• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.19-30
• /
• 2010

Bentonite-based grout has been widely used to seal a borehole constructed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because of its high swelling potential and low hydraulic conductivity. Three types of bentonites were compared one another in terms of viscosity and thermal conductivity in this paper. The viscosity and thermal conductivity of the grouts with bentonite contents of 5%, 10%, 15%, 20% and 25% by weight were examined to take into account a variable water content of bentonite grout depending on field conditions. To evaluate the effect of salinity (i.e., concentration of NaCl : 0.1M, 0.25M, and 0.5M) on swelling potential of the bentonite-based grouts, a series of volume reduction tests were performed. In addition, if the viscosity of bentonite-water mixture is relatively low, particle segregation can occur. To examine the segregation phenomenon, the degree of segregation has been evaluated for the bentonite grouts especially in case of relatively low viscosity. From the experimental results, it is found that (1) the viscosity of the bentonite mixture increased with time and/or with increasing the mixing ratio. However, the thermal conductivity of the bentonite mixture did not increase with time but increased with increasing the mixing ratio; (2) If bentonite grout has a relatively high swelling index, the volume reduction ratio in the saline condition will be low; (3) The additive, such as a silica sand, can settle down on the bottom of the borehole if the bentonite has a very low viscosity. Consequently, the thermal conductivity of the upper portion of the ground heat exchanger will be much smaller than that of the lower portion.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.142-160
• /
• 2023

The position of the people who participated in the Bapyo Ritual held in the reign of King Sejong and the corresponding costumes were examined. The king, who was the executive body of the ritual, wore Myeon-Bok, a court dress, and Myeon-Bok was Gujang-Bok made of Jang-wha on Guryu-Pyeongcheongwan. Crown princes, royal families, and government officials wore Oryang-Gwan and Jekraeui, which were Jobok. The crown princes' Joboks were changed from Oryang-Gwan to Wukryang-Gwan in the dynasty year 10 of King Sejong, and in the year of King Munjong's accession, Myeon-Bok was received, and after King Danjong, the crown princes wore Palryu-Pyeongcheongwan and Chiljang-Bok. Diplomats and Jongsagwan who were the envoys wore Sangbok. A Sangbok worn by the diplomat was Samo with Danryeong, Seo-Dae, and Hyeopgeum-Hwa, and a Sangbok worn by Jongsagwan was Samo, Danryeong, Heukgak-Dae, and Heukpi-Hwa. Byulgam, who served as an attendant to the king in the king's close quarters, wore Gongbok and Sangbok. Gongbok consisted of Ja-Geon, Danryeong and Heukpi-Hwa, and Sangbok consisted of orange color Cho-Rip, Jikryeong, Joa, and Heukpi-Hwa. The person holding San, Gae , Sujeongjang, and Geumwolbu wore Ja-Geon and Cheong-Ui, and Seon wore Pimoja and Hong-Ui. Siwigun wore armor and helmets equipped with weapons. Among court musicians, Aksa's costumes consisted of Bokdu, Bigongbok, Geumdonghyeokdae, Bibaekdaedae, and Opiri, and Aksaeng's one composed of Gaechaek, Bisuransam, Hyupgo, Mal, Maldae, and Opiri. As a result of the above, the process of ceremonial clothes becoming uniform clothes in the reign of King Sejong was confirmed. The king and lower-ranking officials such as crown princes, government officials, diplomats, Byulgam, armies for ceremonial weaponry, and court musicians participating in the Bapyo Ritual wore the highest grade of ceremonial clothes for each class. King Sejong had repeated discussions to build a nation based on Confucianism, and arranged each rite and corresponding costume, and the Bapyo Ritual costume was also systematically prepared for each position. The ceremonial clothing organized during the reign of King Sejong was regulated in Yejon and became the basis for continuing to the late Joseon Dynasty.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.457-491
• /
• 2008

As stage equipment export markets along with special lighting service lack the attraction for already globally established businesses, such markets can be viewed as an advantageous opportunity for SMEs as in general. In reality, global businesses tend to focus on large construction projects and this indicates relatively less substantial markets such as stage equipment and special lighting service export are more suitable for SME businesses. However, possible problems may be recognized as following; doubtful capabilities by such businesses to join in the vast and competitive global market and pursue manufacturing and service based export. This point is also supported by the fact that such in general SME businesses have substantially less experience in exporting products and services abroad. Realizing the distinctive features of the Korean economy, it is unarguable that every sector and area of global market must be regarded and monitored closely. Hence, it can be argued that there is an imminent need for establishment of supportive institution to assist export process of combination of stage equipments and special lighting service. This study emphasizes the need to improve export process of stage equipments, special lighting services as well as other related products and services which have been focused in domestic market only until now. Further, it also analyzed the potential prospect of such direction reconciling current crisis our manufacturing industry is facing. Even though it maybe regarded as one of the niche market for export of Korea in the short term view, stage equipment and special lighting service industry may rapidly grow as the global cultural industries have grown along with the increase of national income earnings overall. Due to such advantageous features, it can be expected that such industries will show strong growth in the near future. After analyzing the fact that Korea's plants (eg. powerplants) export sector is at its boom, there is a need to transform stage equipment and special lighting service export market into a primary market from a secondary(niche) market for SMEs. This study is viewed from the Korean economic and export sector aspect in the aim of seeking a solution to conquest our realistic limit in our export sector by developing a suitable export model. There have been cases of very few attempts to expand abroad by SMEs who have failed miserably due to their failure to adapt to foreign culture, practice and languages as well as substantial lack in experience in export marketing. Despite this, neglecting our manufacturing industry as it is which is showing its limit and problems is out of option therefore, it is imminent that we come up with an effective measure to address this problem and service export can be suggested as one of them. This study reveals manufacturing-service export model of stage equipment and special lighting service and its related areas is recognized as a field with a very strong future and furthermore, it is expected to bring synergy effects in manufacturing and services sector as well. Further, the operation strategy contains combination, composition and fusion(convergence) of manufacturing and service sectors which could derive various of export products which displays greater success probability or this export model. The outcome of this research is expected to become a useful source for enterprises related to such industry which are seeking a possible global expansion. Furthermore, it is also expected to become a catalyst which fastens the process of global expansion and not only that, we are firmly assured that this study will become an opportunity to improve our current policies and institutions related to this area's export market.