• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.577-583
• /
• 1998

Chestnut and paulownia boards for the traditional musical instruments were air dried to compare moisture contents(MC), drying rates and drying times between the air drying for 70 days in a yard and the shed drying for 150 days in a closed shed when piled in early June. An average final MC and the drying rate of chestnut boards were 20.6 percent and 0.78%/day for the air drying, and 16.6 percent and 0.44%/day for the shed drying. An average final MC and the drying rate of paulownia boards were 16.7 percent and 1.53%/day for the air drying, and 13.5 percent and 0.77%/day for the shed drying. Drying rates of air-dried boards were nearly twice as high as those of shed-dried boards for both species. Air drying rates of chestnut and paulownia boards were very high and exhibited falling drying rate above the fiber saturation point(30%), and then decreased irregularly. However, shed drying rates of chestnut and paulownia boards were high and exhibited falling drying rate above 55 percent MC for chestnut boards and above 80 percent MC for paulownia boards, and then decreased irregularly.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.4
• /
• pp.355-369
• /
• 1991

미세수술을 이용한 재건외과 분야에서 빈번히 혈관이식이 요구된다. 이러한 경우 자가정맥이 가장 널리 사용되고 있으며 그의 신뢰성도 인정되어 있다. 그러나 정맥 채취에 따르는 부가적인 수술이 요구되며 혈관 공여부에 또다른 결손을 초래한다. 동결건조동종정맥은 이러한 점을 보완하고 자가정맥을 대체할 수 있는 잠재성이 있다. 이에 동결건조동종정맥의 효율성을 알아보고자 2.5cm 길이의 가토대퇴정맥을 $-65^{\circ}C$, 200 mtorr의 음압으로 동결건조시킨 다음 대퇴동맥 결손부에 동종이식하고(n=24), 신선한 가토대퇴정맥 동종이식군(n=24)과 자가정맥이식군(n=24)을 1주 간격으로 4주간 비교 관찰하였다. 2주 개존율은 동결건조동종정맥 이식군, 100%;동종정맥이식군, 50%; 자가정맥이식군, 100%이었으며 4주 개존율은 동결건조동종정맥이식군, 83.3%;동종정맥이식군, 50%;자가정맥이식군, 100%로서 동결건조처치만으로 동종정맥이식의 생존율을 증가시켰다. 미세임파구세포독성검사에서는 동결건조정맥의 항원성이 상당히 낮아져있음을 알 수 있었다. 그러나 동결건조정맥의 내막세포화가 주사전자현미경 및 광학현미경 소견상 자가정맥보다 지연됨이 관찰되었다. 이러한 결과를 종합해 볼 때 동결건조동종정맥은 아무런 처치를 하지않은 신선 동종정맥보다 현저한 장점이 있었지만, 자가정맥이식을 대신할 수 있는 보다 더 좋은 대체방법이라는 견지에서는 임상 적용이 어려울 것으로 사료되었다.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.54-60
• /
• 2015

The objective of this study is to develop a belt-type dryer with a capacity of 1 ton/day, thereby improving drying efficiency by more than 70% and reducing the size of dryers by more than 50%, and thus making dryers smaller and lighter to reduce the installation and operation costs by more than 20%. We identified structural improvements by analyzing existing dryers employing indirect heating and verified the superior drying performance of the proposed method through some basic experiments. Furthermore, we verified the improvements in the heat transfer and drying characteristics as we conducted the experiments at reduced pressure.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.261-266
• /
• 1984

Soymilk residue was washed separately with acetone, ethanol, isopropyl alcohol and n-hexane, and then dried at $45^{\circ}C$. The dried residues were evaluated for drying rate, color and chemical and functional properties. Washing with acetone resulted in the shortest drying time (1hr) and the highest in protein content (48.8%) and in Hunter 'L' value. The dried residues after treatment with acetone and alcohols showed relatively high values of 4.3-4.7g/g and 8.5-8.7g/g in oil and water absorption, respectively. Addition of the acetone treated residue to wheat flour at a level of 10% affected little in Amylograph viscosity while those treated with other solvents caused a significant decrease in the viscosity.

• Water for future
• /
• v.21 no.2
• /
• pp.193-201
• /
• 1988

A simplified model for higher order scanning curves in the soil water characteristic function is suggested. The conceptual hysteresis models developed by $Mualem_{8,9}$ are simplied for higher order scanning curves. Higher order drying curves are regarded as primary drying curves and the last wetting reversal point is assumed to be on the main wetting curve by moving that point vertically downward. For the higher order wetting curves, it is assumed that these curves can be regarded as primary curves and the last wetting reversal point sits on the imaginary main drying curve which passes through the last wetting reversal point. The water content computed from the simplified model are compared with those obtained from Mualem's original model for second order scanning curves. It is found that absolute differences between the two methods aree relatively small and the simplified model always underestimates for higher order drying curves while it overestimates for higher order wetting curves. Hence, those two tend to compensate each other for repeated drying-wetting processes. The simplified model approximates higher order scanning curves well and reduces computation considerably.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.655-661
• /
• 1989

Optimal drying conditions consisting of air temperature and relative humidity were searched by the simulation-optimization technique for minimizing quality changes in red pepper drying. Optimized drying conditions were analysed in the viewpoint of quality change kinetics and effects of control variables on the state variables. Optimal drying conditions were nearly same in both cases for carotenoid maximization and browning minimization. In two staged optimized drying, relative humidity took a lower search limit of about 10%, and air temperature in the first stage was near the lower limit of $50^{\circ}C$ and in second stage increased to a higher temperature varying with total drying time and stage changing time. Response surface analysis of time invariable drying confirmed the location of the optimal point lying on the vertex of lower limit humidity and a lowest drying temperature which ensures to attain target moisture of 0.2g water/g dry solid. Two stage drying can attain the higher objective function of quality by 3-5% than time invariable drying for shorter total drying times.

• Composites Research
• /
• v.13 no.3
• /
• pp.48-57
• /
• 2000

Fracture analysis of coating cracking on a substrate system described in a companion paper was applied and verified by four-point bending tests. The multiple cracking of coating was predicted using a fracture mechanics approach. The strain energy release rate (G) due to the formation of a new crack in a coating was obtained. A crack density vs. strain data of metallic and polymeric substrate was used to get the in-situ fracture toughness of coating with respect to various baking time and temperature. The $G_c$ was decreased as the baking temperature and time was increased. This paper gave insight about usefulness of four-point bending test for fracture toughness evaluation of coating and it gave a new method for in-situ coating toughness.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.162.2-163
• /
• 2003

두부는 특유의 질감으로 우리 민족의 주요부식이 되어온 전통식품으로서 국제적으로 잘 알려져있는 고단백식품이다. 두부의 원료인 대두는 전체단백질의 80∼90%를 차지하는 glycinin과 albumin등의 단백질 성분과 비단백 질소 화합물이 함유되어 있는데 가격이 저렴하면서 영양과 기능성이 우수하여 식육, 낙농제품, 계란단백질이 disulfide 결합, 수소결합 및 소수결합에 의해 응집되어 gel이 된 후 염농도 증가에 의해 침전되거나 산에 의해 등전점 (pH 4.2∼4.6)에서 침전되는 성질을 이용한다. 또한 두부는 80% 이상의 높은 수분함량 때문에 쉽게 변질되는 소지가 많으며 두부의 저장에 많은 한계성을 보이는 식품이기도 한다. 따라서 건조에 의한 식품의 저장은 식품내의 수분을 감소시킴으로써 용질의 상대적 농도를 높혀 식품내의 수분 활성도를 저하시켜 미생물 및 효소에 의한 부패나 변패 및 변질을 방지할 수 있다. 이에 본 연구에서는 두부의 안전저장과 유통을 위하여 열풍건조, 진공건조 및 동결건조에 따라 분말두부를 제조하고 수분흡습특성과 기존 모델식과의 적합성 및 평형수분함량의 예측모델을 구하여 분말두부의 활용성을 높이며 다른 분말식품에도 적용할 수 있는 기초자료를 제공하고자 하였다.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.76-82
• /
• 2002

The rapid-set cement concrete causes high hydration temperature and nay result in a high drying shrinkage and shrinkage-induced cracking. This problem may be fixed by incorporating polypropylene fibers in rapid-set cement concrete, because of increased toughness, resistance to impact, corrosion, fatigue, and durability. A series of concrete drving shrinkage tests was peformed in order to investigate the shrinkage properties of polypropylene fiber reinforced concrete with experimental variables such as concrete types, fiber reinforcement, W/C ratio, with and without restraint. Uni-axially restrained bar specimens were used for the restrained shrinkage tests. The results were as follows; The dry shrinkage of rapid-set cement concrete was much lessor than that oi OPC, probably because of smaller weight reduction rate by early hydration and strength development. The constraint and bridging effects caused by polypropylene fibers were great for the rapid-setting cement concrete when compared with that of plain concrete, and this resulted In increased resistance against tensile stress and cracking.

• 보존과학연구
• /
• s.35
• /
• pp.45-55
• /
• 2014

The small dining tables which are made of bamboo were deteriorated condition when those were excavated from Mado shipwreck No.1. Therefore, preliminary test was conducted for consolidation (Sucrose, Dammar gum, Cetyl alcohol and Polyethylene glycol 4000) then impregnated and vacuum freeze dried. After the test, since the treatment with vacuum freeze drying using an aqueous solution of PEG 4000 keep the shape well the most and present bright colour, waterlogged archaeological bamboo conserved with vacuum freeze drying using an aqueous solution of PEG 4000. One bamboo table consolidated with soluble PEG 4000 from 10% to 40%, then vacuum freeze dried. Another impregnated with soluble PEG 4000 from 10% to 70%. After that, it was separated and held in polycarbonate sheet for preventing bending during dry. The small dining tables are the three dimensional shapes and have some loss. Therefore the mounting for support tables were necessary which are made of acrylic sheet. It keep the table shape and make it convenient for storage and handling.