• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.569-572
• /
• 2012

식물공장의 다양한 건물형태에 따른 냉난방부하의 차이를 DesignBuilder를 이용하여 해석하였다. 엽채류 중 상추의 생육 적정온도인 $20^{\circ}C$를 실내온도로 설정하고 식물공장 외벽에 단일창호를 적용하여 온실형태에 따른 냉난방부하 변화를 계산하였다. 보광이 없는 건물자체의 냉난방부하를 계산한 결과 KNU 식물공장 단위유닛과 반원 온실형 식물공장이 냉방부하가 가장 적었다. 보광 적용 후에는 전반적으로 KNU 식물공장 단위유닛과 직사각형 식물공장이 양호한 냉난방 성능을 보여주었다. KNU 식물공장 창호의 면적이 와이드 스팬형보다 크기 때문에 건설비용의 증가가 예상되지만 회전형 스마트 조명 제어시스템을 적용하게 되면 재배면적을 넓히고 공간활용에 유리하다. 또한 LED 사용량을 줄일 수 있어 냉방부하와 보광에 드는 비용을 절감할 수 있다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.9 no.1
• /
• pp.39-49
• /
• 1980

이 보고서는 각종형태의 건물에 있어서 에너지 관리에 대하여 언급한 것이며, 건물의 공기조화를 위한 에너지의 사용방법과 그 관리에 중점을 두고있다.

• 방재와보험
• /
• s.139
• /
• pp.30-33
• /
• 2010

한국화재보험협회는 "화재로 인한 재해보상과 보험가입에 관한 법률"에 의거하여 매년 전국에 소재한 특수건물에 대하여 화재안전점검을 실시하고 있으며, 특수건물에서 화재가 발생할 경우 화재현황 등을 조사 및 분석한 자료를 e-book형태로 발간하여 관계자에게 제공하고 있다. 본고는 지난 11월 발간된 "2009년도 특수건물 화재조사분석" 자료 가운데서 주요 부분을 요약한 것이다.

• Electric Engineers Magazine
• /
• v.238 no.6
• /
• pp.22-25
• /
• 2002

건물은 인류의 역사가 시작되면서 초기에는 움막의 형태에서부터 시작하여 스스로의 생활을 유지하고 자연으로부터 생명의 위험을 보호하기 위한 수단으로서 구축되었다. 원시 농경사회 정착생활이 시작되면서 점차 생활의 규모가 커지고 건물을 건축하는데 문화와 예술적인 요소들이 반영되었으며 기술의 발달과 더불어 건물은 끊임없는 변화가 시도되어왔다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.480-488
• /
• 1994

Low seedling growth rates of white clover (Trifolium repens L.) have been limited its good establishment to pastures. The experiment was done to determine the effect of removal of cotyledon and unifoliolate on the growth and morphological characters of contrasting white clover cultivars for 8 weeks after the treatment. Individual plants of cv. Regal (large leaf), Louisiana S-l (medium-large leaf), Grasslands Huia (medium-small leaf) and Aberystwyth S184 (small leaf) were grown in 10cm plastic pot containing a 2:1:1 soil:sand:peat moss mixture until the cotyledon or unifoliolate stage and then removed one (C1) or two cotyledons (C2) at cotyledon stage, and unifoliolate only (U), unifoliolate and one cotyledon (DC1) or unifoliolate and two cotyledons (DC2) at the unifoliolate stage. To measure the removal effect on biomass and morphological characters (leaf area, petiole and stolon lengths, growing tips and leaves), plants were sampled 4, 6 and 8 weeks after the treatment. Intact plants had greater biomass and morphological characters than removal-treated ones, Removal treatments at cotyledon stage, C1 and C2, were decreased more biomass and morphological characters than removal ones at unifoliolate stage while the severer cotyledon removal, the more reduction. Stolon length per plant and petiole length markedly inclined 6 weeks after the treatments although biomass and the other characters continuously did. Relatively large-leaved cultivar had more biomass, leaf area per plant and longer petiole than the other(s) but the reverse results were true in stolon length, growing tips and no. of leaves per plant. Biomass was linearly increased with increased leaf area but the earlier and severer removal, the less slope. The severer damage of cotyledon and unifoliolate had detrimental effects on the growth and aftermath establishment of white clover

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.187-192
• /
• 2006

도시의 과밀화로 인해 건물들은 고층화, 대형화되고 복잡한 형태를 이루고 있어 건물 이용자들에게 2차원의 정보뿐만 아니라 3차원 공간정보의 필요성이 증가하고 있으며 이를 해결하기 위해 3차원 GIS 모델의 활용이 요구되고 있다. 그러나 현재까지 연구되거나 응용되어 온 3차원 모델은 주로 건물 외부형태의 시각화를 위한 것으로 3차원 공간분석에 응용되기에는 한계가 존재해 왔다. 이에 본 연구에서는 3차원 모델을 공간분석에 적용하는 하나의 방안으로서 건물의 내부공간에서 경로탐색을 구현하기 위한 방법을 제시하였다. 이를 위해 건물 내부의 각 실들과 연결통로 및 기타 시설들을 각각 오브젝트로 분리하여 3차원으로 모델링하였다. 2차원 GIS데이터와 3차원 모델에 각각 벡터기반의 네트워크 모델을 생성하고 DB를 이용하여 두 모델을 연동함으로써 3차원 모델에서 네트워크기반의 경로분석과 탐지기능을 가능하게 하였다.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.53-60
• /
• 2003

Accident occurred by gas explosion in house or building causes damage on lives and properties. To avoid secondary damage, this study drew area ratio of vent area with the experiment for pressure variation with vent area versus building volume by selection of model for different size and shapes of vent area generated by explosion. In addition, Appropriate model was chosen to predict the damage by minimum pressure with the experiment of opening are shapes. This model can prevent secondary damage with the selected vent area and shape to guarantee building safety.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.283-289
• /
• 2015

Three experiments were carried out to determine the effect of harvest maturity and management practices on the dry matter losses and morphological changes of round baled rye silage. Rye was harvested at three growing stages (boot, heading and flowering stage) in three different conditions i) with wilting (unwilted, short wilting and long wilting), ii) with inoculant treatment (untreated, inoculant A and inoculant B) and iii) with three different wrap colors (white, black and green). The morphological changes in round bale silage after 2 months was heavy in the early harvest and unwilted silage. However, harvesting after the heading stage did not change the shape, significantly. Inoculant treatment reduced the morphological changes and dry matter (DM) losses of round baled rye silage. DM loss was decreased with a delayed harvesting date and was significantly reduced by the inoculant. Dramatic changes in the shape were observed in all treatment at boot stage. Inoculant treatment resulted in more severe changes in the boot stage compared to untreated silage. Black color wrapping had the greatest impact among the wrap colors and there were no significant difference in the wrap colors. Harvest maturity and wilting periods was highly correlated (p<0.01) with morphological change. Result of these studies indicated that dry matter content is the most important factor that affects the morphological change in round bale silage.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.352-362
• /
• 2019

The old residences and shops in the backside blocks are affected by the traffic noises from the main road. The noise of the backside roads is affected by the following factors such as the height of the roadside buildings, the distance between the road and the backside streets, distance among adjacent roadside buildings, and the difference of the adjacent building heights. The both noise levels on the road and the backside street were measured simultaneously in 15 urban blocks of a city which can be categorized into two types of roadside building plans ; 1) one single building along the street, 2) buildings arranged on one axis beside the road. As the results, there is no significant noise reduction due to the width of the buildings in general. However, in the cases of buildings arranged on one axis beside the road, it was found that the average noise reduction was 12 dB(A) on the basis of the building height of 4 m. Also, it was analysed that for each 4 m increase in the building height, noise reduction occurred by 2 dB(A) beyond building height of 4 m. In general, it was proved that the noise of the back streets is mainly affected by the lowest height of the roadside buildings. It was found that noise is increased by 1 dB(A) for each 4 m increase of the height difference between adjacent buildings. Also, It was revealed that for each 0.5 m increase in the distance between roadside building, noise reduction decreased by 1 dB(A).

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.75-86
• /
• 1999

Three dimensional city model is composed of man-made and natural features, among these, most of man-made features are buildings. Therefore, it is very important to extract the building informations accurately and promptly to update the existing database. To achieve this, DTM can be reconstructed using building Information which is extracted from DTM, then this can be used as three dimensional city model. Thus, this paper aims to extract building boundaries and heights from high resolution DTM and edge informations of aerial photograph using mathematical morphology and image segmentation. We found that it is possible to extract buildings using opening operation in mathematical morphology and to improve the accuracy of building extraction using edge informations from aerial photograph.