• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.105-118
• /
• 2022

The demand for information related to 3D spatial objects model in metaverse, smart cities, digital twins, autonomous vehicles, urban air mobility will be increased. 3D model construction for spatial objects is possible with various equipments such as satellite-, aerial-, ground platforms and technologies such as modeling, artificial intelligence, image matching. However, it is not easy to quickly detect and convert spatial objects that need updating. In this study, based on spatial information (features) and attributes, using matching elements such as address code, number of floors, building name, and area, the converged building DB and the detected building DB are constructed. Both to support above and to verify the suitability of object selection that needs to be updated, one system prototype was developed. When constructing the converged building DB, the convergence of spatial information and attributes was impossible or failed in some buildings, and the matching rate was low at about 80%. It is believed that this is due to omitting of attributes about many building objects, especially in the pilot test area. This system prototype will support the establishment of an efficient drone shooting plan for the rapid update of 3D spatial objects, thereby preventing duplication and unnecessary construction of spatial objects, thereby greatly contributing to object improvement and cost reduction.

• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.551-558
• /
• 2015

Lateral displacement in the most complex-shaped tall buildings is caused by eccentric gravity loads which are induced by the difference in location between a center of mass and a center of stiffness. The lateral displacements obtained from analysis, using conventional procedures, are prone to overestimate the actual values because much of realignment efforts made during construction phase are ignored. In construction sequence analysis, the self-leveling of slab and the verticality of columns/walls could be considered at each construction stage. Moreover, the displacement compensation can be achieved by manual process such as re-centering - locating to global coordinates through surveying. Because the lateral displacement increases with the building height, it is necessary to set up adjustment plan through construction stage analysis in advance in order to result in displacements less than the allowable limits. Because analytical solution includes lots of assumptions, the pre-adjusting displacement should be reasonably controlled with considerations for the uncertainty due to these assumptions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.49-58
• /
• 2004

Drift design of a high-rise building is a governing factor in the determination of structural weights and lateral resisting systems. However, high-rise buildings are composed of tens of thousands of structural member, designer can not know which members are active to lateral drift control and how much they contribute to lateral drifts. Resizing technique was proved to be a practical method for drift design of high-rise buildings. However, no resizing algorithm has been considered the effect of vertical loads in drift designs. Thus, in this paper, a resizing algorithm has been developed for drift designs of high-rise buildings subjected to both lateral and vertical loads. The drift design model has been applied to drift designs of two high-rise building examples.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.479-488
• /
• 2008

This paper performs investigation of the state-of-the-art approaches to building extraction in terms of their sensory input data and methodologies. For the last decades, there have been many types of sensory input data introduced into the mapping science and engineering field, which are considerably diverse in aspects of spatial resolution and data processing. With the cutting-edge technology in this field, accordingly, one of the key issues in GIS is to reconstruct three -dimensional virtual models of the real world to meet the requirements occurring in spatial applications such as urban design, disaster management, and civil works. Thus, this study investigates the strengths and weaknesses of previous approaches to automating building extraction with two categories - building detection and modeling and with sensor types categorized. The findings in this study can be utilized in enhancing automation algorithms and choosing suitable sensors, so that they can be optimized for a specific purpose.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.35-43
• /
• 2013

Georeferenced SLI(Street-Level Imagery) services such as Google Streetview, which contain abundant information about the real world, can increase its applicability substantially through conflation with other spatial datasets. For this purpose, we propose a method to improve a correspondence of building region to combine building information more accurately. First, the spatial inconsistency between SLI and vector map is removed by alignment based on road intersections. Then, visible building regions are searched from the spatial inconsistency-removed vector map, and the optimal corresponding building areas are determined in the SLI scene using the visible regions as seed information. The experimental results demonstrated that our method had improved the accuracy of building region correspondence by about 8%. Therefore, our method can be utilized effectively for enhancement of conflation service based on the SLI.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.238-239
• /
• 2010

주거 상업용 건물에 있어 최근 TV, LED 조명, 컴퓨터, IT 기기들과 같은 직류를 사용하는 부하가 점차 증가함에 따라 기존의 교류 배전 기반의 건물 전력구조에서 에너지절감을 위한 하나의 방안으로 직류기반의 건물 배전구조에 대한 도입에 대한 연구가 활발히 이뤄지고 있다. 또한 직류 형태의 전원인 태양광 발전, 연료전지 등의 신재생 에너지와 가정 및 전기자동차용 배터리의 등장은 직류 기반 전력구조가 가지는 강점을 더욱 부각시키고 있다. 직류 배전 시스템은 기존 교류 배전에서 직류부하를 위한 다중의 전력 변환 과정을 최소화함으로서 전원 및 부하에서 소모되는 에너지를 절감하여 전력시장 내 전체적인 탄소배출량 저감에 기여할 수 있을 것으로 고려되어지고 있다. 이는 직류배전 시스템의 에너지 저감 효용성 이외 기존 교류배전 대비 부하단 부품 수의 감소에 따른 신뢰성 향상 및 가격 저감, 무효전력 고려사항의 제거 등 많은 장점을 가지기 때문이다. 본 논문에서는 소용량 건물에 직류배전 구조가 도입될 경우 실현 가능성이 높은 대표적 직류 배전 구조들을 Functional Modeling 기법을 통해 모델링하며, 시뮬레이션을 통해 기존의 교류 배전 건물과 함께 각각의 전력계 구조에 대한 효율 및 장단점들을 정성적으로 비교하고, 구현에 필요한 고려사항들을 제시한다.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.422-430
• /
• 2018

Increase in oil prices and building energy consumption has been a great burden for Korea which has significant energy dependence on foreign energy sources. In this context, reduction of building energy consumption, which comprises 40% of total energy consumption, is a very important issue. This research therefore empirically analyzed a hospital "P" that implemented ICT-based energy consumption and cost reduction initiative. The hospital first replaced existing water absorber for heating/cooling air and boiler for heating water with water heat storage heat pump system. This was accompanied by subscribing to different electricity price plans to maximize cost reduction. Secondly, the hospital additionally applied ICT-based optimized control algorithm that considers surrounding factors (external temperature, changes in energy demand). The analysis of these mechanisms indicate that the ICT-based energy consumption and cost reduction initiative for hospitals can reduce energy consumption by 53.6% with replacement of low-efficiency equipment and additionally by 18.2% with optimized control algorithm. The mechanisms will provide energy consumption reduction opportunities for other hospitals and buildings with high energy consumption.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.759-764
• /
• 2017

The paper is intended to explore the spatial relations between flooded buildings and urban expansion phenomena by employing urban expansion intensity index and hotspot analysis methods for the case of Gangneung. Two major results are as followed; first, flooding susceptible areas are found in the regions where the highly intense development occurs within a short period of time, so called pseudo-urbanization. Second, less flooded buildings exist in old towns where it is believed that there is the lack of urban infrastructure services. This study indicates the possibility that the highly intense development and pseudo-urbanization with a relatively short time period relate to flooded building events. In addition, the possibility leads to another issue that new developments might be increasing the flooding vulnerability worse than before, particularly, to the adjacent old towns. For the better understanding, it is desirable to have further related case studies in the near future.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.5
• /
• pp.9-16
• /
• 2021

In this paper, we propose a building exploration drone that can be used for a digital twin-based building control system. The existing building control system using a fixed position sensor box has a problem that a management blind spot occurs. And because people patrol themselves, it takes a lot of human resources. In this paper, a drone equipped with a temperature and humidity sensor and a gas leak detection sensor is used to search the internal path of the building centering on the control blind spot. It also aims to solve the problem of the building control system by transmitting information in real time along with the video. In addition, it has a stable hovering function using an optical floor sensor and can be applied to an existing digital twin-based building control system. The results of this study are believed to be of great help in improving the quality of digital twin control systems using drones.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.266-269
• /
• 2012

화재 시뮬레이션을 이용하면, 건축물에서 화재가 발생하는 경우 건물에 설치된 감지 시스템 및 자동식 소화설비 등의 작동 여부에 따라 건물 내부의 온도 변화, 산소 및 일산화탄소 농도 변화, 연기유동 현상 등 화재 안전에 관련된 요소를 확인, 분석이 가능하기 때문에 건물의 화재 안전성을 검증하는데 활용할 수 있고 방재시스템 설계 조건을 변경하여 반복 시뮬레이션을 실시함으로써 보다 효율성이 높은 방재 시스템을 설계 및 채택할 수 있다. 또한 화재 시뮬레이션 결과를 감안하여 유사시 효과적으로 대응할 수 있도록 방재계획을 수립할 수 있고, 건축물의 구조, 내장재 및 수용품에 대한 설계, 배치 등에 사용할 수 있으며, 화재사고조사 및 원인 규명에도 활용할 수 있는 등 화재 시뮬레이션의 활용분야는 광범위하다. 최근 국내에도 화재로 인한 인적/물적 피해와 화재 안전 설계에 대한 관심증가로 화재 모델에 대한 많은 연구가 이루어지고 있다. 그러나 대부분의 연구가 시뮬레이션을 이용한 결과 분석에 치중되어있고 화재 시뮬레이션에 관한 특성 연구 및 개발은 거의 이루어지지 않고 있다. 본 자료는 국내에서 화재 시뮬레이션 코드로 많이 알려지지 않았으며, 유럽에서 개발된 SOFIE(Simulation of Fire in enclosures)에 대해서 기초적인 연구를 수행하였으며, SOFIE에 대한 특정 문제나 평가 부분은 다루지 아니하였다.