• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.172-175
• /
• 2011

본 연구에서는 현장검사 (Point-of-Care Testing, POCT)를 목적으로 측방 유동 검사 스트립의 피크들을 분리하는 템플릿 정합법을 제안한다. 템플릿은 스트립의 제어 리건드 선과 대상 리건드 선 간격으로 떨어져 있는 두 개의 펄스로 구성된다. 이 템플릿을 스캔신호와 정합시켜 최대 응답 위치에서 피크들의 중심을 찾고, 주어진 위치에서 피크들을 분리한다. 제안한 방법을 바디텍메드사의 당화 혈색소 면역 검사 스트립과 동사의 형광 스트립 리더기에 적용하여 농도 측정 성능에 미치는 영향을 기존에 구현된 방법과 비교 검토하였다. 실험 결과 본 연구에서 제안한 방법은 장치나 검사 스트립에 종속적인 매개변수가 필요한 기존 방법과 동등한 성능을 보였다.

• Bulletin of the Korean Institute for Industrial Safety
• /
• v.2 no.1
• /
• pp.31-33
• /
• 2002

국내 사업의 현대화와 아울러 건설에서는 고층화가 이루어지고 있으므로 이에 따른 리프트 및 크레인이 다양하게 많이 사용되고 있고 더욱 사용빈도가 빈번하게 이루어지는 추세이므로 이에 따라 산업재해도 여러 형태로 빈번히 발생이 되고 있는 경향이다. 또한 장치 산업인 산업설비가 발전함에 따라 고압압력용기가 초고압으로 변하여가고 있으므로 이에 따라 발생되는 사고의 영향은 이미 많은 사고 사례에서 볼 수 있는 것과 같이 중대재해가 발생된다. 이에 대한 사고 방지를 위한 검사 기준도 새로운 현실에 적합한 기준개정이 필요하게 되었다. 그러므로 유해·위험한 기계·기구 및 설비의 검사 기준인 리프트, 크레인 및 압력용기 제작기준·안전기준 및 검사기준을 최근 새로운 국내의 실정에 따라 이에 적합하도록 개정이 필요하게 되었다. 특히, 지진 등으로 인한 대형사고를 예방하기 위하여 지진하중 등에 관한 검사항목을 보완한 것에 대한 개정전후의 비용편익분석을 실시하여 개정으로 인하여 관련사업장의 미치는 영향을 확인하고, 편익분석을 함으로서 손익을 정확히 판단하는 것이 기업주나 정책입안자에게 매우 필요하다 하겠다.(중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.489-492
• /
• 2007

전자의무기록(EMR)[1]을 도입한 이후 현재 의료장비의 EMR 연동상황이 극히 미비한 상태로 대두되고 있다. 종합병원 의료장비의 약 30%정도는 검사 결과물이 출력이 안되고 보여지기만 하는 구조로 되어 있어 직접 수기로 EMR 에 연동할 수 있는 소프트웨어에 입력하여 EMR 에 연동하고 있으며, 약 60%는 의료장비에서 프린터 혹은 시리얼통신으로 데이터를 출력할 수 있는 구조로 되어있다. 하지만 의료장비의 노후화 및 검사결과물의 인터페이스 특성이 다양하기 때문에 쉽게 연동하지 못하고 있으며, 대부분 종이 출력 결과물을 스캔을 통해 이미지를 저장하거나 받아서 EMR 에 연동하고 있다. 그 외 나머지 10%는 의료장비 자체의 저장장치 또는 네트워크를 통해 검사결과 데이터를 EMR 에 전송하는 구조로[2] 되어있다. 본 논문에서는 의료장비의 프린터를 통한 결과물을 EMR 에 연동하기 위한 인터페이스 솔루션을 구현하고, 검사결과의 출력 데이터를 이미지 복원 및 관리하는 방법을 통해 많은 수의 의료장비의 출력 데이터를 EMR 연동을 하여 인력 및 기타 사무용품의 소모를 줄이며, 검사결과를 실시간 진단할 수 있는 방법을 제시한다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.313-320
• /
• 2013

Purpose: This study compared the quantity of phoria for distance by new method with that by existing methods. Methods: For this study, it was selected to two existing phoria measurements, von Graefe and Maddox rod. And new method named "3D polarizing phoria measurement" was designed to measure the quantity of phoria using polarizing glasses and 3D display. Unlike existing measurement using polarized lens, newly considered method measured the quantity of phoria in condition removed perfect binocular fusion using field stop on apparatus and polarized lens. For using new method for distance, it was developed a phoria test chart. It supports three kinds of phoria measurements. Subjects were 12 (male 6, female 6). They had three phoria tests (1 sets) including new method. It was considered the effect of experimental order, so we tested all cases about experimental order. The number of cases was 6 sets, and the sample size in this experiment was 72 sets. For removing binocular fusion, lighting of the laboratory that was below 10 lx and the background color of phoria test chart was dark, RGB=(20, 20, 20). Results: Subjects were sorted into three groups. Samples with exophoria and orthophoria were 30 sets each, and those with esophoria were 12 sets. The quantity of phoria measured three tests differ from each other like "newmethod < von Graefe < Maddox rod", and there were statistically significant difference each other. Conclusions: This study has great significance in the sense that new method was the measurement with naturally removing binocular fusion without dizziness during the tests.

• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.53-59
• /
• 2007

A safety management rule of the diagnosis radiation system which opened a court 2006 February 10th was promulgated for safety of the radiation worker, patients and patients' family members. The purpose of this study is to minimize injury by radiation that can happen to patients and people around a sick ward when managing mobile X-ray system. This study analyzed sickroom environment of mobile X-ray examination and the statistical data of the Konkuk medical Information System(KIS) and the Picture Archiving Communication System(PACS). This study also investigated patient conditions, infection, relation information and related data, when the sickroom mobile X-ray examination is used. Through data analysis, many problems were expected such as restriction of space side, manpower and expense of business side, satisfaction degree decline of patient and protector of operation side. Therefore, we tried to restrict examination of multi bed sickroom, and to use treatment room in each ward to solve problem mentioned. As a result, the whole sickroom mobile X-ray examination rate decreased to near 50%, and mobile X-ray examination rate for inpatients decreased to more than 85%. This study shows that several attempts we did should be helpful for manpower, patients satisfaction and expenses. Also, they should protect patients in sickroom from unnecessary radiation exposure and could minimize inconvenience of patients and their family members from x-ray examination.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.552-559
• /
• 2011

Recently, the eddy current testing(ECT), alternating current field testing, magnetic flux leakage testing and remote field testing have been used as a nondestructive evaluation method based on the electromagnetic induction phenomenon. The eddy current testing is now widely accepted as a NDE method for the heat exchanger tube in the electric power industry, chemical, shipbuilding, and military. The ECT system mainly consists of the synthesizer module, analog module, analog-to-digital converter, power supplier, and data acquisition and analysis program. In the previous study, the synthesizer module and the analog module which is essential to the ECT system were primarily developed, and in this study the data acquisition and analysis program were developed. The operation system for this program is based on the Windows 7, and optimized for the Korean users, and the specific feature of this program using setup wizard enables inspector to make a setup easily for acquisition and analysis of ECT data. In this paper, the configuration and functions of eddy current data acquisition and analysis program will be introduced.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.11-16
• /
• 2008

In this paper, firstly we made of the rapid thermal processor equipment with the specifically useful structure to measure wafer stress. Secondly we made of the laser interferometry to inspect the wafer surface curvature based on the large deformation theory. And then the wafer surface fringe image was obtained by experiment, and the full field stress distribution of wafer surface comes into view by signal processing with thining and pitch mapping. After wafer was ground by 1mm and polished from the back side to get easily deformation, and it was heated by three to four times thermal treatments at about 1000 degree temperature. Finally the severe deformation between wafer before and after the heat treatment was shown.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.32-40
• /
• 2006

Dynamic Radioscopy technique was developed to observe internal phenomena of motors during firings. For use of this technique, generator and image box consisting of conversion screen, mirror, and video camera were designed and fabricated at our laboratory, and static firing tests were conducted to small motors. Protection devices against vibration and noise induced from during combustion were also made and their performances were evaluated with reference to the vibration criteria. Test results have shown that the vibration levels at concerned points were measured less than vibration criteria, and the internal phenomena during firings were also observed clearly.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.55-60
• /
• 2017

This paper presents the motorcycle inspection standards of electrical system, frame & body, lights and speedometers. 187 real-world motorcycles are visually and mechanically inspected according to the developed inspection standards. The non-compliance rate of inspection standards of the lights is 23.7% and main causes are damage, tinting, painting and coloration of head-lamp, number plate lamp, front-rear position lights, stop lamp and direction indicators of motorcycles. Also, 28.4% of motorcycles are dropped from the luminous intensity inspection standard. Motorcycle electrical system cannot be visually inspected. The motorcycle inspections standards are improved reflecting 187 cases of real-world motorcycle inspection results.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.419-424
• /
• 2005

This paper has performed fatigue and nondestructive test of bogie frame for Korean tilting train. Before the fatigue test, static tests were carried out. From the test, the structural safety was investigated using Goodman diagram. After the static test, the fatigue test were conducted under tilting load conditions. The fatigue test was conducted for $10{\times}10^6$ cycles. During the fatigue test, the nondestructive tests using magnetic particle and liquid penetrant were performed at $6{\times}10^6$ cycle and $10{\times}10^6$cycle. From the crack detection tests, it was known that there was no fatigue crack in the bogie frame.