• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.135-141
• /
• 2000

This study aims to analyze stone's surface roughness measurement accuracy of a high resolution DCS 420 digital camera by digital close-range photogrammetric technique. For this purpose, the surface roughness measurement system was constructed by means of microsoft visual basic 6.0 in windows. As the analysis results of measurement accuracy of digital camera using this system, the roughness error of the normal distance between the best fitting reference surface obtained by least square method and sample points in the ideal plane or surface did not exceed $\pm$0.1 mm

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.247-260
• /
• 1999

It was found that surface roughness has a first-order effect on the interface shear strength and accordingly it should be accurately quantified if its role is to be properly understood. Most of the surface roughness parameters are based on the trisector approach (three dimensional parameter) which can provide a good measure of the surface roughness from a static perspective. However, if roughness is to be correlated with a directional sensitive parameter such as interface shear then a two dimensional parameter could be more meaningful if the roughness measurements are made parallel to the direction of shearing. In this paper, alternative roughness parameters which consider the direction of shearing are described. These directional parameters are compared with the existing roughness parameters, and the relationship between these directional and non-directional parameters are investigated. The surface roughness was quantified by using the Optical Profile Microscopy (OPM) method (Dove and Frost, 1996) based on the digital image analysis. The results showed that the various surface roughness parameters measured in this study exhibit similar trend of roughness values, so that, good relationships are obtained between these roughness parameters. As the surface roughness increases, the roughness values measured in trisector coupons are increasing higher than those measured in parallel coupons.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.243-248
• /
• 1998

본 논문은 촉각의 객관화를 위한 촉각 물리 요소의 측정 장치에 대하여 다루고 있다. 촉감을 대표할 수 있는 물량으로 표면 거칠기, 표면 마찰 계수, 컴플라이언스를 선정하였으며, 이를 측정할 수 있는 시스템을 제작하였다. 제작된 시스템을 실제의 측정에 적용해 보았으며, 측정 결과들로부터 본 시스템의 타당성을 검증할 수 있었다.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.717-724
• /
• 2023

Residual shear strength is an important parameter in landslide dynamics and may be considered the critical factor in landslide triggering. Tests were undertaken using Jumunjin sands to examine the effects of smooth and rough surfaces on ring-shear characteristics. Under dense and drained conditions, shear velocities were recorded as 0.01, 0.1, 1, 10, 50, 100 mm s^-1, with shear strength increasing with velocity and producing increasingly fine content. Particle fragmentation may thus increase landslide mobilization when the landslide body is mixed with ambient water in channelized flows.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.194-194
• /
• 2004

개인용 로봇의 촉각기능을 담당할 수 있는 유연성 기반 인공피부센서 시스템을 설계 및 제작하였다. 수직력을 측정할 수 있는 64 개의 FSR 센서(Techstorm Co.)와 전단력을 동시에 측정할 수 있는 1 개의 PVDF 필름(PSI Co.)을 융합하여 인공피부센서 시스템을 제작하였다 제작된 촉각센서는 10 cm x 10 cm 크기로 임의의 물체가 접촉할 경우 형상을 측정할 수 있으며 또한 물체표면의 거칠기 상태를 판단할 수 있다. 한편, 3축 로드셀 기반 평가 시스템을 제작하여 센서의 수직력을 평가하였으며 PVDF 필름을 통한 접촉하는 대상의 거칠기 평가는 주파수 분석으로 평가하였다.(중략)

• Science of Emotion and Sensibility
• /
• v.2 no.1
• /
• pp.105-111
• /
• 1999

In order to introduce the touch to engineering and industries, it must be preceded to dstablish a quantitative barometer of the feeling. for this purpose, we developed a tactile measuring system to measure physical properties of texture, such as surface roughness, friction coefficient and compliance. The tactile measuring system uses a LASER type displacement sensor, which is a non-contacting system, in measuring the surface roughness. By considering that human tactile system is a contacting mechanism, this non-contacting method needs to be modified. As a precedent research of that, we compared the contacting and non-contacting method in this paper. Surface roughness of ten cloths were measured by using the measuring system, then compared to the test results using the Kawabata evaluation system(KES), which uses a contacting method in measuring the surface roughness.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.815-818
• /
• 2014

영상 분석을 통한 특징 추출은 객체의 인식이나 매칭, 인덱싱 등을 위해 수반되는 준비 단계로서 분야별로 다양한 방식을 통해 수행되어 왔다. 특히, 피부 영상 분석에 있어 주목할 만한 이슈는 피부의 노화 정도를 측정하는 것이다. 피부의 거칠기는 피부의 상태와 노화를 판단하는 중요한 근거의 하나이다. 본 논문에서는 피부 나이를 측정하기 위해 피부 현미경 영상에서 피부 거칠기를 평가하는 방법을 제안한다. 이를 위해 피부 현미경으로 촬영된 이미지에 이진화 및 질감 대비 향상, 노이즈 제거 등의 전처리 과정을 수행하고, Watershed 알고리즘과 외곽선 검출을 통해, 피부를 구성하는 셀들의 영역 정보를 획득한다. 이를 바탕으로 피부 거침의 변화량을 계산하여 거칠기를 정의한다. 제안한 방법의 효과를 검증하기 위해 다양한 연령대의 피험자로부터 피부 현미경 영상을 확보하고 실험을 통해 피부 거칠기 특징이 피험자의 연령대와 상관관계가 있음을 보인다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.168-178
• /
• 1994

This paper presents an optical surface roughness sensor developed for intermediate- process measurement on the machine. The light scattering method is adopted for the sensor, which is designed conpact and flexible enough to apply to 'on the machine' measurement of surface roughness. The developed sensor has special features such that it makes use, as the measurement parameter, of the ratio between fluxes of the incident light, and the specularly and partly diffusely reflected light, and that it can adjust the incident light angle. The experimental investigation reveals not only the sensor has good performance as a surface roughness sensor but the sensor is very robust so as to be useful in in-process measurement.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.61-69
• /
• 1997

본 연구는 동심환형관에서 거칠기가 없이 매끈한 경우, 내측벽에 만, 외측벽에 만, 그리고 양측 모두에 거칠기가 있는 4경우에 대해 직경비가 0.26, 0.39, 그리고 0.56일 때 벽면에 설치된 거칠기 위치들이 난류유동장에 미치는 효과를 실험적으로 조사하고자 한다. 최대속도와 전단응력이 0인 지점들, 시간평균속도의 구배들, 그리고 와확산계수들을 X형 열선풍속계와 이중 피토튜브를 사용하여 측정하였다. 본 연구를 통하여 동심환형관에 설치된 거칠기들이 난류유동에 미치는 효과에 대한 정량적자료를 제시할 수 있었다.

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.186-196
• /
• 2007

In this study, direct shear tests were carried out on the 30 rock joint samples in order to investigate the influence of roughness and normal stress on the shear behaviour. Joint roughness profiles were measured by use of 3D laser profiler, and then the samples were equally classified into three individual groups according to the roughness index of rock joints. Peak shear strength, residual shear strength, shear stiffness, dilation angle of rock joints were investigated in condition of five different constant normal load. Peak shear strength was increased as roughness index was increased, and the influence of roughness on strength was found to be more considerable in case of lower normal stress condition. Residual shear strength and shear stiffness were increased as roughness index and normal stress were increased. Finally dilation angle was decreased as normal stress was increased, but it was increased as roughness index was increased in the same normal stress condition.