• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.351-355
• /
• 1999

서비스 반경이 1이내인 마이크로셀 방식은 기지국의 송신출력을 가능한 작게 하고 안테나의 위치를 주변 건물의 높이보다 낮게 설치하기 때문에 셀 반경내에 있는 지형과 구조물들은 전파특성에 매우 큰 영향을 주므로 셀 내 지형지물의 특성에 따라 기지국의 최적 출력을 구할 수 있는 전파예측 모델이 필요하다. 본 연구에서는 이동국이 가시거리 영역의 전파 음영지역 또는 가시거리 영역과 일정 경사각으로 기울어져 있는 비가시거리 영역에 위치한 경우로 구분하고, 기지국으로부터 송신된 신호가 이동국까지 일정 직진경로를 전파하는 동안, 전파의 반사첫수와 전파경로를 계산할 수있는 연산처리 알고리즘을 개발하여, 이를 웅용하므로써 임의 지점에 위치한 이동국에 도래하는 수신전력을 예측할수 있는 모델을 제안한다. 그리고, 마이크로셀 이동통신 전파환경에서 개발 알고리즘과 제안 전파예측 모델을 시뮬레이션하여, 그 결과를 분석함으로써 마이크로셀 기지국의 최적 위치선정 조건과 기지국 출력에 따른 가입자 서비스 조건을 제시한다.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.337-344
• /
• 2012

Today, the number of super tall buildings are under construction or being planed in Middle East and Asian Countries. For example the burj Khalifa, the tallest building in the world, is completed in 2008 and the height of that is about 800m. Also, Lotte World Tower is under construction in Korea. External environmental conditions such as wind speed, air temperature, humidity and solar radiation around the super tall building differs according to the building height due to the vertical micro climate change. However, the meteorological information used for AC design of building is obtained typically from standard surface meterological station data(~2m above the ground). In this paper the effect of the building envelope on heating and cooling load in super tall building considering the meteorological changes with height was analyzed with simulation method. As results of this research, the guideline to select the building envelop alternatives for super tall building will be suggested in this paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.157-168
• /
• 2000

MDD(Mountainous District Development) has more available area than flatland come into solution for many urban problem arisen from the insufficiency of urban-purpose land and space. When develope the mountainous district, the development must be a development considered the viewscape. To efficiently accomplish the MDD viewscape was considered, firstly we have to know which viewscape element effect on many observers when they rate the viewscpe preference. As a basical study for MDD viewscape was considered, we used GSIS and ANN(Artificial Neural Network) in cause analysis of viewscape preference. Many observers firstly influenced by“height difference”that represent the difference between elevation of a mountainous and buildings, and secondly floor-area-ratio has influence on viewscape preference, thirdly many observer affected by building coverage among many viewscape elecments considered in this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.214-214
• /
• 2020

전 세계적으로 기후변화로 인해 재난이 빈번히 대형화되고 있으며, 하수처리장과 같은 대형시설물도 자연재해의 위험성이 커지고 침수피해를 받을 확률이 높아지고 있다. 실제로 최근까지 청주 산단 폐수종말처리장, 평택 장당 하수처리장, 광주/곤지암 하수처리장 등이 폭우로 침수돼 가동이 중단되는 사태가 벌어졌다. 하수처리장이 침수될 경우 시설 자체의 1차적 피해도 문제가 되지만, 처리되지 못한 오염물질이 하천으로 흘러 들어가는 2차 피해가 더더욱 문제가 될 수 있다. 본 연구에서는 문제가 발생하기 전에 집중호우 시 각 시설의 취약성을 사전 평가하여 침수 피해를 대비하고, 평가 내용에 따라 침수 피해 사전·사후 대응을 위한 체계, 방법론을 구축, 제시함으로써 침수피해를 최소화하고자 한다. 침수피해의 취약성을 평가하기 위한 기준으로는 시설물의 침수방지를 위한 건물 턱의 높이, 하수처리시설 인근 제방의 유무, 구조적 홍수방어시설 유무, 침수 발생 시 가장 취약한 전력 설비 시설의 위치 및 피해 대책 등 실질적으로 측정 가능한 구조적 요소를 고려하며, 재난대응 매뉴얼 정비, 사전 재난훈련 수행 등 비 구조적인 측면으로도 접근하여 취약성 평가 지표를 도출하고자 한다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.179-186
• /
• 1998

This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea The secondary experiment was conducted to know on growth characteristics, forage yield and forage value of Diplachne fusca L. in order to get a necessary data on possible utilization of native plant as a forage crop and practical use of reclaimed saline land. The results obtained are summarized as follows; 1. The growth of Diplachne fusca L. was neary finished at heading stage. So plant height, leaf length, leaf width, stem diameter, tillering number, fresh weight and dry weight per plant were 137.5cm, 42.6cm, 4.65mm, 2.48mm, 15.3 tiller, 44.68 and 15.3g respectively. 2. Fresh weight was the highest with 4,460kg/10a at heading stage, dry weight was 1,530kg/10a at heading stage and 1,630kg/10a at 20 day after heading. The fresh weight was significantly difference between cutting height level according to cutting time, but total fresh weight was not significantly difference between cutting height level. Total dry weight was significantly difference between cutting height, so it was a large yield at cutting height of 10cm. 3. The contents of crude protein, available protein, digestible protein and TDN were the range of 12.3~3.7%, 12.3~3.7% 10.8~3.6% and 65.2~60.7% according to growth stage, respectively. The highest yield of crude protein, available protein, and digestible protein were showed at heading stage, that of TDN showed at 20 day after heading. The contents of ADF and NDF were the range of 36.4~50.0% and 62.7-80.5% according to growth stage. 4. The contents of P, Ca, K and Mg were the range of 0.31~0.20, 0.70~0.52, 1.74~1.28 and 0.19~0.18% according to growth stage, respectively. The highest yield of P, Ca and K was showed at heading stage, that of Mg showed at 20 day after heading. 5. The contents of ENE, NEL, NEM and NEG were the range of 1.42~1.29, 0.68~0.62, 0.68~0.61 and 0.40~0.35 McaVlb according to growth stage, respectively. The highest yield of ENE, NEL, NEM and NEG was showed at 20 day after heading by inuease after heading. 6. The grasseating ratio of Diplachne fusca L. of before and after heading by milk cattle was 96.5% and 95.3%, respectively.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.323-331
• /
• 2018

This study was conducted to examine the effects of constructing streetside urban forests on particulate matter (PM) content in pedestrian paths and open spaces created between the main streets and buildings in a high-rise, high-density urban area. The study site is a 70m-wide open space between Busan City Hall and Jungang-street in Busan, Korea. The results showed that the density of PM differences between the open space and the adjacent main street were small in regions without linear trees and shrub rows during both the weekdays and weekend. On the other hand, the areas with linear trees and shrub rows were found to have significantly higher concentrations of PM compared to the roadway. In particular, sections with linear trees and shrub rows had higher PM levels both on roads and in adjacent open space, indicating that the composition of linear trees and shrub rows increased the concentration of PM in the off-street open space in areas with wide space between the roadway and building. The impact was more significant in the open space than the roadway. This phenomenon can be explained by the fact that PM generated by vehicles flows through the roadside shrubs by rapid wind flow but does not disperse widely in the pedestrian paths where the wind flow was reduced. In this study, we found that the roadside tree and shrub walls slowed the flow of wind, causing vehicle-emitted PM to accumulate if a wide open space was created between the road and building, resulting in higher concentration of PM in the open space. We confirmed that the distance between the road and building was a critical factor for constructing linear trees and shrub rows to reduce PM generated by vehicle traffic.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.79-88
• /
• 2011

The purpose of this study was to obtain information on rates and salinity levels of irrigation for growth of Kentucky bluegrass by minimizing the hazard of salt accumulation in the sand based growing medium. Root zone profile consists of 20 cm sand based top soil, 20 cm of coarse sand as layer to interrupt capillary rise and 10 cm of reclaimed paddy soil as a base of the root zone profile. Topsoil was a mixture of dredged sand and peat with a ratio of 95%: 5% by volume. The columns were soaked into 5 cm depth saline water reservoir with salinity level of 3-5 $dSm^{-1}$. Salinity levels of irrigation water were 0, 2 and 3 $dSm^{-1}$. Irrigation rates were 3.8, 5.7 and 7.6 mm $day^{-1}$ which were equivalent to 70%, 100% and 130% of average ET (evapotranspiration) rate of Kentucky bluegrass, and irrigation interval was 3 days. Salt accumulation was due to irrigated water and moved up water from shallow water base. At the end of second year, the accumulation of salt in the rootzone showed ECc of3.86, 4.7 and 5.1 $dSm^{-1}$, and SAR of 19.2, 23.9 and 27.5 when the salinities were 0, 2 and 3 dS $m^{-1}$, respectively. Irrigation rates of 100% and 130% of ET rate with saline water did not decrease ECe and SAR in growing media. The growth of KEG was influenced by irrigation rate in the $1^{st}$ year, however, salinity level was more critical in the $2^{nd}$ year. Compared to non-saline water, saline water of 2 and 3 dS $m^{-1}$ resulted in decreased visual quality by 3.2% and 16.5%, by 6.4% and 39.3% in clipping weight, and by 5.5% and 5.0% in root mass, respectively.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.2
• /
• pp.30-37
• /
• 2018

The uniformed regulations for control of the height of buildings owned by individuals to protect landscape of cultural properties are causing serious social conflicts by limiting the development of landowners. It is urgent need of introducing indicators that can resolve such conflicts and evaluate the regulations of buildings, which can satisfy urban development as well as landscape management of cultural properties. Therefore, the purpose of this study is to simulate landscape changes according to the Cultural Heritage Protection Act and National Land Planning and Utilization Act by using Unity3D in the Pungnammun Gate(Treasure No. 308) of Jeonju and its surroundings, where architectural cultural property forms the symbolic landscape of the city. Then some items such as view points, target points were introduced and the quantitative evaluation of landscapes was attempted by applying the indicator of 3D Visual Exposure. As a result, the viewing opportunity and viewing area of Pungnammun Gate were not significantly influenced by changes in landscape according to the two laws. However, the change of the height of buildings by the National Land Planning and Utilization Act, which has the greatest development capacity, confirmed the possibility of weakening the identification of the Pungnammun Gate by increasing 3D Visual Exposure of the background buildings more than two times. Finally, it was confirmed that the skyline of Pungnammun Gate was clearly infringed upon development under the National Land Planning and Utilization Act, but the skyline was maintained similar to the current situation in the regulation by the Cultural Heritage Protection Act. Thus, this study is meaningful in that the application of 3D Visual Exposure showed the possibility of utilization as an indicator for quantitatively evaluating the protection of view on cultural property and skyline according to the changes of building heights.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.525-533
• /
• 2019

There are two feature collection methods in digital mapping using the UAV (Unmanned Aerial Vehicle) Photogrammetry: vectorization and stereo plotting. In vectorization, planar information is extracted from orthomosaics and elevation value obtained from a DSM (Digital Surface Model) or a DEM (Digital Elevation Model). However, the exact determination of the positional accuracy of 3D features such as ground facilities and buildings is very ambiguous, because the accuracy of vectorizing results has been mainly analyzed using only check points placed on the ground. Thus, this study aims to review the possibility of 3D spatial information acquisition and digital map production of vectorization by analyzing the corner point coordinates of different layers as well as check points. To this end, images were taken by a Phantom 4 (DJI) with 3.6 cm of GSD (Ground Sample Distance) at altitude of 90 m. The outcomes indicate that the horizontal RMSE (Root Mean Square Error) of vectorization method is 0.045 cm, which was calculated from residuals at check point compared with those of the field survey results. It is therefore possible to produce a digital topographic (plane) map of 1:1,000 scale using ortho images. On the other hand, the three-dimensional accuracy of vectorization was 0.068~0.162 m in horizontal and 0.090~1.840 m in vertical RMSE. It is thus difficult to obtain 3D spatial information and 1:1,000 digital map production by using vectorization due to a large error in elevation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.340-346
• /
• 1985

Field experiments were carried out to investigate the effects of sowing dates, ferrilizer levels and clipping treatment of forage production and quality of barley and rye in paddy field. The field emergence rates in barley varieties was decreased rapidly at sowing after November. But in rye varieties, it was not decreased even in sowing until Nov. 3. Winter survival of barley and rye varieties were not affected by fertilizer levels. And winter survival decreased with delay in sowing dates in barley varieties, but, it was not influenced by sowing dates in rye varieties. The production of forage dry matter at heading stage was increased with fertilizer levels, and was decreased with delay in sowing dates. Content of crude protein and crude fat of dry forage at heading stage were increased with fertilizer levels. But, content of crude ash, crude fiber and TDN were not influenced by fertilizer levels. As increased fertilizer levels, NFE Content was decreased and TDN yield was increased with fertilizer levels. In comparisons of TDN yield between barley and rye varieties, TDN yield of rye were superior to those of barley. Clipping twice produced more forage yield than clipping once in both crops. However, optimum clipping interval was about 40 days between first and second clipping in rye but not determined in barley. The l2cm clipping height was the highest production in average total yield.