 조금 더 체계화된 성과평가가 이루어질 수 있을 것으로 기대한다.결과 관점간 가중치의 우선순위가 동일할 경우 현행 평가제도는 연구기관의 의견이 반영되었다고 볼 수 있으나, 검증결과 관점간 가중치가 다르게 나타났다. 또한, 추가적인 분석에서 연구회별 관점의 가중치와 소속 연구기관별 관점의 가중치를 분석한 결과 일부 연구기관에서는 연구회의 가중치와달리 나타났다. 따라서, 현행 기관평가제도는 일부 연구기관의 특성이 충분히 반영되지 않아서 유효한 평가제도로 볼 수 없다고 하겠다. 본 연구의 결과에 따라 출연연구기관의 기관평가지표에 대한 각 지표별 가중치와 지표 문항 개선시 유용한 자료로 활용되리라 본다.로 하기 때문에 원가를 절감할 수 있다.환경현안에 대한 정치경제적 접근을 외면하지 말고 교과서 저작의 소재로 삼을 수 있어야 하며, 이는 '환경관리주의'와 '녹색소비'에 머물러 있는 '환경 지식교육'과 실천을 한단계 진전시키는 작업으로 이어질 것이다. 이후 10년의 환경교육은 바로 '생태적 합리성'과 '환경정의'라는 두 '화두'에 터하여 세워져야 한다.배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으며, 방제가 조사결과 진딧물, 응애 등 껍질이 연약한 곤충의 방제에 효과적인 것으로 나타났다. 따라서 제조된 살충비누를 활용하면 환경친화적인 해충방제가 가능하다고 판단되었다.능을 충진시켜서 암세포를 파괴시킨다. 또한 콜로니 자극인자인 사이토카인을 생산시켜서 면역담당세포의 신생을 촉진시키기도 하며, 암의 화학요법과 방사선 요법으로 저하된 백혈구를 회복시키는 역할을 한다. 따라서 최근의