• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.233-239
• /
• 2007

현행 지적도에는 건물 위치가 표시되지 않아 지적도 활용 시 건물 위치 식별이 어렵고, 지적현황측량에 따른 비용과 시간의 소요와 불편을 격고 있으며, 지상 건물의 경계 침범으로 인한 분쟁과 소송이 일어나고 있다. 건축물 경계 추출에 관한 선행연구에서 수치정사사진과 LiDAR를 이용한 건물 경계를 추출은 원칙적으로 지적측량의 원리와 상이한 기준으로 실제 지상의 외벽 경계선이 아닌 건축물의 옥상층 경계선을 추출하였다. 따라서 본 연구에서는 건물등록을 위해 시도해 보지 않았던 건축도면을 이용하여, 기존연구에서 고려되지 못한 지붕선이나 처마선이 아닌 실제 지적측량에서 기준이 되는 외벽의 경계선을 등록하기 위해 건축도면을 활용하였으며, 등록하는 과정에서 ArcGIS 엔진을 이용하여 개발한 자동 등록 방법을 사용하였다. 지적도 필지 경계선과 건축도면의 필지 경계선을 기준으로 등록한 결과 지적현황측량 성과와 수치지역에서 연결오차로 RMSE가 0.10m, 도해지역에서 0.16m로 나타났다. 따라서 건축도면을 이용하여 지적도에 건축물의 경계를 등록함으로써 지상측량을 보완할 수 있으며, 3차원 지적구축을 위한 기반을 조성하고, 지적재조사사업에서 시간과 경비를 획기적으로 절감할 수 있을 것이다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.117-125
• /
• 2012

Although many studies have been conducted to extract buildings from airborne lidar data, most of them assume that all the boundaries of a building are straight line segments. This makes it difficult to model building boundaries containing curved segments correctly. This paper aims to model buildings containing curved segments as combination of straight lines and arcs. First, two sets of boundary points are extracted by adaptive convex hull algorithm and local convex hull algorithm with a larger radius. Then, arc segments are determined by average spacing of boundary points and intersection ratio of perpendicular lines. Finally, building boundary is modeled through regularization of least squares line or circle fitting. The experimental results showed that the proposed method can model the curved building boundaries as arc segments correctly by completeness of 69% and correctness of 100%. The approach will be utilized effectively to create automatically digital map that meets the conditions of the Korean digital mapping.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.315-317
• /
• 2008

본 연구에서는 리모델링 대상 백화점 건물의 내부를 지상레이져스캐너(z-f 레이저 장비)에 의해 3D 데이터를 취득하고 일련의 처리과정을 통하여 건물 내부의 리모델링 시공을 위한 단면자료 추출 과정 등에 대하여 제시하였다. 리모델링시공을 위해서는 건물내부에 대한 정확한 도면이 필요하며, 시공당시의 설계도면이 분실 또는 훼손되었든지 실제치수가 당초 설계와 다른 경우 복잡한 내부를 측량해야 하는데 이 경우 레이저 스캐닝 및 관련 소프트웨어에 의한 도면데이터 추출과정을 제시하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.151-159
• /
• 2013

The building information should be up-to-date information and propagated rapidly for urban modeling, terrain analysis, life information, navigational system, and location-based services(LBS), hence the most recent and updated data of the building information have been required of researchers. This paper presents the developed system to extract the 3-dimension spatial information from aerial orthoimage and LiDAR data of HSI color model. In particular, this paper presents the image processing algorithm to extract the outline of specific buildings and generate the building polygon from the image using HIS color model, recursive backtracking algorithm and the search maze algorithm. Also, this paper shows the effectivity of the HIS color model in the image segmentation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2011

Terrain, building location and area, and building shape information is in need of implementing 3D map. This paper proposes a method of extracting a building area by an improved semi-automatic snake algorithm. The method consists of 3-stage: pre-processing, initializing control points, and applying an improved snake algorithm. In the first stage, after transforming a satellite image to a gray image and detecting the approximate edge of the gray image, the method combines the gray image and the edge. In the second stage, the user looks for the center point of a building and the system sets the circular or rectangular initial control points by an procedural method. In the third stage, the enhanced snake algorithm extracts the building area. In particular, this paper sets the one tenn of the snake in a new way in order to use the proposed method for specializing building area extraction. Finally, this paper evaluated the performance of the proposed method using sky view satellite image and it showed that the matching percentage to the exact building area is 75%.

• The KIPS Transactions:PartB
• /
• v.16B no.6
• /
• pp.451-462
• /
• 2009

The spread of satellite image increases various services using it. Especially, 3D visualization services of the whole earth such as $Google\;Earth^{TM}$ and $Virtual\;Earth^{TM}$ or 3D GIS services for several cities provide realistic geometry information of buildings and terrain of wide areas. These service can be used in the various fields such as urban planning, improvement of roads, entertainment, military simulation and emergency response. The research about extracting the building and terrain information effectively from the high-resolution satellite image is required. In this paper, presents a system for effective extraction of the building model from a single high-resolution satellite image, after examine requirements for building model extraction. The proposed system utilizes geometric features of satellite image and the geometric relationship among the building, the shadow of the building, the positions of the sun and the satellite to minimize user interaction. Finally, after extracting the 3D building, the fact that effective extraction of the model from single high-resolution satellite will be show.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.5
• /
• pp.411-419
• /
• 2013

Research on developing algorithms for building modeling such as extracting outlines of the buildings and segmenting patches of the roofs using aerial images or LiDAR data are active. However, utilizing information from the building model is not well implemented yet. This study aims to propose a scheme for search identical or similar shape of buildings by utilizing graph topology pattern matching under the assumptions: (1) Buildings were modeled beforehand using imagery or LiDAR data, or (2) 3D building data from digital maps are available. Side walls, segmented roofs and footprints were represented as nodes, and relationships among the nodes were defined using graph topology. Topology graph database was generated and pattern matching was performed with buildings of various shapes. The results show that efficiency of the proposed method in terms of reliability of matching and database structure. In addition, flexibility in the search was achieved by altering conditions for the pattern matching. Furthermore, topology graph representation could be used as scale and rotation invariant shape descriptor.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.339-353
• /
• 2023

As the availability of high-resolution satellite imagery increases, improvement of positioning accuracy of satellite images is required. The importance of orthorectified images is also increasing, which removes relief displacement and establishes true localization of man-made structures. In this paper, we performed automated extraction of building rooftops and total building areas within original satellite images using the existing building height database. We relocated the rooftop sin their true position and generated an orthorectified building layer. The extracted total building areas were used to blank out building areas and generate true orthographic non-building layer. A final orthorectified image was provided by overlapping the building layer and non-building layer.We tested the proposed method with KOMPSAT-3 and KOMPSAT-3A satellite images and verified the results by overlapping with a digital topographical map. Test results showed that orthorectified building layers were generated with a position error of 0.4m.Through the proposed method, the feasibility of automated true orthoimage generation within dense urban areas was confirmed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.279-282
• /
• 2010

최근 단일 고해상도 위성영상과 건물과 지형에 대한 정보를 가지고 있는 수치지도(DEM:Digital Elevation Model)를 이용하여 3차원 영상으로 구축하는 연구가 많이 이루어지고 있다. 3차원영상을 구축하기 위해서는 건물과 지형의 위치, 크기, 형상에 관한 정보가 필요하나 위성영상만으로는 구하기가 어려워 수치지도를 활용한다. 본 논문에서는 수치지도를 이용하여 3차원 건물과 지형의 고도 정보를 추출하고, 위성영상과 Snake 모델을 이용하여 반자동으로 추가적인 건물 높이와 바닥면에 대한 정보를 추출하여, 3차원 영상을 생성 하는 방법을 제안한다.