• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.211-212
• /
• 2009

국내의 다이아몬드 마이크로 블레이드 산업의 경우 충분한 이론적 검증을 거치지 못하고 종전의 경험 및 외산품에 대한 분석을 토대로 제작된 제품에 간단한 물성만을 체크하여 업체에 공급한다 해도 과언이 아니다. 이러한 국내의 실정을 인지하여 본 연구에서는 Cu와 Sn을 주 결합재로 사용한 다이아몬드 마이크로 블레이드에 있어 고체윤활제인 흑연과 $MoS_2$의 첨가에 따른 마모 특성을 비교하였다. 마모시험의 분위기는 상온에서 건식 분위기로 진행 되었으며, 그 결과 흑연을 첨가할 경우 가장 높은 마찰감소를 보임을 확인할 수 있었다. 이번 연구는 상온 및 저 회전 속도에서의 사용을 목적으로 한 다이아몬드공구의 연구 자료로 활용될 것이다.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.35-40
• /
• 2014

Wire drawing is aplastic deformation process that produces a wire with a desired diameter by pulling the end of the wire through a die. During the cold wire drawing process, the temperature between the wire and the die bearing is increased. This temperature increase causesenergy consumption increase, bad wire quality, and decreased die life. To reduce friction and avoid high temperature between the wire and the die in the cold wire drawing process, a dry lubricant with soap particles is used. It is not possible to reused the lubricant onceiron oxide is attached to the soap particlesat high pressure die. In this study, recycling technologies for wasted soap particles with processes of crushing, separation, and screening are developed. From the evaluation, the recycling efficiency was found to be 86.97%.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.