• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.41-49
• /
• 2014

In this study, experimental research was carried out to evaluate the structural performance of the reinforced concrete beam using hybrid retrofitting with two materials (groove and embedding FRP rod, CFRP sheet) in existing reinforced concrete buildings. Seven reinforced concrete beams, retrofitted groove and embedding FRP rod (NER series) and groove and embedding FRP rod with CFRP sheet (NERL series), and standard specimen (NBS) were constructed and tested under monotonic loading. Design parameters of test specimens are the amount of groove and embedding FRP rod and lapping CFRP sheet. Test results showed that the maximum load carrying capacity of specimens with groove and embedding FRP rod and groove and embedding FRP rod with CFRP sheet (NERL series) were increased the by 12~46% and 22~77% respectively in comparison with the standard specimen NBS. Test specimens NER series were failed with the adhesion slip and concrete cover separation. And test specimens NERL series were failed with the adhesion slip due to the confining effect of lapping CFRP sheet.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.4
• /
• pp.100-108
• /
• 2010

With the rapid economic growth and improvement of living conditions in Korea, rebuilding and redevelopment of existing houses has also been rapidly increasing. As a result, considerable construction and demolition wastes have been produced. Demolition wastes, however, must be given special attention because of the various harmful substances in them. The construction waste has been produced most at demolition phase, but the research into that area has not being to make nearly within the country. The aim of this study was to evaluate and compare the contamination figures of the heavy metals and toxin organic substances in the soil and water caused by flying ashes generated and eventually accumulated in building demolition works. AB a result. most of the pollution levels were not worrisome, but some were increased after the demolition with the water used to prevent the dusty air and in the target buildings. However in the vicinity of the demolition sites with explosives there was no report of study in water and soil pollutions, so to minimize pollutions we need to make plans to select the harmful substance in the first place. Thus, this research is expected to be the important materials for future research into the construction waste area.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.255-269
• /
• 2017

Five year term monitoring investigating variation of allochthonous originated gravels are has been conducted in the beach gravel deposit of the Island Dokdo natural reserve which takes purity and uniqueness with enormous attention though a number of areas. The beach gravel deposits near the dock of the Dongdo and near the accommodation facility of the Seodo comprise various types of gravels including basalt, trachyte, and tuff from the Dokdo itself, and granite, rhyolite, gneiss, quartzite, marble, and concrete from elsewhere. The types of the allochthonous gravels on the basis of the study in 2011 and in 2016 shows no difference, so is the ranking of abundance of the allochthonous gravels; granite-concrete-gneiss in turn on the Dongdo, concrete-gneiss-granite in turn on the Seodo. Nevertheless, the relative ratio of the allochthonous gravel area against the total area is decreased. While it is suspected that the disintegrated facility and the influx of material for construction are the main 2 reasons for the contamination by allochthonous gravel, diminished total contamination ratio indicate that supervising allochthonous material has been improved; at least not worse during the 5 years. On the other hand, it is inferred that gradual influence of rockfall also has been made the gravel beach changed. Therefore, consistent rockfall investigation must be inquired.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.1-15
• /
• 2017

This study investigated the process of change of 32 urban parks designated during the period of Japanese colonial rule according to growth and development of the city in Busan. Particularly, researching included analyizing books, notification, data, and documents relevant to the history of urban planning published by Busan city. As a result, Daejeong Park, Gokwan Park, and Yongdusan Park had been utilized by Japanese residents under the Japanese colonial rule before planning of urban parks, and 32 parks legally specified in 1944 were planned by considering the prevention against disasters. After emancipation, there were an unauthorized building, housing construction, business district, public office, and school facility in the sites of the parks due to the influence of the Korean War and reorganization of urban planning. The majority of parkways and small parks downtown were eliminated. However, unexecuted parks that the government had designed on the edge of town during the Japanese colonial period have become major parks downtown through the city's growth. Yeonji Park, Yangjeong Park, and Danggok Park have been being building as a business of parks for a comfortable city, forming downtown along with the Green-Busan Policy. Thus, 32 parks designated under the Japanese colonial rule have made or got out of use reflecting on the phases of the times of modern Korean society. It turns out that these parks need an investigation about condition for land possession and purchase of the site of the parks in order for social common capital.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.1
• /
• pp.5-27
• /
• 2020

Many local governments in Korea have competitively shown great interests in establishing and operating public libraries and carried out various projects. With this, an increasing number of local governments have recently established and implemented medium- and long-term development plans for their public libraries, based mostly on the findings from researches committed to the outside experts. Cheongju City has formulated the First Medium- and Long-Term Development Plan for Public Libraries in Cheongju City (2012-2016) in 2011 and the Second Plan (2017-2021) in 2016. The goal of this study is to help accomplish the planned goals of the Second Plan by conducting an interim check on the current state of execution and content of the Second Plan. To reach the research goals, first, we identified the outcome and limitations of the First Plan, as previously carried out. Second, we analyzed the trend in the change of the cultural environments of public libraries in Cheongju City. Third and lastly, we reviewed the promotion strategy and operation outcome of the Second Plan. In particular, this study focused on the expansion of an organizational structure, the reinforcement of professional workforce, and the increase in budgetary support as the core elements required for developing public libraries in Cheongju City.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.155-162
• /
• 2019

In Korea, the relevant laws and regulations for fire safety in buildings have been revised. Since 2011, Performance-based Design has been conducted for large-scale or high-rise buildings. However, the Korea's performance-based design is still at a level where life safety evaluation using fire and evacuation simulation tools is compared with existing methods. Although related studies have been conducted continuously for the mandatory performance-based design, the fact that it is relatively unsatisfactory for design and construction of fire-fighting facilities as it mainly focuses on administrative and institutional improvement measures or computer simulation. This study collected 91 performance-based design documents that were carried out nationwide at the initial stage of implementation until 2016 to analyze the status of performance-based design of fire-fighting facilities. As a result, fire-fighting facilities, except for fire extinguish system facilities, were not properly designed for performance. Furthermore, the designers found that if corresponding facilities or higher-level equipment with upgraded performance is additionally installed, the performance-based design fared well compared to the existing the prescriptive-based design.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.55-64
• /
• 2013

The complexity of constructing medical institutions is higher than that of general buildings, and many change orders in the design and defect repairs in the construction phase are required due to strict government regulations. The priority control of constructions and impact factors of medical institutions were analyzed in this study, and difficulties in the control in the design and construction phase were identified. First, the priority management factors that were identified were as follows: architecture, facilities, and electricity. Second, 1) priority management in constructions and factors resulting in change orders and 2) priority management in constructions involving defect repair were analyzed. Third, the importance recognized by the construction managers were analyzed. The priority management in constructions and factors that were recognized by the construction manager were deducted as having low importance, although there were many change orders and defects. The work of finishing, wall building, joining, office automation and communication function, and lighting were analyzed in the design phase, and waste, the office automation and communication function, ceilings, contamination control, and plumbing were analyzed in the construction phase. The results showed that there will be a decrease in change orders and defects if the concentration of the manager was elevated and priorities were managed.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.122-130
• /
• 2018

As smart tourism is gaining more attention, there are increasing attempts to make use of augmented reality(AR) in tourism industry. However, existing AR-based tourism contents are only limited to the 'designated' cultural heritage, overlooking the value of undesignated cultural heritage lost in the past few decades of development era. This hinders expanding the scope of tourism contents and leads to the production of banal and similar contents. Given that, our study has developed tourism contents based on , an AR-based mobile application that enables participants to virtually visit the historical sites lost in the development era. The Chungmuro area, which the app is named after, is unique in character. The area has been famous for movie making for over 30 years until the '90s. It is abundant with movie-related cultural resources such as theaters and print shops, which makes the place where people wants to feel the glorious past. Through the app, participants are able to walk along the historic trail and take pictures at five virtual historic spots, among many others. We also examined participants' level of satisfaction and overall tourism experience. By taking the result into account, we hope that the AR-based tourism contents will increase in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.60-71
• /
• 2014

Cable-stayed bridge, which is one of the representative long-spanned bridge, needs prompt maintenances when a stay cable is damaged because it may cause structural failure of the entire bridge. Many researches are being conducted to develop abnormal behavior detection algorithms for the purpose of shortening the reaction time after the occurrence of structural damage. To improve the accuracy of the damage detection algorithm, ample observation data from various kinds of damage responses is needed. However, it is difficult to measure an abnormal response by damaging an existing bridge, numerical simulation can be an effective alternative. In most previous studies, which simulate the damage responses of a cable-stayed bridge, the damages has been considered as a load variation without regard to its stiffness variation. The analyses of using these simplification could not calculate exact responses of damaged structure, though it may reserve a sufficient accuracy for the purpose of bridge design. This study suggests Gradual Bilinear Method (GBM) which simulate the damage responses of cable-stayed bridge considering the stiffness and mass variation, and develops an analysis program. The developed program is verified from the responses of a simple model. The responses of a existing cable-stayed bridge model are analyzed with respect to the fracture delay time and damage ratio. The results of this study can be used to develop and verify the highly accurate abnormal behavior detection algorithm for safety management of architecture/large structures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.123-129
• /
• 2018

Ink-jet printing technology with ceramic ink of the four digital primary colors (cyan, magenta, yellow, and black; CMYK) can provide stable coloration even in the high-temperature firing process. Ceramic ink-jet printing can be widely applied in construction and ceramic industries due to the advantages of accurate and fast printing process of digital images for various products. Generally, organic solvent with proper viscosity and surface tension has been used in digital ink-jet printing process. However, the needs of ceramic ink without VOCs emission is increasing. In the present study, eco-friendly ceramic ink was synthesized by combining alumino boro-silicate glass frit and $CoAl_2O_4$ inorganic pigment based on an aqueous solvent that does not generate VOCs. The rheological properties and dispersion stability of aqueous ceramic ink were optimized. Jetting behavior and printing characteristics of the ceramic ink were also investigated in detail. As a result, the formulated aqueous ceramic complex ink showed a suitable jetting behavior without satellite drop by adjusting viscosity and surface tension. The ceramic ink can be printed on glass substrate with minimized spreading phenomena duo to high contact angle.