• Journal of the KSME
• /
• v.35 no.1
• /
• pp.26-35
• /
• 1995

직물은 경사와 위사가 직각으로 교차하여 만들어진 것으로 여기에 사용하는 경사와 위사를 준 비하는 것을 제직 준비라 한다. 사이징(sizing)은 원사에 풀을 먹이는 제직 준비 공정의 한 가 지로서 제직시에 발생하는 마찰, 긴자으로부터 사(사)를 보호하여 제직 효율을 향상시키는 데 목적이 있다. 이러한 작업에서 호재가 균일하게 접착되고 양호한 품질로 대량생산을하여 경제 적인 합리화를 이루기 위하여 기계 사이징을 한다. 그림 1은 일반적인 합성 섬유용 사이징기의 구조이다. 호재는 용액상태로 준비되며, 원사는 호재용액을 가로질러 이동하여 연결되는 다음 공정에서 용이하게 취급되도록 건조되어 권추된다. 표면에 점성이 높은 호재가 부착된 원사를 단시간에 효과적으로 건조시키는 것이 사이징기 건조부의 역할이며, 가공되는 원사의 종류가 다양해짐에 따라 각 원사의 특성에 적합한 건조방법이 발전되어 왔다. 이 글에서는 건조시스템의 이론적인 고찰과 신합섬용 사이징기 SUPER-500에 대한 건조 시스템의 구조 및 동작 원리를 소개하고 향후 발전 방향을 제시코자 한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.106-111
• /
• 2003

농산물을 건조하는 이유는 생산 후 유통과정과 저장 중에 품질의 변화와 손상을 방지하고 가공성을 향상시키기 위한 것으로서 현재 농가 및 일반 농산물 가공 공장에서는 화석연료나 전기를 이용한 열풍건조기가 많이 사용되고 있다. 표고버섯은 농가의 고소득 특용작물로 단백질, 당, 무기질 및 각종 아미노산과 비타민 등을 고루 갖춘 식품으로서 최근에는 항산화, 항균 및 항암 효과에 대해서도 알려져 있고, 매년 생산량과 소비량이 증가하고 있다(고 등 1999). (중략)

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.884-892
• /
• 2014

The purpose of this study was to investigate the drying characteristics and drying models of Ainsliaea acerifolia Sch. Bip. using far-infrared thin layer drying. Far-infrared thin layer drying test on Ainsliaea acerifolia Sch. Bip. was conducted at two air velocities of 0.6 and 0.8 m/sec, as well as three drying temperatures of 40, 45, and $50^{\circ}C$ respectively. The drying models were estimated using coefficient of determination and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, leaf color changes, antioxidant activity, and contents of polyphenolics and flavonoids. The results revealed that increases in drying temperature and air velocity caused a reduction in drying time. The Thompson model was considered suitable for thin layer drying using far-infrared radiation for Ainsliaea accerifolia Sch. Bip. Greenness and yellowness values decreased and lightness values increased after far-infrared thin layer drying, and the color difference (${\Delta}E$) values at $40^{\circ}C$ were higher than those at $45^{\circ}C$ and $50^{\circ}C$. The antioxidant properties of Ainsliaea acerifolia Sch. Bip. decreased under all far-infrared thin layer drying conditions, and the highest polyphenolic content (37.9 mg/g), flavonoid content (22.7 mg/g), DPPH radical scavenging activity (32.5), and ABTS radical scavenging activity (31.1) were observed at a drying temperature of $40^{\circ}C$ with an air velocity of 0.8 m/sec.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.84-91
• /
• 2003

The effects of different dehydration conditions for the removal of ginkgo nut inner coat on peeled ginkgo nuts were examined using physical and sensory methods. Dehydration of ginkgo nuts at $90^{\circ}C$ for 120 min resulted in greater hardness, lightness (L), redness (a), yellowness (b), and firmness. Higher roasted flavor and larger holes were observed with dehydration at $150^{\circ}C$ for 30 min and greater cooked ginkgo flavor and green color with dehydration at $120^{\circ}C$ for 50 min. Based on these findings, dehydration at $120^{\circ}C$ for 50 min was determined as the adequate hot air dehydration condition for the removal of ginkgo nut inner coat. Ginkgo nuts stored at $25^{\circ}C$ maintained overall desirability up to 4 weeks. In ginkgo nuts stored at $4^{\circ}C$, all sensory desirabilities evaluated were reasonably high until 60 days of storage; desirability of appearance decreased moderately at 80 days of storage, and appearance became very undesirable at 180 days. Ginkgo nuts stored at $-18^{\circ}C$ showed little changes until 10 months of storage, but slight decreases in overall desirability, flavor, and texture were noted at 12 months.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.111-115
• /
• 2009

This study was conducted to develop the ultrasonic dryer because present drying methods (heat convection, microwave, vacuum, etc.) could not improve the drying consumption energy, decrease of quality and drying ratio by physical limitation. The drying tests were conducted with four levels (No. 1 only non-heated air, No. 2 only ultrasonic, No. 3 only heated air and No. 4 ultrasonic with heated air) and measuring weight of samples after drying carrot and ginseng slices for 30 minutes. The result of test is that the drying ratio was highest in the level of No. 4 ultrasonic with heated air. The sliced carrot's drying ratio was 22.4% (w.b.)/h and sliced ginseng's drying ratio was 3.8% (w.b.)/h. The discoloration and twist of samples was appeared on using only heated air like No. 3.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.108-114
• /
• 2002

Red pine(Pinus densiflora) square timbers with 14.0 cm and 16.5 cm of face size and 24 m long were dried in a vacuum-press kiln and in a radio-frequency/vacuum(RF/V) kiln to compare drying rate, moisture content(MC) distribution and specific energy. RF/V drying rate was higher than vacuum-press drying rate. The effect of size of cross section on the RF/V drying rates were more pronounced than those of vacuum-press drying. The longitudinal- and the transverse MC distribution of dried square timber showed convex profile for the vacuum-press drying and concave profile for the RF/V drying. Moisture gradient of width direction was similar to the thickness direction in vacuum-press dried square timber and was more slight than that of the thickness direction in the RF/V dried large square timber. The specific energy consumption curve increased as MC decreased. Specific energy(kWh/kg of water evaporated) of the vacuum-press process required more than that of the RF/V process.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.258-261
• /
• 1991

In order to establish the optimum drying temperature of the heated air blast-grain circulation dryer, a 2 ton scale of paddy was used in this experiment. The temperatures of heated air used were 45, 50, 55, 60, 65 and $70^{\circ}C$. Moisture content of the paddy was reduced to 15% from 24% by drying. The higher air temperature, the shorter drying time and the less fuel consumed. The portion of cracked kernels was found to be low as $3{\sim}10%\;at\;40{\sim}55^{\circ}C$, but was very high to $28{\sim}30%\;at\;60{\sim}70^{\circ}C$. The germination percent was very high as 98 and 93% at 40 and $45^{\circ}C$, but it was decreased to 86 and 30% at 50 and $70^{\circ}C$, respectively. The recovery yield of milled rice from paddy was decreased by 1.76, 2.63 and 7.52% at 60, 65 and $70^{\circ}C$, respectively, compared with 75.86% as drying at $40^{\circ}C$. The higher heated air temperature, the less head rice of milled rice was recovered, and the decreased ratio was increased $60^{\circ}C$. The higher heated air temperature, the less alkali disintergation value and gel consistency of milled rice and the more water up take, expanded vlume, total solid in residual liquid and intensity of starch iodine blue value of residual liquid, and those tendency was found clear from $60^{\circ}C$ temperature of heated air.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1314-1320
• /
• 2011

Vacuum drying was conducted for a steamed pumpkin-sweet potato slab to improve its quality, convenience and preference as snack. Steamed sweet potato was dried from 30 to $60^{\circ}C$ for 12 hr, after which moisture contents, colors, and taste were evaluated. The lowest moisture content was 0.22% upon vacuum drying at $60^{\circ}C$ for 12 hr. Lightness decreased while other color values (a, b and ${\Delta}E$) increased with increasing drying temperature and drying time. Reducing sugar and soluble solid contents ranged from 98.7~268.11 mg/g and $19{\sim}72^{\circ}Brix$, respectively. Sensory score of the sample was the highest when dried at $50^{\circ}C$ for 6 hr. The optimum drying conditions were predicted to be $48.5{\sim}62^{\circ}C$ and 5.1~7.1 hr by response surface methodology.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.188-196
• /
• 2006

Changes in physicochemical characteristics and functional components content of saengsik, uncooked food, were investigated to find efficient drying methods, one of important manufacturing process of saengsik. No changes in proximate compositions of all samples were observed during hot-air drying at 50, 55, and $60^{\circ}C$ and freeze-drying. Colors of carrot, Lentinus edodes, and sea mustard did not change, while a value of cabbage, L, a, and b values of Agaricus bisporos, and a value of laver changed slightly by hot-air drying at all temperatures and freeze-drying. Dietary fiber content increased by hot-air drying but not by freeze-drying. Reductions in vitamin C and ${\beta}-carotene$ contents of carrot, cabbage, sea mustard, and laver were higher by hot-air drying than by freeze-drying. Contents of total phenolics and lectin of L. edodes and A. bisporos were not affected by hot-air drying and freeze-drying. Contents of pectin, alginic acid, and porphyran in sea mustard and laver increased by hot-air drying.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.310-316
• /
• 2010

The objective of this study was to determine the optimum manufacturing conditions of whole egg powder with high foaming property sufficient for making sponge cakes. Whole eggs were either desugarized and/or adjusted pH before spray-dried at a temperature of $70^{\circ}C$. The physical properties of the cake were measured, and sensory evaluation was conducted on a 9-point scale. The pH and specific gravities of the foam and batter made from desugarized egg powder did not differ from those of the control, whereas batter made from commercial powder experienced significant loss of cake characteristics. The pH adjustment did not improve the foaming properties of the egg powders. The volume and textural properties of the cakes made from spray-dried egg did not differ from those of fresh egg. The taste and sensory characteristic scores for fresh egg, desugarized whole egg powder, and commercial powder were 5.00, 4.78, and 1.89, respectively. These results indicate that egg powders desugarized and spray-dried at $70^{\circ}C$ are sufficient for making sponge cakes with acceptable physical and sensory attributes.