• Title/Summary/Keyword: 건설성과

Search Result 1,608, Processing Time 0.03 seconds

Study on the Development of an Expressway Hard Shoulder Running Algorithm Using Reinforcement Learning (강화학습 기반 고속도로 갓길차로제 운영 알고리즘 개발 연구)

  • Harim Jeong;Sangmin Park;Sungkwan Kang;Ilsoo Yun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.22 no.4
    • /
    • pp.63-77
    • /
    • 2023
  • This study applies reinforcement learning to effectively operate expressway hard shoulder running (HSR). An HSR algorithm was developed, and its effectiveness was evaluated using the VISSIM microscopic simulation program. The simulation evaluated two aspects: mobility and safety. The DQN-based HSR algorithm found speed improvement of up to 26 km/h. Compared to the current method, the difference in the number of conflicts was not significant. Considering the results, a DQN-based HSR operation has a clear effect, and it is necessary to consider adjusting the current operational criteria.

Prediction of future drought in Korea using dynamic Bayesian classifier and bivariate drought frequency analysis (동적 베이지안 분류기와 이변량 가뭄빈도분석을 통한 우리나라 미래 가뭄 전망)

  • Hyeok Kim;Min Ji Kim;Tae-Woong Kim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.193-193
    • /
    • 2023
  • 여러 기후변화 시나리오에 의하면 기상재해의 발생빈도 및 강도가 증가할 것으로 예상된다. 그중 가뭄은 강수량 부족, 하천유량 감소, 토양 함수량 감소, 용수 수요량 증가 등의 다양한 요인으로 인해 발생하며, 한 가지 형태뿐만 아니라 복합적인 형태로 발생할 수 있다. 또한, 우리나라는 지역마다 기후 특성의 편차가 있어 기후변화에 따른 가뭄 취약성과 대응 능력이 지역마다 다르게 나타난다. 따라서 가뭄에 대응하기 위해서는 다양한 요인을 고려한 통합가뭄지수를 활용해야 하며, 미래의 기후변화를 고려하여 종합적으로 가뭄을 평가해야 한다. 본 연구에서는 동적 베이지안 분류기(DNBC) 기반의 통합가뭄지수를 활용하여 우리나라 전국에 대해 수문학적 위험도를 분석하고 미래 가뭄을 전망하였다. 기상학적, 수문학적, 농업적 및 사회경제적 요인을 고려한 통합가뭄지수를 산정하기 위하여 DNBC 분류기의 인자로 기후변화 시나리오 기반의 기상학적 가뭄지수 SPI, 수문학적 가뭄지수 SDI, 농업적 가뭄지수 ESI와 사회경제적 가뭄지수 WSCI를 활용하였다. 산정된 통합가뭄지수의 시계열을 기반으로 심도와 지속기간을 추출하고, 코플라 함수를 활용한 이변량 가뭄빈도분석을 수행하였다. 이후, 이변량 가뭄빈도분석에 의해 산정된 재현기간을 활용하여 수문학적 위험도를 산정하였다. 그 결과, P1(2021~2040) 기간이 수문학적 위험도 R=0.588로 가장 높은 위험도를 나타냈으며, 이후 P2(2041~2070) 기간까지 감소하였다가 P3(2071~2099) 기간에 다시 증가하는 추세를 보였다. P1(2021~2040) 기간과 P3(2071~2099) 기간은 영산강 유역이 각각 R=0.625(P1), R=0.550(P3)으로 가장 높은 위험도를 나타냈으나, P2(2041~2070) 기간은 금강 유역이 수문학적 위험도 R=0.482로 가장 높게 나타났다. 본 연구결과를 통해 향후 미래 가뭄에 대한 가뭄계획 수립 시에 기초자료로서 활용성이 높을 것으로 기대된다.

  • PDF

Spatio-temporal pattern of energy fluxes in Northeast Asia using CLM5 (CLM5 기반 동북아시아 에너지 플럭스 분석 및 검증)

  • Yulan Li;Nguyen Thi Ngoc My;Minsun Kang;Minha Choi
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.434-434
    • /
    • 2023
  • 다양한 지면 모형은 대기 강제력 데이터 세트에 의해 구동되며 육지의 물, 에너지 및 생지화학적 순환의 해석에 활용된다. 그 중 에너지 플럭스 교환을 추정하는 것은 극심한 가뭄, 폭염, 물 부족 등 극한 기후 현상에서 중요한 역할을 한다. 에너지 플럭스는 기상기후조건과 토지피복의 변화에 따른 영향을 받고 있는데 그 영향을 구체적으로 조사하는 것은 생태계 프로세스의 매커니즘을 구성하는 데 필수적이다. 본 연구에서는 최신버전인 Community Land Model 버전 5.0 (CLM5)를 이용하여 동북아시아 지역의 에너지 플럭스의 시공간분포를 분석하였다. CLM5의 시뮬레이션은 1991년부터 2010년까지 2.5° × 2.5° 그리드에서 실행되었고 주요 에너지 인자인 순복사량, 현열, 잠열을 모의하였으며, 실행결과는 FLUXNET의 동북아시아 사이트의 관측자료를 이용하여 모델을 검증 및 평가하였다. 대기 강제력 변수의 차이는 모의 결과에 영향을 미치기 때문에 수문인자와 토지피복유형에 따른 에너지 플럭스의 변동성을 분석하였고 잠열을 식생 증발산열과 지면 증발열로 파티션하여 연구지역에 따른 각 구성요소의 비율을 산정하였다. 20년간의 순복사열, 잠열과 온도의 시공간적 변동성의 연 추세를 분석한 결과 동북아시아의 대부분 지역에서 잠열과 온도는 소폭 증가되였고 순복사열은 중국 내륙과 몽골지역에서 감소되였다. 본 연구는 지표와 대기 사이의 에너지 교환에 대해 분석하였으며 이후 증발산 및 물 플럭스와의 연동성과 관계성 분석에 활용하여 기후변화를 이해하는 데 기여할수 있을 것으로 사료된다.

  • PDF

Study on the Change of Rating Curve by Monitoring of Downstream Weir with Gates Operation (하류 보 운영 모니터링을 통한 수위-유량관계곡선 변화 연구)

  • Kim, Soo Jeong;Park, Jun Su;Lee, Jae Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.411-411
    • /
    • 2022
  • 보는 수로나 하천의 수위를 조절하고 취수 등의 편의를 제공하기 위해 건설되는 하천 구조물이다. 일반적인 보(고정보)는 상시 담수 되어 농업용수, 생활용수, 공업용수 등의 취수원으로 활용되지만, 최근에 설치되는 보(가동보)들은 수문을 설치하여 필요에 따라 수위를 조절할 수 있게 되어 있다. 이와 같은 보의 운영은 보 상류의 유속, 수심, 흐름 특성, 하천 형상 등의 변화를 발생시킨다. 특히 하류 보는 운영현황에 따라 하천 흐름에 직접적인 영향을 주기 때문에 하천 흐름 특성에 핵심적인 요소로 볼 수 있다. 따라서 이에 대한 모니터링이 필요하며 이에 따른 수위-유량관계를 규명할 필요가 있다. 본 연구에서는 함평천 유역에 위치한 함평군(영수교)관측소를 대상으로 하류 약 1.3km에 위치한 개량형 공압식 가동보의 2021년 기립각도 변화에 대한 보 모니터링을 실시하여 수위-유량관계 변화를 분석하였다. 2021년에는 가동보의 기립각도 변화 및 취수조건에 따라 총 37회의 수위관측 및 유량측정을 하였으며 총 29회의 가동보의 기립각도를 계측하였다. 2021년 전반기에는 부분개방1, 부분개방2, 부분개방3, 완전개방, 취수조건으로 기간 분리되었고 후반기에는 완전개방, 부분개방3, 부분개방4, 부분개방5 조건으로 가동보의 기립각도에 따라 총 6개의 기간분리가 발생하였다. 결과적으로 본 연구에서는 하류 가동보 운영현황에 대한 보 모니터링과 흐름 특성이 변화하는 기간의 유량측정성과 확보를 통해 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

  • PDF

Analysis of Heavy Metal Concentration in Construction By-Products using Laser-Induced Breakdown Spectroscopy and Membrane Techniques (레이져 유도 플라즈마 분광법(LIBS)과 멤브레인을 활용한 건설용 부산물 내 중금속 분석에 관한 연구)

  • Park, Won-Jun
    • Journal of the Korea Institute of Building Construction
    • /
    • v.23 no.2
    • /
    • pp.113-121
    • /
    • 2023
  • In this study, the applicability and reproducibility of laser induced breakdown spectroscopy(LIBS) for heavy metal analysis in clinker and 5 types of by-products(crushed stone sludge, blast furnace slag, steel slag, waste concrete sludge, bottom ash) were experimentally reviewed. As a result of ICP-MS, XRF, and LIBS analysis of the six samples, the difference between ICP and XRF was confirmed in the quantitative analysis, but the LIBS analysis showed a difference by element from the standard analysis, and only qualitative analysis of the sample was possible. LIBS analysis wavelength was set for three types of heavy metals(Cd - 214.44nm, Pb - 405.78nm, Hg - 253.65nm). As a result of laser irradiation on the surface of the membrane impregnated with a solution of each concentration(1~1000ppm) and dried, the correlation between the spectral intensity and the concentration was confirmed.

Optimization of the Korean Nuclear Fuel Cycle Using Linear Programming (선형계획법을 이용한 한국 원전연료주기의 최적화)

  • Kim, J.I.;Chae, K.N.;Lee, B.W.
    • Nuclear Engineering and Technology
    • /
    • v.27 no.5
    • /
    • pp.721-729
    • /
    • 1995
  • The Korean optimal nuclear fuel cycle strategy from the year 2000 to 2030 is derived using linear programming. The fuel cycle cost, the cost uncertainty, and the natural uranium consumption are used as the criteria for the optimization. These objectives are compromised by fuzzy decision-making technique which maximizes the minimum degree of satisfaction among the three objectives. The options for the back-end fuel cycle are direct disposal, reprocessing, and DUPIC. The optimal fuel cycle strategy of Korea is to start reprocessing in around 2010 and increase its capacity with the maximum of 800 tHM in around 2025, and to star DUPIC processing in 2025. The cot uncertainty and the natural uranium consumption of the optimal fuel cycle strategy are reduced by 7.1% and 6.1%, respectively, at the cost penalty of 5.4% compared with the cost-only optimal solution.

  • PDF

A Study on the Safety and Health Management System Improvement Plan according to the Implementation of the Serious Accident Punishment Act - Focused on H Construction Company (중대재해처벌법 시행에 따른 안전보건경영시스템 개선방안 연구 - H건설사 중심)

  • Kwang-eun Choi
    • Journal of the Society of Disaster Information
    • /
    • v.19 no.2
    • /
    • pp.372-382
    • /
    • 2023
  • Purpose: Suggests measures to improve the construction company's safety management system according to the enforcement of the Severe Accident Punishment Act. Method: The effectiveness of practice-oriented disaster prevention activities was analyzed through safety and health diagnosis of the level of safety and health management system for the countermeasures against the Severe Accident Punishment Act implemented at the construction site and headquarters. Result: The effect of reducing the accident rate and the advancement of the safety and health management system were analyzed by linking the Severe Accident Punishment Act with the safety and health management system, and a plan to improve the safety and health management system was presented through the analysis of the comprehensive results of safety activities before and after the implementation of the Severe Accident Punishment Act. Conclusion: The effect of practical performance measurement was manifested through the improvement of business owners' awareness, the expansion of investment for disaster prevention, and the quantification of disaster prevention activities according to the enforcement of the Severe Accident Punishment Act.

Laboratory Mix Design of C.S.G Method (C.S.G 공법의 실내 배합설계)

  • Kim Ki-Young;Jeon Je-Sung;Kim Yong-Seong
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.5
    • /
    • pp.27-37
    • /
    • 2006
  • Cemented Sand and Gravel (C.S.G) method has become increasingly popular in Japan and throughout the world as a construction method and material. This method is favorably used for cofferdam and large dam because a quarry and aggregate plant facility can be diminished. Also, this method can reduce construction cost, work duration and destruction of environment. In this paper, a methodology for C.S.G mix design based on so-called soil mechanics approach is proposed for trapezoid-shaped dam. The methodology consists of selection of a suitable aggregate, introduction of compaction method, processing to prepare standard specimens, and determination of mix portions. Also, unconfined compressive strength tests and large triaxial compression tests are performed. From the results of the test, correlation equation among strength, elastic modulus and unit cement is proposed.

Proposing a DfMA Modular Housing Model for Disaster Relief Support (재난 지원을 위한 DfMA 모듈러주택 모델 제안)

  • Ji-Eun Lee
    • Land and Housing Review
    • /
    • v.14 no.2
    • /
    • pp.97-107
    • /
    • 2023
  • This study examined how to better provide quality temporary housing for people in the event of natural and social disasters. Design for Manufacture and Assembly (DfMA) is suitable for creating an efficient planning model for the mass production and transport of a modular house. The proposed DfMA model has the following three characteristics. First is the division of the modular house into service modules and functional modules and to create diversity by developing standard parts and multi-functional parts. Second is a flexible layout suitable for various site conditions. Such flexible layouts would allow identical homes to be mass produced and deployed to a variety of locations, both nationally and internationally. Third is to simplify and minimize the automation process with dry construction to increase production efficiency. Application of this DfMA design method can lead to reduced construction time and cost and improve housing quality.

Application of 4th Industrial Revolution Technology to Implement Smart-Eco River (스마트 에코 리버 구현을 위한 4차산업혁명 기술의 적용)

  • Kim, Sunghoon;Jang, Suhyung;Lee, Eulrae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.11-11
    • /
    • 2020
  • 18년 물관리일원화 이후 인프라와 사람 중심으로부터 자연과 인간의 조화를 위한 환경·생태계의 자연성 회복으로의 물관리 패러다임 전환이 빠르게 이루어지고 있으며, 대규모 국책사업이후의 하천 관리에 있어서도 기존의 이수, 치수, 환경이라는 단순한 기능적 구분을 벗어나 보다 근본적이고 장기적인 대국민 서비스로의 전환을 도모하고 있다. 또한, ICBAM 등으로 정의되는 4차산업혁명 기반 기술의 접목이 거의 대부분의 분야에서 이루어지고 있는 것을 실질적으로 체감하는 시기가 도래하였다. 그러나, 하천 및 수자원 관리분야에서의 기술은 근대 엔지니어링의 기초가 되는 수로 건설 등으로부터 시발되어 사실상 가장 앞선 과학적 진보의 토대를 갖추었으나 최근의 기술적 트렌드를 잘 추종하지 못하는 것처럼 비추어 지는 것이 사실이다. 주된 이유로서 기후변화라는 광범위하고 장기적인 입력요소를 가진 하천관리 시스템의 특성상 불확실성의 추정 및 즉각적인 응답이 어려운 부분이 분명히 존재하지만, 실질적으로 여전히 해소되지 않는 부분은 하천의 기초자료 수집에 대한 효율성과 신뢰도가 낮은 것이라고 하겠다. 또한, 유역으로부터 댐-다기능보-하천으로 이어지는 의사결정을 위한 다양한 형태의 자료로부터 적절한 정보를 수집하는 체계(거버넌스의 문제이자 기술적/재정적 한계)가 확립되지 않은 점도 고려해야 할 것이다. 본 연구에서는 인공지능을 활용한 하천의 유량 예측 등을 위해 필요한 수자원 기초데이터의 근원적인 수집 및 관리상의 문제점에 대해서 검토하고자 하였으며, ARIMA, Kalman Filtering, MA 및 복합기법을 통한 자료처리 기법을 적용하여 상황에 맞게 오차 및 불확실성의 저감을 위한 방안을 찾고자 하였다. 또한, 이용자 중심의 하천 관리에 근접한다고 볼 수 있는 스마트워터시티 개념에서의 바람직한 하천관리 기법에 대해서 논의하고, 관련하여 근자에 개발한 하천의 물리적 해석 도구들에 대해서 적용 사례를 검토한다. 마지막으로, 지식기반의 하천관리 의사결정 플랫폼 개발을 위해서 기존의 기계학습을 통한 자동화된 의사결정에 부가하여 전문가와 시스템이 상호작용을 통해서 AI를 학습시켜 결정한 사항을 전문가의 의사결정에 참고하는 MCRDR기법의 적용의 적용 가능성과 도입 방향에 대해서 논의하였다.

  • PDF