• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.7
• /
• pp.475-484
• /
• 2018

The propulsion control device of an electric railway vehicle is a key main component corresponding to an engine of an automobile, and a device for controlling this is a device called a GDU (Gate Drive Unit). Also, when the frequency of failure of the propulsion control system was analyzed, the nonconformity ratio of GDU was the highest. GDU was not able to access core technologies due to the introduction of foreign products, and there were general problems with overall maintenance activities due to discontinuation of GDU of the manufacturer. The GDU has reached the end of its life with 23 to 14 years of long-term use.In order to solve these problems, this study was designed to identify the proper life span by analyzing compatible GDU's acquisition and failure, and to improve the existing system of maintenance focusing on health inspection. Maintenance of the components with a short life span compared to the entire service life is essential. Most foreign parts introduced at the beginning of the construction are not replaced due to technical problems or long-term operation. However, due to the characteristics of railway vehicles with a long life span of more than 25 years, it is necessary to maintain them for a long period of time. The study should be more concrete and empirical. The replacement type GDU of capacitors was able to easily measure the life of the capacitance by removing the capacitor modules, measure the life span of each unit test, and accurately perform preventive maintenance of the capacitor.

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.241-245
• /
• 1983

PraziquantEI ($Distocide^{\circledR}$), the KcrEan product, was tEstEd for its safety and Efficacy in treatmEnt of Clonorchis sinensiJ infccticn during the period from April to SeptembEr, 1983 in Korea. A total of 55 egg positive cases were selected and treated with the regimen of 25 mg/kg t.i.d. for 1 day (total 75 mg/kg). The follow-up stool examination was done in 47 cases by cellophane thir;k smear and Stoll's egg counting techniques. The 8 uncured cases were treated again with the same regimen. The laboratory tests for blood picture and liver function were done in 27 cases and compared before and after the treatment. The results obtainEd are as follows: 1. After single course treatment, the cure and egg reduction rates were 83.0 and 99.1% respectively. With the second treatment, excellent results of 100% in both rates were obtained. 2. Several kinds of side effects such as dizziness, headache, etc. were complained by 29 cases (61.7 %), however, those were so mild and transient that no special treatment was necessary. 3. No significant change in laboratory findings was recognizable before and after the treatment. From the above results, it is concluded that $Distocide^{\circledR}$ is as effective and safe as $Biltricide^{\circledR}$ and highly recommendable in treatment of C. sinensis infection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4425-4433
• /
• 2011

The purpose of this study was to explore the relation of BMI, smoking and drinking with biomedical parameters in 20s and 30s men. This was a retrospective exploratory study and the subjects were 603 men who participated in health check-up for clinical trial at a tertiary hospital between October 2006 and June 2011. RBC, hemoglobin(Hb), hematocrit(Hct), triglyceride(TG), uric acid(UA), ALT in obese group were significantly higher than those of normal weight group. WBC and Hb in smokers were significantly higher than those of nonsmokers, protein in smokers was significantly lower than that of nonsmokers. Platelet in moderate smokers who smoke 10~19 cigarettes a day was significantly higher than that of nonsmokers and light smokers who smoke below 10 cigarettes a day, albumin in moderate smokers was significantly lower than that of nonsmokers and light smokers. TG in moderate smokers was significantly higher than that of nonsmokers, and blood glucose(BG) in moderate smokers was significantly lower than that of nonsmokers. AST and ALT in drinkers who drink over 10g a day were significantly higher than those of nondrinkers. In regression, BMI was significant factors of increasing RBC, Hb, Hct, total cholesterol(TC), TG, BG, UA, AST and ALT. Smoking amount was significant factors of increasing WBC, Hb, Hct and TG, and was significant factors of decreasing BG and Ca. Smoking amount was significant factors of increasing TC, AST and ALT, and was significant factors of decreasing WBC. In conclusion, there was significant relations of BMI, smoking, and drinking with biomedical parameters such as Hb, TC, TG, and ALT in young-aged men. Therefore, practice of healthy lifestyle activities to include preventing obesity and heavy drinking, and quitting smoking needs to the 20s and 30s men for preventing lifestyle disease.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.977-984
• /
• 2009

Campbell Early grapes, the major grape variety in Korea, contain 13 - 15% (w/v) sugar, which is lower than that appropriate for fermentation of red wine. Therefore, chaptalization with sucrose is usually used to increase the sugar level to an extent adequate to produce a wine containing about 12% (v/v) alcohol. In the present study, fermentation of freeze-concentrated Campbell Early grape juice at $25^{\circ}Brix$ was investigated using several industrial wine yeasts including Saccharomyces cerevisiae OC2, S. cerevisiae Fermivin, and S. cerevisiae W-3. During fermentation, changes in the levels of soluble solids, alcohol, total acid, and yeast viable counts were investigated. Alcohol content reached maximal levels after 9 days of fermentation, and was 12.6% (v/v) when the Fermivin strain was used and 13% (v/v) when each of the OC2 and W-3 strains was used. No significant between-strain difference was found, except for slightly slower alcohol production and sugar consumption, and a higher total acid content when strain OC2 was used. Changes in the yeast viable counts were similar during fermentation. The physicochemical characteristics of Campbell Early wine prepared using freeze-concentrated juice were investigated by measuring the levels of total phenolic compounds, organic acids, acetaldehyde, and minor alcohols and assessment of color values. Similar levels of soluble solids and total phenolic contents were observed in wines fermented by the three different strains, but a higher level of total acid was noted in OC2-fermented wine and a lower level of alcohol in Fermivin-fermented wine. The highest level of malic acid and the lowest level of lactic acid were detected in Fermivin-fermented wine. Although the wines showed variable levels of acetaldehyde and minor alcohols, the concentrations of these materials were much lower than those mandated by legal regulations promulgated by the Korean National Tax Service. Red and violet colors in OC2-fermented wine were darker than those of W-3-fermented wine. In sensory evaluation, W-3-fermented wine obtained the highest scores for color and flavor. However, the best taste score was reported for the OC2-fermented wine, whereas Fermivin-fermented wine was awarded the highest score in overall acceptance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.1-9
• /
• 2020

The manufacturing processes of high-precision parts for PGM (Precision Guided Missiles) have not been improved for decades; they still depend on machining or high-precision casting. These processes have an advantage when making small amounts of high-reliability parts in the usual case of a PGM system. In the case of a PGM system, however, which has been made for striking an extensive area, requires hundreds of bomblet units that require mass productivity. In addition, in the case of a part that is very difficult to machine, mass productivity and quality cannot be satisfied at the same time. In particular, cost reduction is an essential precondition to strengthening the export competitiveness of Korean defense articles. This study examined whether the MIM process is appropriate for manufacturing high-precision parts that require mass productivity. The optimized MIM process condition was determined after carrying out fundamental research. Comparisons of the quality of prototype parts with original parts and a functional test of a fuse that had been made with MIM parts highlighted the application possibility of the MIM process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.366-376
• /
• 2017

This study attempts to analyze the structure of the knowledge and duties of the vocational counseling service industry by using the text mining method and network analysis, which are methods of big data analysis. The subjects of the survey were vocational counseling, job placement and career change support, three fields in the unit elements of competence included in the National Competency Standards (NCS) which areproposed by the government. Although the analysis results of frequently used words showed that all three fields had independent duties, many were overlapping, such as counseling, examination, employment support, etc. for clients, job seekers, and others. The knowledge required by the employees of this field includes many new fields, such as start-up development, lifelong career consulting, job adaptation and culture conflict, besides the five subjects of vocational psychology, vocational counseling, labor market, job information, and law, which are included in the vocational counselor certification examination. Also, we suggested that the consultants adhere to emotional approaches, such as empathy, acceptance and attentiveness, and take a neutral stance. This study isvaluable in that it is the first attempt to objectively analyze the duties of the vocational counseling service field by big data analysis. In addition, it is also meaningful that we first confirmed the difference between the direction of government policy and the actual practice in the field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4826-4832
• /
• 2010

The study has been done for about two months through June 2 to July 30 of 2010. The study subjects are three herbal-pharmaceutical companies located in Seoul. Each of them purchased thirteen types of medicinal herbs, then the study did analysis for microbial contamination status of bacteria and fungi. Here, the study focuses on settling out fundamental data bases regarding the investigation standards of microbial contamination. As comparing the study results with contamination limits of bacteria and fungi which are represented by $10^7$ CFU/g and $10^4$ CFU/g in number respectively, the total percentage of fungi contamination which is 12.8% is higher than that of bacteria is only 7.7%. In the DNA homology analysis regarding 16S rRNA gene, 117 of colonization have been selected as study subjects. Including B. cereus composing of resistant spores, soil microbes account for approximately 96.6%. It indicates that it is important to establish collection and preservation systems in handling medicinal herbs. Also, it is critical to manage microbial contamination limits. In conclusion, the study proposes the needs to study on possible mingling of bacteria and fungi in manufacturing process, and microbial contamination status in medicinal herbs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.171-180
• /
• 2017

The purpose of this study is to determine an effective training method to improve sequela, since traumatic brain injury sequela is a major factor in determining the quality of life. Neurofeedback training was conducted for an adolescent who had experienced traumatic brain injury during his childhood and who had difficulty in cognitive learning and emotional aspects. The assessment of an adolescent was conducted using K-WAIS-IV intelligence test and QEEG brain wave analysis. In the neurofeedback training, T3 alpha wave compensation and T4 alpha wave inhibition training were performed 36 times for 30 minutes three times a week. In addition to the neurofeedback training, respiratory meditation was also made available to the adolescent. As a result, the adolescent showed a stable condition as indicated by taking a good sleep, reducing test anxiety, and satisfaction with final exam results. This study revealed the possibility for hidden physical and psychological problems arising due to childhood brain trauma. It has also recently been discovered that a more diverse set of tools can be found. In addition, these childhood traumatic brain injuries can be improved through brain training and meditation. The study finding is meaningful for its suggestion of a fusion method for developing mind and body therapy in terms of brain science.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.205-212
• /
• 2020

In the performance of a wind turbine system, the blades play a vital role. However, they are susceptible to damage arising from complex and irregular loading (which may even cause catastrophic collapse), and they are expensive to maintain. Therefore, it is very important both to find defects after blade manufacturing is completed and to find damage after the blade is used for a certain period of time. This study provides a new perspective for the detection of internal defects in glass-fiber- and carbon-fiber-reinforced panels, which are used as the main materials in wind turbine blades. A gap or fracture between fiber-reinforced materials, which may occur during blade manufacturing or operation, is simulated by drilling a hole 5 mm in diameter in the middle layer of the laminated material. Then, a digital-image-correlation (DIC) method is used to detect internal defects in the blade. Tensile load is applied to the fabricated specimen using a tensile tester, and the generated changes are recorded and analyzed with the DIC system. In the glass-fiber-reinforced laminated specimen, internal defects were detected from a strain value of 5% until the end of the experiment, while in the case of the carbon-fiber-reinforced laminated specimen, internal defects were detected from 1% onward. It was proved using the DIC system that the defect was detected as a certain level of strain difference developed around the internal defects, according to the material properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.251-261
• /
• 2016

Recently, many weapon related quality issues have arisen in the armed forces, such as failures of K-21 Infantry Fighting Vehicles, K-9 self-propelled mounts, and grenade explosion during boot training. Since all of the issues are repetitive phenomena, we examined the defense quality management system and identified the possible solutions for it. Since the government quality assurance agency performs their quality assurance activity using the system evaluation technique, we first reviewed the regulations related to the defense quality management system. Then, we benchmarked some other advanced quality management systems. We suggested two types of defense quality management system, one for small (in terms of the amount of the contract) competitive contracts and the other for large private contracts. For the first one, we adopted the framework of MIL-I-45208 (Inspection System Requirement), while for the second one, we adopted the framework of NATO AQAP 2310 (Quality Management System Requirements for Aviation, Space and Defense Suppliers).