• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.475-483
• /
• 2007

With increasing demand for LNG as energy resources and need for $CO_2$ sequestration as greenhouse gas, more storage facilities are required in Korea. Due to the recent acute safety concerns and land shortage, storage facilities tend to be located underground. In design and construction of underground storage for low and high temperature materials, besides their mechanical characteristics, the thermal characteristics of rock under temperature variation should be understood. In this study, laboratory experiments for the measurement of the thermal expansion coefficient of rock were performed using strain gauge in consideration of the particle size of mineral and experiment temperature range. Experiment results show that thermal expansion coefficient decreased as the temperature decreases. In addition, linear thermal expansion coefficient was developed for typical Korean rocks such as granite. The results of this study can be utilized for the evaluation of thermal propagation in rock mass and the thermo-mechanical stability of underground facilities.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.281-291
• /
• 2002

This paper describes the minimum cost design of prestressed reinforced concrete (PRC) hem with rectangular section. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non prestressing steel, and formwork is minimized. The design constraints include limits on the minimum deflection, flexural and shear strengths, in addition to ductility requirements, and upper-Lower bounds on design variables as stipulated by the specification. The optimization is carried out using the methods based on discretized continuum-type optimality criteria(DCOC). Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables - effective depth, eccentricity of prestressing steel and non prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. In this paper the effective depth is considered to be freely-varying and one uniform for the entire multispan beam respectively. Also the maximum eccentricity of prestressing force is considered in every span. In order to show the applicability and efficiency of the derived algorithm, several numerical examples of PRC continuous beams are solved.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.301-312
• /
• 2012

This paper studied the applicable case study on the BIM, based on a structural design process for office buildings. The design process and the applicable system are provided from the results of the research project on the system development of a virtual construction. The case study evaluated the work productivity and economic application of the process and the developed system. The study mainly takes steel structures into account. By using the structural analysis model and the basic design documents, it is able to create the basic construction model and the construction structural model. Likewise, the integrated model is built by IFC from the finished construction structural model. It checked the interoperability of the information among the various BIM design tools. The work environment was efficiently improved by establishing the BIM process, and work productivity could be increased with the help of the modeling automation for connections at the construction design stage.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.1
• /
• pp.83-95
• /
• 2009

This paper provides a general overview and critical assessment of Daedeok Science Town (DST) in Korea, mainly through the lens of the related literature. DST symbolizes the government-led creation of a new science town and represents a bold attempt to consolidate national R&D efforts in a designated area with a view to supplying basic scientific knowledge to industries nationwide. It has achieved considerable success by improving the research environment and promoting venture spin-offs and network formation. However, while DST has played a pivotal role in ushering in the era of the knowledge-based economy, new measures are required for it to remain viable. To this end, efforts should be made to direct government support toward new firm establishment, finance, and tighter networking. DST also needs to host large corporations in the area as these could both act as a market for venture businesses and serve as providers of funds.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.701-704
• /
• 2008

Actuality, amount of electric power is rising together with business expansion. But the most power plant is consisted a thermal power. People have been burning fuel like a coal, and it bring the cinder concrete. Fly-ash is use to the high-degree in construction material, but in case of bottom-ash had been disused the whole quantity. Intermittently, the academic world laid his studies for bottom-ash. Thus, this study contents are a characteristic of be not harden concrete incorporating fine aggregate, a strength of harden concrete, elastic modulus and a unit mass. And there do for the sake to examine utility value of bottom-ash and improve of light weight concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.417-420
• /
• 2008

The requirement for durability of concrete is increasing recently as a large-scale concrete structure is built. For this reason, the concern about high-durable concrete is being high. Recently, metakaoline to be profitable in economical aspect as well as to have strength and durability of level similar to silica fume is evaluated highly as new admixture. In this study, the scaling, the drying shrinkage, the chloride resistance and the air-void structure are compared for both metakaolin and silica fume concrete. According to the results, the replacement of metakaoline improved the resistance of chloride penetration, freezing and thawing in concrete. On the other hand, as metakaolin was replaced to 10%, it was similar level with OPC in the property of scaling. It was showed that replacement of only metakaoline was similar with OPC in the drying shrinkage. However, MS5 reduced the drying shrinkage about 10%. In conclusion, replacement of the metakaoline 10% is the most excellent performance in terms of durability of concrete.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.15-21
• /
• 2015

Since the introduction of 'the rule for computerizing subsoil investigation results and its application' in 2007, the DB construction of the national geotechnical information by Ministry of Land, Transport and Maritime Affairs (MOLTMA) has been performed. According to the Integrated DB Center of National Geotechnical Information, there have been 180 thousands borehole information stored in the system. In this study, the time-series analyses of precision on the most used information, the depth of stratum and ground water level, were performed to evaluate the effect of the initiation of the rule established in 2007. The precisions were evaluated based on the statistical analyses using kurtosis and normal distribution. Based on the results, the increase of precision after 2007 and the affirmative effects of the rule established in 2007 are confirmed. Furthermore, the precision of the regional information can be achieved with the precision analyses on the information from various areas.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.5
• /
• pp.17-26
• /
• 2017

Tunnel excavation in jointed rock mass induces a displacement along tunnel excavation line and its assessment is very important to ensure the stability of tunnel and a demanded space. Tunnel displacement is directly related to the deformation modulus of ground and therefore it is essential to know the value of the parameter. However, most rock masses where tunnels are constructed are generally jointed and it is difficult to find out the deformation modulus of jointed rock mass simply based on an homogeneous isotropic elastic medium because the deformation modulus is highly affected by joint condition as well as rock type. Accordingly, this study carried out extensive numerical parametric studies to examine the variation of deformation modulus in different joint conditions and rock types under the condition of tunnel excavation. The study results were compared with existing empirical relationships and also shown in the chart of deformation modulus variation in different jointed rock mass conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1447-1452
• /
• 2010

Ubiquitous society to build basic infrastructure in the power supply and power equipment safety is important. u-City in order to prevent the disaster of u-IT Power Equipment Performance Module and the security for the safety of the u-City is necessary. In this paper, the power unit of u-IT module, temperature sensor, humidity sensor, equipped with sensors arranged throughout the fire, and home distribution boards, Home Network Wall-Pad, Blocker, MPNP black boxes, arc detection, arc safety equipment, outlet of the modular performance evaluation methods and security methods will be studied. u-IT power devices and sensors to analyze the information conveyed by proactive risk and ensure safety, access control, authentication, security safeguards, such as u-IT integrated management system for electrical safety and strengthen the security, safety and security with a u-City will contribute to the construction and operation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.560-566
• /
• 2010

Port of Samcheonpo, designated as a Trading Port, is constructing New Port for the increase in trade and the requirement of maritime safety is growing. To meet these requirement for maritime safety, hydrographic surveying around south sea area of Samcheonpo using Multibeam Echo Sounder(MBES), DGPS etc was conducted. In this study, major item of hydrographic surveying such as sounding data was acquired and analyzed depth data comparing with vertical uncertainty in the special publication for hydrographic minimum specification published in Feb, 2008 by International Hydrographic Organization. By analyzing the depth data with 3 steps procedure, the port and starboard beam by removing the outskirts of the data processing could improve the efficiency and accuracy. The error of south sea were about 0.2m and the upper central part of the error were within 0.2m. Depth data of the study area are included in the 99% of 1st order and satisfied with a 100% tolerance of special order based on the international hydrograhic survey standard. This study will be a good case to support efficient decision-making for safe navigation, coastal management.