• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.141-152
• /
• 2008

The 3D building modeling is one of crucial components in constructing 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes, which indeed take great amount of time and efforts. In recent years, many researches on 3D building modeling using aerial LiDAR data have been actively performed to aim at overcoming the limitations of existing 3D building modeling methods. Either techniques with interpolated grid data or data fusion with digital map and images have been investigated in most of existing researches on 3D building modeling with aerial LiDAR data. The paper proposed a method of 3D building modeling with LiDAR data only. Firstly, octree-based segmentation is applied recursively to LiDAR data classified as buildings in 3D space until there are no more LiDAR points to be segmented. Once octree-based segmentation is completed, each segmented patch is thereafter merged together based on its geometric spatial characteristics. Secondly, building model components are created with merged patches. Finally, a 3D building model is generated and composed with building model components. The experimental results with real LiDAR data showed that the proposed method was capable of modeling various types of 3D buildings.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.47-56
• /
• 2010

The use of airborne LiDAR data obtained by airborne laser scanners has increased in the field of spatial information such as building modeling. LiDAR data consist of irregularly distributed 3D coordinates and lack visual and semantic information. Therefore, LiDAR data processing is complicate. This study suggested a method of LiDAR data segmentation using roof surface patches from aerial images. Each segmented patch was modeled by analyzing geometric characteristics of the LiDAR data. The optimal functions could be determined with segmented data that fits various shapes of the roof surfaces as flat and slanted planes, dome and arch types. However, satisfiable segmentation results were not obtained occasionally due to shadow and tonal variation on the images. Therefore, methods to remove unnecessary edges result in incorrect segmentation are required.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.109-114
• /
• 2009

At the present time, buildings are designed higher and more complex than ever before. Therefore the potential disasters are happened such as fire, power outage, earthquake, flood, hurricanes. Their disasters require people inside buildings to be evacuated as soon as possible. This paper presents a new disaster evacuation guidance concept of inner buildings, whiche aims at integrated the constructing of a sensor network and a guidance light networks in order to provide a quick detection of disasters and accurate evacuation guidance based on indoor geo-information, and sends these instructions to people. In this paper, we present the integrated logical model based on sensor and guidance light networks for the fire disaster management in inner building using our concept. And we verify proposed logical model according to experiments with visualization and operations on map.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1988-1991
• /
• 2003

본 논문에서는 도로 주변의 나무와 건물, 그리고 옆 차선의 차량 등에 의한 그림자의 영향을 최소화하며 차선을 검출할 수 있는 방법을 제안하였다 우선 Hough transform을 수행하는 데 있어서 계산 시간을 줄이기 위하여 에지 영상에서 수평 투영을 통하여 vanishing line을 검출하였으며, vanishing line 아래 부분에서만 Hough transform을 수행하였다. 그리고 차선 검출을 위하여 Hough 평면에서 θ을 16등분하여 rough한 차선을 검출하였으며, 도로 형태에 대한 사전 지식을 이용하여 차선 검출을 시도하였다. 도로 주변상황이 다른 두 종류의 연속 영상들에 의한 실험 결과, 도로형태에 대하여 가정한 사전 지식과 유사한 영상들에 대하여 차선을 정확하게 검출하였다.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 1999.06a
• /
• pp.89-90
• /
• 1999

페레니얼 라이그라스(Lolium perenne L.)의 질소공급형태에 따른 저장질소의 함량과 재생기간 중 저장질소의 이용 및 재생활력을 구명하고자 수경재배 하였다. (NH$_4$)$_2$SO$_4$, KNO$_3$, Urea, Organic-N 및 NH$_4$NO$_3$의 서로 다른 질소형태로 각각 1mM/week을 4주간 공급하여 건물생산량을 보았고, 예취 후 각각의 질소 형태로 4mM/40days동안 공급하여 흡수된 질소의 함량 및 잔여기관내 축적된 질소의 함량을 관찰하였으며, 예취 후 저장된 질소에 의한 재생활력을 보기 위해 0.2mM NH$_4$NO$_3$의 형태로 동일하게 공급하였다.(중략)

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.120-141
• /
• 2015

This paper is a preliminary study of architectural characteristics of Jangdae (general's podium), which shows one of the technical changes in fortification of Joseon Dynasty. As a facility for commands of generals and training for officers and men, it was located inside a fortress. Although it is not certain when the first Jangdae was built, the number of them dramatically increased around 18th century. Since the top priority function of the Jangdae was the prospect, it was installed at the hilly spot with open architecture. In addition, the open structure of Eupseong fortress towers on the riverside banks could simultaneously offer the functions as viewing around and Jangdae. Since Jangdae was also a place for military drills and reviews of soldiers, a wide podium was positioned at the front to muster the soldiers. This feature was standardized in the space organization of Jangdae in Joseon, and a mere podium was installed unless the topographic restrictions allows enough space. On the other hand, as a place for a commander, the hierarchy of the Jangdae was revealed through a variety of architectural characteristics. The hierarchy was assigned to the commander's space through the altitude difference, and diverse ornaments were added to show a sense of class. The floor plan of the Jangdae building can be largely categorized into rectangle and square, and the typical sizes of the former are $5{\times}4$ Kans (traditional measuring unit between two columns) and $3{\times}2$ Kans. Out of these two types, buildings of $5{\times}4$ Kans were found in flat land and eupseong fortresses with large space, and the relatively smaller ones of $3{\times}2$ Kans in mountain fortresses. All buildings of square floor plan had $3{\times}3$ Kans style, and the center Kan was twice wider than the side Kan to make the central space wide. It seems that the purpose was to secure the interior space of the upper story because the center Kan accounts for the floor area of the upper story. Some Jangdae's had internal story to form overhead space. The multi-roofed tower style with eaves attached to the upper and lower story is found exclusively in Jangdae. The buildings shows the Onkanmulim style which extends Naejinju (inner column) of the lower story to be the Byeonju (outer column) of the upper story, and the log-framed floor in the upper floor was structured by inserting the Changbang (connecting beam) between the Naejinju's and joining the log frames. In addition, the towers in eupseong fortresses had log-framed floor in the upper floor by setting up the high Nuhaju (column underneath a roof) and joining Cheongbang to the upper part of the column while it cannot be regarded as multi-roofed because only the upper part has a roof.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.323-330
• /
• 2012

This study deals with the experiments of liquid dampers with multi cells whose vertical tubes are divided into several square columns for easily changing natural frequencies. Shaking table test is performed to verify control effectiveness of the dampers which are installed on a building structure. To design liquid dampers, a 64-story building structure is reduced to a SDOF structure with 1/20 of similitude laws based on acceleration. The structure model is made up to adjust its mass and stiffness easily, with separate mass and drive parts. Mass parts indicate real structure's weights and drive parts indicate real structure's stiffness with springs and LM guides. Manufactured liquid damper has 18 cells and its natural frequency ranges are 0.65Hz to 0.81Hz. Shaking table test is carried out with one way excitation to compare with only accelerations of a large-scale structure and a structure installed with liquid dampers. Control performance of the liquid damper is expressed by the transfer function from shaking table accelerations to the large-scale structure ones. Testing results show that the liquid damper reduced a large-scale structure's response by tuned natural frequencies.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.62-70
• /
• 2006

As buildings are changing variously from the side of use, efficiency and size, the construction qualities are more importantly recognized. Supervision system was enacted in the Residential Building Law in 1990 and responsibility supervision system in the Construction Engineering Management Law in 1994, respectively. However, recently revised supervision system in 2003 has some limitations: the present problems of appointing supervisor, disposing the supervisors, supervisor's works. Therefore, the aim of this study is to improve the present supervision system for mix-use residential building. By implementing the proposed revised supervision system, it will be able to expect quality improvement, confidence of the owner and the user, development of construction technology, and increase international competitiveness of supervision company.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.238-239
• /
• 2010

주거 상업용 건물에 있어 최근 TV, LED 조명, 컴퓨터, IT 기기들과 같은 직류를 사용하는 부하가 점차 증가함에 따라 기존의 교류 배전 기반의 건물 전력구조에서 에너지절감을 위한 하나의 방안으로 직류기반의 건물 배전구조에 대한 도입에 대한 연구가 활발히 이뤄지고 있다. 또한 직류 형태의 전원인 태양광 발전, 연료전지 등의 신재생 에너지와 가정 및 전기자동차용 배터리의 등장은 직류 기반 전력구조가 가지는 강점을 더욱 부각시키고 있다. 직류 배전 시스템은 기존 교류 배전에서 직류부하를 위한 다중의 전력 변환 과정을 최소화함으로서 전원 및 부하에서 소모되는 에너지를 절감하여 전력시장 내 전체적인 탄소배출량 저감에 기여할 수 있을 것으로 고려되어지고 있다. 이는 직류배전 시스템의 에너지 저감 효용성 이외 기존 교류배전 대비 부하단 부품 수의 감소에 따른 신뢰성 향상 및 가격 저감, 무효전력 고려사항의 제거 등 많은 장점을 가지기 때문이다. 본 논문에서는 소용량 건물에 직류배전 구조가 도입될 경우 실현 가능성이 높은 대표적 직류 배전 구조들을 Functional Modeling 기법을 통해 모델링하며, 시뮬레이션을 통해 기존의 교류 배전 건물과 함께 각각의 전력계 구조에 대한 효율 및 장단점들을 정성적으로 비교하고, 구현에 필요한 고려사항들을 제시한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.