• Electronics and Telecommunications Trends
• /
• v.30 no.5
• /
• pp.22-27
• /
• 2015

도로함몰 사고 증가를 계기로 지하 구조물의 안전 관리 방법, 특히 비파괴 검사 장비에 대한 관심이 고조되고 있다. 지중투과 레이더 기술은 전자파의 투과, 반사 특성을 이용한 비파괴 검사 기술로써 투과 깊이, 투과 해상도 등 비파괴 검사 성능 측면에서 가장 주목받고 있는 기술이다. 본고에서는 지중투과 레이더 기술의 특징, 국외 제품 동향을 살펴본다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3626-3632
• /
• 2010

Some design changes were made to enhance the uniformity of temperature distribution inside the chamber of semiconductor test equipment. The design changes include the installation of adjustable airflow controller inside the chamber, the alignment of the centers of heater and match plate, the change in the size and the shape of holes in match plate base, and the addition of new holes of 2 mm diameter in order to allow airflow directly to the temperature sensors. In order to verify their effects, the temperature distributions inside the chambers were measured using 32 RTD sensors before and after the design changes. The temperature distributions were in the ranges of 87.1 to $91.5^{\circ}C$ ($90{\pm}2.9^{\circ}C$) and 89.5 to $90.8^{\circ}C$ ($90{\pm}0.8^{\circ}C$) before and after the design changes, respectively. The above temperature distribution after design changes was maintained for longer than 15 minutes, which satisfied the target temperature range of $90{\pm}1^{\circ}C$ for longer than 10 minutes.

• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.49-54
• /
• 2017

As the Radiofrequency(RF) increases with the magnetic field strength, the wavelength of the RF excitation field becomes smaller, which leads to more the thermal effect in the human-body placed in the electric field. MRI scanner used was GE signa 1.5T, HDx 3.0T and Philips 3.0T with same routine clinical sequence protocol. Therefore temperature was measured before and after each scan. Taken the temperatures in the ear with ear infra-red type thermometer(Braun co). 3.0T were temperature increases more than $0.15^{\circ}C$ and GE 3.0T MRI equipment about $0.14^{\circ}C$ higher than the Philips 3.0T MRI(p<0.012). Psychogenic status was investigated by the survey respondents about their status can not just answer therefore, a little different from the expected. In our study of Thermal effect of clinical MRI with clinical protocol sequence, we found that the 3.0T in the body-temperature rise was greater than the 1.5T. Therefore, in clinical 3.0T examine the dangerous situation caused by the temperature rise occurred (burns, impaired thermoregulatory mechanism in patients with high-temperature damage, exhaustion occurs due to excessive sweating), not to appear the more watched the patient's condition with procedure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2003

An eddy current testing system was developed for detection of flaws in the ferromagnetic steel tubes. Because the eddy current signals from the ferromagnetic steel tubes could be distorted easily due to an irregularity of magnetic permeability, magnetic saturation is required to suppress this variation of magnetic fields. A magnetic saturation probe with the Hemholtz coil was designed for the inspection of the steel tubes. The bandwidth pass filters were adapted to minimize the noise from the DC magnetization. When using the designed test probe, the flaw signals could be discriminated from the noise. The system was tested at the production line and showed a capability of detecting flaws, like a drilled hole of the diameter of 2.0mm at the moving speed of 1m/sec.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.525-531
• /
• 2021

The importance and utilization of underground spatial is increasing due to urban concentration. And so underground spatial information is being built. Because underground spatial information is an important NSDI (National Spatial Data Infrastructure), the accuracy and performance of underground spatial exploration devices used for construction are managed separately. In accordance with the laws and regulations related to spatial information, the government is conducting performance tests for underground facilities surveying equipment. The current performance test site mainly targets metal pipelines, and there is no absolute position surveying inspection system. In this study, test bed model for performance inspection of underground space exploration equipment was presented. The test bed presented in this study can be used as a test site to supplement the limitations of the existing domestic test bed and to verify the performance of the latest equipment.

• Nuclear industry
• /
• v.7 no.7 s.53
• /
• pp.96-97
• /
• 1987

• 물만먹고자라요
• /
• no.5
• /
• pp.9-11
• /
• 1998

• Information Display
• /
• v.7 no.2
• /
• pp.3-9
• /
• 2006

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.45-50
• /
• 2013

Recently, as the market for SMART TV expands, the camera is embedded for providing various user experience. However, this leads to occurrence of camera failure due to TV power up sequence problem, which are usually not detectable in conventional test equipments. Although the failure-detection can be possible by re-generating control signals for audio interface with new equipment, it is expensive and also requires much time to test. In this paper, for SMART TV, FPGA(Field Programmable Gate Array)-based failure-detection system is proposed which can lead to reduction of both cost and time for test.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.58-61
• /
• 2011

방송 콘텐츠 제작에는 카메라, VCR, NLE, 인코더 등의 장비가 사용되고 있으며, VCR 헤더 불량, 테이프 노후화/보관불량, NLE 편집 오류, 인코더 장비 불량 등의 다양한 이유로 콘텐츠에 예기치 않은 비디오 및 오디오 오류가 발생할 수 있다. 이러한 문제점을 해결하기 위하여 콘텐츠에 포함된 다양한 비디오 및 오디오 오류를 자동으로 검사할 수 있는 자동 검사 시스템이 요구된다. 본 논문에서는 이러한 다양한 오류를 자동으로 검사할 수 있는 방법 중 특히 비디오 내에 종종 포함되는 블록 오류를 대상으로 하는 고속 오류 검출 방법을 설명한다. 제안한 방법은 비디오 내의 매 프레임의 코너 수를 계산하고, 시간 증가에 따른 코너 수의 변화량을 검사하여 블록 오류가 포함될 것으로 예상되는 후보 프레임을 찾는 1단계 과정과, 후보 프레임을 대상으로 Adaboost 인식 기술을 사용하여 학습한 분류기를 통해 최종 블록 오류가 포함된 프레임을 검출하는 2단계 과정으로 구성된다. 시스템 구현 실험 결과, 비디오 내에 포함된 블록 오류를 프레임 단위로 정확하게 고속 검출 하는 것이 가능함을 확인하였다. SD급의 경우 실시간 대비 2.3배속 가량의 고속 검사가 가능하고 HD의 경우에도 0.8배속 수준의 고속 검사가 가능하였다.