• Spatial Information Research
• /
• v.12 no.2
• /
• pp.137-149
• /
• 2004

For 3D modelling artificial objects with computers, we have to draw frames and paint the facet images on each side. In this paper, a geographic modelling system building automatically 3D geographic spaces using GIS data and real images of buildings is proposed. First, the 3D model of terrain is constructed by using TIN and DEM algorithms. The images of buildings are acquired with a camera and its position is estimated using vertical lines of the image and the GIS data. The height of the building is computed with the image and the position of the camera, which used for making up the frames of buildings. The 3D model of the building is obtained by detecting the facet iamges of the building and texture mapping them on the 3D frame. The proposed geographical modeling system is applied to real area and shows its effectiveness.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.36-36
• /
• 2010

본 연구에서는 다이아그리드 구조시스템의 기술 현황 동향을 파악, 분석하고 향후발전과제를 제시하였다. 비정형 건물을 표현하기에 적합한 구조 시스템인 다이아그리드의 개념 및 원리를 설명하고 높이, 유형, 지역별로 건물 적용사례를 살펴보았다. 또한 국내의 연구 동향을 변수별로 정리하여 추가적인 연구개발 사항을 파악하고 이를 위한 구체적인 방안을 제시하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.471-475
• /
• 2004

LiDAR의 표고점 데이터에서 건물, 수목 등과 같이 주위보다 높은 고도 값을 가지는 대상물을 제거하여 DEM을 생성하기 위한 여러 가지 필터링 기법들이 개발되고 있으며 대표적인 필터링 방법으로는 분산을 이용한 linear prediction 기법, 주변 점들과의 경사관계를 이용한 slope-based 기법, morphology 필터, dual rank 필터 등이 있다. 이러한 기법들은 커널(kernel)의 크기를 대상 지역에 맞도록 사용자가 직접 지정해주어야 하고, 건물의 크기가 다양한 지역에 적용하기 위해서는 가변 크기(variable size)의 커널을 필요로 한다. 본 연구에서는 다양한 크기의 건물이 존재하는 지역에 대하여 커널의 크기를 변화시키지 않고 필터링을 수행하는 새로운 커널 연산 기법을 제안하였다. 또한 기존 필터링 기법에서는 커널에 의해 갱신된 연산값이 다음 연산에 반영되지 않으나 본 연구에서는 갱신된 값이 바로 다음 연산에 반영되도록 하였다. 건물과 수목 등을 제거하기 위하여 주변 화소와의 높이 차를 이용하였으며 대상물이 제거된 부분은 주변 화소를 이용하여 보간하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.279-282
• /
• 2010

최근 단일 고해상도 위성영상과 건물과 지형에 대한 정보를 가지고 있는 수치지도(DEM:Digital Elevation Model)를 이용하여 3차원 영상으로 구축하는 연구가 많이 이루어지고 있다. 3차원영상을 구축하기 위해서는 건물과 지형의 위치, 크기, 형상에 관한 정보가 필요하나 위성영상만으로는 구하기가 어려워 수치지도를 활용한다. 본 논문에서는 수치지도를 이용하여 3차원 건물과 지형의 고도 정보를 추출하고, 위성영상과 Snake 모델을 이용하여 반자동으로 추가적인 건물 높이와 바닥면에 대한 정보를 추출하여, 3차원 영상을 생성 하는 방법을 제안한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.421-429
• /
• 1999

It is estimated that, in the twenty-first century, 70％ of global citizens will live in urban areas. This accelerated urbanization will require a greater need for the building DEM and orthoimagery along with Geographic Information System for urban management. The building DEM requires the detection of outlines showing building shapes. To do this, automatic and semiautomatic building extractions are usually used. However, in cases where automatic extraction is performed directly from the aerial images, accurate building outline extraction is very difficult because of shadow, roof color, and neighboring trees making it hard to discern building roofs. To overcome this problem semiautomatic building extraction was suggested in this paper. When a roof texture was homogeneous, building outline detection was performed by mouse-clicking on a part of the roof. To construct the building outlines when the texture was not homogeneous, a computer program was developed to search out corner points by clicking spots near corner points. The building DEM was generated by taking into account building outlines and heights calculated by image matching.

• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.299-303
• /
• 2009

This study was conducted to increase the productivity and quality of C. auriculatum Royle ex Wight according to the various ridge height. The higher ridge height increased the vine length, leaf length, leaf width, leaf number, chlorophyll content, and leaf dry weight; however, the lower ridge height increased the stem diameter and branch numbers. The tuber number and length was increased at less than 20cm of ridge height, but the overall growth was retarded in the treatment of over 20cm ridge height. The tuber diameter was also thicker in the lower ridge. The rootlet ratio among the non-commercial tuber was increased in the 20cm and 30 cm ridge, and the decayed tuber ratio was increased in the lower ridge. The yield of tuber has increased with 3% and 11% in the 20cm and 30cm ridge height compared to 10cm ridge(515kg/10a).

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.973-985
• /
• 2019

In this paper, we propose a method to separate the ground and building areas and generate building models automatically through planarity analysis using UAV (Unmanned Aerial Vehicle) based point cloud. In this study, proposed method includes five steps. In the first step, the planes of the point cloud were extracted by analyzing the planarity of the input point cloud. In the second step, the extracted planes were analyzed to find a plane corresponding to the ground surface. Then, the points corresponding to the plane were removed from the point cloud. In the third step, we generate ortho-projected image from the point cloud ground surface removed. In the fourth step, the outline of each object was extracted from the ortho-projected image. Then, the non-building area was removed using the area, area / length ratio. Finally, the building's outer points were constructed using the building's ground height and the building's height. Then, 3D building models were created. In order to verify the proposed method, we used point clouds made using the UAV images. Through experiments, we confirmed that the 3D models of the building were generated automatically.

• Korean Journal of Remote Sensing
• /
• v.39 no.3
• /
• pp.339-353
• /
• 2023

As the availability of high-resolution satellite imagery increases, improvement of positioning accuracy of satellite images is required. The importance of orthorectified images is also increasing, which removes relief displacement and establishes true localization of man-made structures. In this paper, we performed automated extraction of building rooftops and total building areas within original satellite images using the existing building height database. We relocated the rooftop sin their true position and generated an orthorectified building layer. The extracted total building areas were used to blank out building areas and generate true orthographic non-building layer. A final orthorectified image was provided by overlapping the building layer and non-building layer.We tested the proposed method with KOMPSAT-3 and KOMPSAT-3A satellite images and verified the results by overlapping with a digital topographical map. Test results showed that orthorectified building layers were generated with a position error of 0.4m.Through the proposed method, the feasibility of automated true orthoimage generation within dense urban areas was confirmed.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.580-581
• /
• 2016

국제적으로 지속적인 이슈가 되고 있는 에너지 절감에 대한 대책으로 다양한 에너지 절감 기술들이 연구 개발되고 있다. 특히 전체 에너지 사용량의 약 20%이상을 차지하는 건물(가정/상업/공공)부문에서는 에너지 진단 및 분석을 수행하기 위해 건물 에너지 관리 시스템(BEMS: Building Energy Management System)과 건물 자동화 시스템(BAS: Building Automation System) 그리고 다양한 환경정보들을 수집하여 활용한다. 하지만 기존 분석 방식은 결과의 신뢰성에 최소한의 영향을 주면서 데이터 관리 효율을 높이는 방법에 초점을 맞춰 연구가 진행되었으며, 이를 위해 기존에 수집된 데이터를 압축하거나 샘플링하는 사전 정제 과정을 거치게 되었다. 하지만 빅데이터 플랫폼을 활용하면 더 이상 신뢰성을 낮추면서까지 데이터를 정제할 필요가 없어지고, 수집되는 모든 데이터에 대한 다차원 분석을 빠르게 수행할 수 있게 된다. 따라서 본 논문에서는 하드웨어의 한계로 기존 건물에너지 진단 및 분석 시스템에서 제공하지 못했던 다양한 분석 및 진단 서비스들을 빠르고 정확하게 제공하도록 하는 빅데이터 플랫폼 기반 건물 에너지 통합 관리 시스템 설계에 대해 서술한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.43-52
• /
• 2009

LIDAR data, as the source of the 3D information of buildings, are used many modeling fields such as three-dimensional city models in urban planning and the visibility analysis of buildings. This study suggests a methodology, that is characterized by combining image-based and point-based process, for minimizing the user's intervention and automatically extracting building boundary only using the LIDAR data. Image processing methodology is firstly used to separate building and non-building regions from LIDAR data. Moreover, building regions are then classified main roof into remaining parts by the statistical analysis of height values, and the remaining parts are processed separately. Through the experimental results of study areas which exist many types of buildings, for example, apartment-type, stair-type, complex-type, etc. Approximately 90% building boundaries are automatically extracted by the proposed methodology.