• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.135-144
• /
• 2005

The Effects of intake swirl and combustion parameters on the performance and emission characteristics in a V8 type turbocharged intercooler D.I. diesel engine of the displacement $16.7\iota$ were studied experimentally in this paper. Generally the swirl in the combustion process of diesel engine promotes mixing of the injection fuel and the intake air. Also, TCI diesel engine is put to practically use intercooler in order to increase boost efficiency which is cooled boost air. As a result of steady flow test, when the swirl ratio is increased, the mean flow coefficient is decreased, whereas the Gulf factor is increased. And through engine test, its can be effected to meet performance and emission by optimizing the main parameters; the swirl ratio is 2.25, compression ratio is 17.5, combustion bowl is re-entrant $8.5^{\circ}$, nozzle hole diameter is $\phi0.33^{\ast}3+\phi0.35^{\ast}2$, injection timing is BTDC $12^{\circ}CA$ and turbocharger is T02 model which are compressor 0.6A/R+46trim and turbine 1.0A/R+57trim.

• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1185-1194
• /
• 2000

The characteristics of intake port flow and engine performance with swirl ratio variance in a turbocharged D.I. diesel engine were studied in this paper. The intake port flow is important factor which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to satisfy performance and emission by optimizing the main parameters; the swirl ratio of intake port, injection timing and compression ratio. The swirl ratio for ports was modified by hand-working and measured by impulse swirl meter. For the effects on performance and emission, the brake torque and brake specific fuel consumption were measured by engine dynamometer, NOx and smoke were measured by gas analyzer and smoke meter. The results of steady flow test are as follows; as the valve eccentricity ratio are closed to cylinder wall, the flow coefficient and swirl intensity are increased. Also we realized that there is a trade-off that the increase of swirl ratio decreases mean flow coefficient and increases the Gulf factor. And the optimum parameters to meet performance and emission through engine test are as follows; the swirl ratio 2.43, injection timing BTDC 13oCA and compression ratio 15.5.

• 에너지공학
• /
• 제11권2호
• /
• pp.90-98
• /
• 2002

본 연구는 선회유동과 연소인자가 9.4L인 터보과급 디젤엔진의 성능과 배기가스특성에 미치는 영향을 실험적으로 고찰하였다. 일반적으로 디젤엔진의 연소과정에서 선회유동은 분사되고 있는 연료와 흡칩공기의 혼합을 촉진시켜 줌으로써 엔진성능을 향상시키는데 매우 중요한 인자가 된다. 특히 터보과급 디젤엔진에서는 실린더내의 고온.고압가스로 인하여 연비와 NO$_{x}$ 농도는 서로 상반관계를 가지므로 적절한 용량의 과급기선정으로 흡.배기시스템, 분사시스템 및 연소실의 설계 등을 고려할 필요가 있다. 본 연구의 결과로서, 정상유동실험을 통하여 선회비가 증가함으로써 평균유량계수가 감소하고, 반면에 걸프 펙터가 증가함을 알 수 있었다. 또한 엔진실험을 통하여 흡기포트의 선회비 2.43, 분사시기 BTDC 13$^{\circ}$ CA, 압축비 16, 리앤트란트 5$^{\circ}$형 연소실, 노즐분공경 $\Phi$0.28*6 및 과급기 GT40(압축기 A/R 0.58, 터빈 A/R 1.19)의 적용인자가 최적의 성능 및 배기가스를 만족시킬 수 있었다.