• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.72-79
• /
• 2019

Concrete is vulnerable to cracks due to volume changes caused by temperature changes, shrinkage during curing, external forces, or poor construction. In particular, concrete placed in electric power tunnel structures can generate cracks by a variety of factors. As a result, these tunnel structures require continuous maintenance. In this study, we investigated the mechanical properties of electric power tunnel concrete using alpha-calcium sulfate hemihydrate, which is an industrial byproduct that has excellent expansion performance. To compensate for the decrease in compressive strength when substituting alpha-calcium sulfate hemihydrate, based on previous research, we added 9% alpha-calcium sulfate hemihydrate and adjusted the amount of admixture while using the same amount of cement. We then evaluated the mechanical properties of the concrete. The results showed that the compressive strength of the concrete was higher than that of ordinary Portland cement (OPC), and the shrinkage of concrete was reduced by more than 30% compared to that of OPC. Therefore, adding 9% of alpha-calcium sulfate hemihydrate is expected to have a significant effect in reducing concrete cracks.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.843-848
• /
• 2013

As the LNG demands are growing, the constructions of LNG FPSO (Floating Production Storage and Off-loading) and LNG carriers have been constantly increased, and the various design of storage tank has been tried. This paper propose that the material of inner storage tanks is made of 5~9% Ni steel plate and perlite powder insulation instead of urethane foam block. It needs essentially to obtain the proper design specifications that are the pressure of perlite, the characteristics of resilient blanket as the pressure absorber, optimum thickness of blanket and design pressure of tank wall, etc. to enable the perlite insulation system to LNG carrier, The results show that the design thickness of blanket should be between 1/4 to 1/3 of insulation width and the optimum rate becomes 30%, and the design pressure be applied below 1,500 Pa with blanket thickness.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.194-200
• /
• 2004

Porcine small intestine submucosa (SIS) has been widely used as a biomaterial without immunorejection responses. Crosslinked SIS sponges were characterized for the possibility of the bio-interactive wound dressings and tissue engineered scaffolds. SIS powders were dissolved in 3% acetic acid aqueous solution at 48hrs followed by pouring into mold and then fabricated by freeze-drying method. SIS sponge was prepared by crosslinked with 1-ethyl-(3-3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC) solution (deionized water: ethanol=5:95) with 1-100mM concentration for 24 hrs and Iyophilized. SIS sponges were characterized by scanning electron microscopy, differential scanning calorimeter, and Fourier transform infrared spectrometer and were tested their porosity and water absorption ability. It was observed that the concentration of EDC might be exceeded 50 mM to get good physical characteristics. In conclusion, it seems that SIS sponge could be very useful for the applications of wound healing and tissue construction.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.39-48
• /
• 1983

This research was performed to investigate the manufacturing possibility of the particleboard treated with commercial fire retardant chemicals. Laboratory test boards at this investigation were made from particles treated by soaking into 5, 10, 15, and 20 percent concentration solutions of ammonium sulfate and Minalith before resin was applied. According to the results, MOR (modulus of repture) and MOE (modulus of elasticity) in flexure exceeded type 100 (100 kgf/$cm^2$, $1.5{\times}10^4\;kgf/cm^2$) of the Korean Industrial Standard (KS F 3104). Except for 15 and 20 percent chemicals concentrations of Minalith, every internal bond stress values met type 100 (1.5 kgf/$cm^2$) of KS F 3104. However thickness swelling values of fire retardant treated particleboards were not reached in the Standard (12%).

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.38-52
• /
• 1997

Aluminum-faced honeycomb-cored sandwich panels as hull plating can provide structural weight savings when compared with the conventional aluminum single panels. The aim of the present paper is to confirm the feasibility of the sandwich panels for the hull material of fast ferries through designing an 80m class proto-type fast passenger/car ferry. For the case study, the structural design for the same principal particulars using the aluminum single panels is also performed, and the design results for the two types will be compared to confirm the weight savings between the two construction methods. The economics of a ship, being comprised of the shipbuilding cost and ship operaing cost, will require a cost analysis including a quantitative comparison between the two construction methods and the results of the cost analysis will be presented. Finally, the reasons why aluminum sandwich panels have not presently been used as the hull material for large size fast vessels will be discussed.

• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2001

The three medicinal herbs, Astragali Radix, Glycyrrhizae Radix and Aurantii nobilis Pericarpium, irradiated with γ-rays have been tested for their possible genotoxicity. The hot water extracts of the 10 kGy γ-ray irradiated herbs were examined in the Salmonella mutagenicity test(histidine reversion assay; Ames test) using Salmonella. typhimurium TA98 and TA100 as tester strains. No mutagenicity was detected in this assay both with and without metabolic activation. The safety of the herbs irradiated with γ-rays at tactical doses needs to be evaluated in further tests of genotoxicity in vivo and chronic and reproductive toxicity.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.360-364
• /
• 2003

This study was conducted to investigate the preparation possibility of Beni-koji by Monascus pilosus using dried soybean curd residue(Biji). The additional effect of water(0-50％), glucose(0-10％, w/w), monosodium glutamate(0-0.l％, w/w) and citrus peel water extracts (0-0.5％, v/w) on the pigment and monacolin K content of the Biji Beni-koji were examined. Optimal added amounts of water was 20％ of dried Biji. The highest pigment content(OD at 500 nm) of Biji Beni-koji was 1.06 in 10％ glucose, 2.26 in 0.01％ monosodium glutamate and 2.61 in 0.4％ citrus peel water extracts. The content of monacolin K in the Biji Beni-koji added with 10％ glucose, 0.01％ monosodium glutamate and 0.4％ citrus peel water extracts showed 96.38 mg％(w/w), 118.25 mg％(w/w) and 104.50 mg％(w/w), respectively.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.59-74
• /
• 1997

This paper presents the results of the geotechnical investigation and settlement analysis of a finished waste landfill to find the possibility of the site as a construction area. Also, the variations of the strength of the municipal waste after mixing with the several types of the particulate grouts are investigated. The materials of the grouts used in the experiment are Quick Lime, Portland Cement, Slag Cement and Geocrete Cement. The results of the geotechnical investigation show that the maximum dry unit weight of the waste becomes lower and optimum moisture content higher as the age of the disposed waste is younger and the organic content is higher. The thickness of the predicted differential settlements of the waste fill has large difference from location to location and the unconfined compression strength of the grout mixed waste from the experiment was higher in the order of Geocrete Cement, Slag Cement, Portland Cement and Quick Lime.

• Clean Technology
• /
• v.24 no.4
• /
• pp.357-364
• /
• 2018

Studies on the production of biogas from third generation biomass, such as micro- and macroalgae, have been conducted through experiments of various scales. In this paper, we investigated the feasibility of commercialization of integrated combined heat and power (CHP) production using biogas derived from macroalgae, i.e., seaweed biomass. For this purpose, an integrated CHP plant of industrial scale, consisting of solid oxide fuel cells, gas turbine and organic Rankine cycle, was designed and simulated using a commercial process simulator. The cost of each equipment in the plant was estimated through the calculated heat and mass balances from simulation and then the techno-economic analysis was performed. The designed integrated CHP process produces 68.4 MW of power using $36ton\;h^{-1}$ of biogas from $62.5ton\;h^{-1}$ (dry basis) of brown algae. Based on these results, various scenarios were evaluated economically and the levelized electricity cost (LEC) was calculated. When the lifetime of SOFC is 5 years and its stack price is $$225kW^{-1}$, the LEC was 12.26 ¢ $kWh^{-1}$, which is comparable to the conventional fixed power generation.

• Korean Journal of Agricultural Science
• /
• v.30 no.2
• /
• pp.128-138
• /
• 2003

The bacterial density of partially processed horticultural crops in the commercial market was relatively high probably due to improper handing or processing. Between crops, the bacterial density was low in peeled garlic and ranged above $10^8cfu{\cdot}g^{-1}fw$ in other crops. Especially in brake fern, the bacterial density was the highest and non food materials such as packing strips were found. There was difference in the effects of ozone-treated water washing treatment between crops. In root crops such as burdock and lotus root, ozone showed positive effect on preventing discoloration as well as lowing bacterial density resulting in the increase of marketing period. Any positive effect was not found when sliced crops were treated over 5 min at $0.3mg{\cdot}L^{-1}$ of dissolved ozone. In lettuce slices, leaf tissues were severely discolored and rapidly soften at $0.3mg{\cdot}L^{-1}$ for 2 min dipping. Ozone was highly effective on inhibiting bacterium propagation and off-flavor. This effect was more stronger in Fischer ligulariata than brake fern, probably due to the difference of tissue thickness. Results indicated that ozone-treated water washing had a strong potential to improve the market quality of partially processed horticultural crops including dried wild greens and sliced root crops.