• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.54-60
• /
• 2000

• 방재와보험
• /
• s.48
• /
• pp.42-45
• /
• 1990

• The Magazine for Energy Service Companies
• /
• s.3
• /
• pp.52-55
• /
• 2000

• Korean Architects
• /
• no.1 s.393
• /
• pp.78-85
• /
• 2002

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.117-118
• /
• 2010

In this study, seismic capacities of reinforced concrete school buildings in S, G and J provinces(korea) are evaluated based on the rapid-screening method proposed in the previous research(Ref.1). And also, slight, medium and severe earthquake damage ratios, estimated in terms of ground acceleration levels(0.1g~0.25g), are also assessed herein.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.114-119
• /
• 2009

This study has been conducted to describe the establishment of national measures to reduce world energy consumption and $CO_2$ Emission. Particularly, Reductions in energy consumption from building operation is the most important part to achieve these national objectives. Element to evaluate the quantitative effects of these systems by having rationalized regulation and operation is essential, when planning for building energy reduction design. USGBC(US Green Building Council) have operated sustainable assessment method called LEED, which introduces baseline performance and evaluation direction for building simulation techniques. This research analyzed Quantitative assessments of the building energy consumption and analyzed baseline figures to provide comparative analysis with standard building settings.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.3
• /
• pp.155-166
• /
• 2008

The performance evaluation of a new building is becoming more important because efficient design alone is often not sufficient to deliver an efficient building. However, there is a lack of standard evaluation methods to measure the energy performance of a new construction that has Energy Conservation Design Measures(ECDMs). This study presents an enhanced method based on calibrated whole-building simulation for evaluating the energy performance of new commercial buildings and demonstrates its use using a case-study building, including: an Energy Use Index(EUI) comparison with sub-metered data and an evaluation of the performance of specific ECDMs. The use of this method has determined that the case-study building was shown to use approximately 47% less energy than the base-case building that has the same shape and function as the case-study building(i.e., calibrated as-built simulation mode]), but doesn't include the simulated ECDMs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.920-926
• /
• 2005

In this paper, we analyzed the effect by building materials in the case of floor cell design and the penetration loss value by material in each frequency bands through an experiment in high building. Specially, the penetration loss measured about interference signal that is received to direct path, interference signal and flowed in slant path. Also, we analyzed system performance according to path of standard Cell received interference signal.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.77-85
• /
• 2007

With the increase in the demand for sustainable and environment-friendly development all over the world, it becomes an urgent issue for Korea to reduce $CO_2$ emission. Since building industry accounts for about 40% of international energy and resource consumption and $30{\sim}40%$ of $CO_2$ emission, it is essential to prepare for energy-efficient building. This study aims to seek for improvement direction for a domestic Building Energy Efficiency Rating System through the comparison with foreign systems. Two foreign building energy rating systems which have the similar application scope with domestic one, HERS(Home Energy Rating System) and SAP(Standard Assessment Procedure)2005 were selected. As compared with foreign systems, we intended to suggest improvement direction for effective application of Building Energy Efficiency Rating System in Korea.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.497-500
• /
• 2008

3차원 오브젝트의 위치 및 정보 획득을 위한 레이저레이더 시뮬레이션의 성능을 향상시키기 위해서는 시뮬레이션의 결과로 획득되는 공간의 범위와 해당 사물의 정보를 정확하고 빠르게 획득해야 한다. 본 연구에서는 이러한 레이더 시뮬레이션의 성능을 향상시키기 위해서 3차원 공간 데이터를 공간DB에 저장하고, 질의를 수행하여 해당 3차원 오브젝트의 정보를 효과적으로 추출해내는 방법론을 제시하였다. 이를 위해 본 연구에서는 시뮬레이션에서 사용되는 3차원 지형지물(지형, 건물 사물 등) 모델의 정보를 데이터모델링을 통해 토폴로지 형태를 갖도록 하였으며, 이를 공간DB에 저장하고, 레이저 신호와의 연산 쿼리를 시행하는 과정을 예시하였다. 이러한 과정을 구현하기 위하여 OGC 기반의 공간 데이터 타입, 함수, 인덱스들을 제공하는 PostgreSQL과 PostGIS를 사용하였다. 지형, 건물, 탱크 등 이렇게 세 가지의 범주의 사물로 나누어 각각을 공간DB로 구현, 쿼리를 실시하였다. 지형정보는 TIN을 사용하였고, 건물의 좌표 값들은 도화원도에서 추출하였으며, 탱크와 같은 사물은 VRML 모델의 좌표 값을 사용하였다.