• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.308-315
• /
• 2018

In this paper, we present the basic design results for high-resolution radar development at S-band frequency that can precisely measure the miss distance between two targets. The basic system requirement is proposed for the design of a 3.5 GHz linear frequency-modulated (LFM) radar with maximum detection distance and distance resolution of 2 km and 1 m, respectively, and the specifications of each module are determined using the radar equation. Our calculations revealed a signal-to-noise ratio ${\geq}30dB$ with a bandwidth of 150 MHz, transmission power of 43 dBm for the power amplifier, gain of 26 dBi for the antenna, noise figure of 8 dB, and radar cross-section of $1m^2$ at a target distance of 2 km from the radar. Based on the calculation results and the theory and method of LFM radar design, the hardware was designed using software defined radar technology. The results of the subsequent field test are presented that prove that the designed radar system satisfies the requirements.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.29-38
• /
• 2013

This study is to construe the spatio-temporal characteristics of temperature in cities and the changes of climatical regions by analyzing a climate change in Korea peninsular. We used daily mean air temperature data which were collected in South and North climate stations for the past 34 years from 1974 to 2007. We created temperature maps of 500m resolution with Inverse Distance Weight in application with adiabatic lapse rate per month in linear relation with height and temperature. In the urbanization area, the data analyzed population in comparison with temperature changes by the year. The south climate region in Korea by the Warmth index was expanded to the middle climate region by the latitude after 1990s. A rise of mean temperature was $0.5{\sim}1.2^{\circ}C$ in urban areas such as Seoul, metropolitan and cities which had a rapid urbanization and industrialization with the population increase between 1980s and 1990s. In case of North Korea, cities such as Pyeongyang, Anju, Gaecheon, and Hesan had the same pattern.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.11a
• /
• pp.1-15
• /
• 1990

엔진 성능의 향상에 맞추고 에너지 절약을 위한 방법으로써 엔진 오일의 마찰 마모 특성등 오일의 성능을 높이려는 노력이 꾸준히 시도되고 있다. 특히 마찰력 손실을 감소기키기 위해서 낮은 마찰특성을 갖도록 몰리브데늄(Mo)을 유용성인 금속 착화합물로 만든 Mo-DTP를 제조하여 현재 첨가제로 널리 사용되는 Zn-DTP와 대체시키려는 연구가 활발하고 최근엠 많은 논문이 발표되고 있다. 또 일부 윤활유 제조 회사에서는 몰리브레늄을 첨가 시키는 등 제품 기술을 향상시켜 오일 교환의 기간이나 자동차 주행 거리를 대폭적으로 늘려줄 수 있는 상품도 생산되고 있다. 윤활 첨가제로써 Mo-DTP를 Zn-DTP와 대체시켜 기유에 혼합한 경우에는 마찰 감소 기능이 매우 향상 되었고 내 마모성도 비교적 좋으나 산화 억제 능력이 부족하고 온도의 상승에 따른 점도 지수의 증가도 비교적 크다는 단점을 갖고 있음이 발표된바 있다. 따라서 Mo-DTP의 단점을 보완하려는 연구가 필요되고 그의 한 방법으로써 현재 첨가제로 가장 많이 사용되는 Zn-DTP와 혼합하여 첨가 하였을 경우에 대한 연구를 하였다. 이때 기본 윤활유에 Mo-DTP와 Zn-DTP를 적당한 혼합 비율로 첨가하고 하중, 온도를 변화 시키면서 마찰, 마모등의 성질고 산화 안정성 및 마모 입자 분석 등 전반적인 윤활유로써의 특성을 살펴 보았다.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.338-347
• /
• 2017

This paper describes the design and fabrication of a high power amplifier which is a component of TDL(Tactical Data Link) aircraft terminal. We applied high-speed frequency hopping technology, cognitive radio technology, and receive filter bank technology to efficiently use limited frequency resources with radar and other communication equipment using the same frequency band. The high-power amplifier is physically composed of a transmitter, a receiver, a mechanical part, and a cable assembly, and is designed to meet temperature characteristics and electrical characteristics such as maximum transmission distance and reception sensitivity. Modeling and simulator were used to satisfy the requirement of high power amplifier. The transmit power and the noise figure were measured at 50.02dBm and 2.682dB, respectively. It was confirmed that all the required specifications were satisfied in the electrical characteristics test and the environmental characteristic test.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.360-369
• /
• 2012

Parent material, climate, topography, biological factors, and time are considered five soil forming factors. This study was conducted to elucidate the effects of several environment factors on soil distribution using quantitative analysis method, called soil series estimation algorithm in the soils of Jeju Island. We selected environment factors including mean temperature, annual precipitation, surface geology, altitude, slope, aspect, altitude difference within 1 $km^2$ area, topographic wetness index, distance from the shore, distance from the mountain peak, and landuse for a quantitative analysis. We analyzed the ranges of environment factors for each soil series and calculated probabilities of possible-soil series for certain locations using estimation algorithm. The algorithm can predicted exact soil series on the soil map with correctness of 33% on $1^{st}$ ranking, 62% within $2^{nd}$ ranking, 74% within $5^{th}$ ranking after estimating using randomly extracted environment factors. In predicted soil map, soil sequences of Entisols-Alfisols-Andisols on northern area and Alfisols-Ultisols-Andisols on western area can be suggested along increasing altitude. More modeling studies will be needed for the genesis process of soils in Jeju Island.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.562-572
• /
• 2011

This study is to examine the environmental characteristics of subpopulations of Ilex crenata var. microphyllla Max. distributed in the east-west slopes of Mt. Halla National Park based on analyzing the factors of environment, vegetation and soil. The result of the TWINSAPN analysis conducted on 56 study plots between the altitudes of 500 m and 1600 m of east-west slopes of Mt. Halla National Park can be divided into five communities-Prunus maximowiczii Rupr., Manshurian fullmoon Maple, Carpinus tschonoskii Max., Daphniphyllum macropodum Miq., Quercus serrata Thunb. ex Murray and Pinus thunbergil Parl. Among these communities, the plot with high importance percentage of the subpopulation of Ilex crenata var. microphyllla Max., is the Carpinus tschonoskii Max.-Daphniphyllum macropodum Miq. included in the altitude of 600m~1200m radius. The dominant species of the upper shrub layer was Carpinus tschonoskii Max.(I.P.: 29.82%) while the dominant species of the canopy layer was Daphniphyllum macropodum Miq.(I.P.: 26.76%). For the understory layer the dominant species was Ilex crenata var. microphyllla Max.. Species diversity index was on the low end with 0.7424, indicating the stably formed climax community of Carpinus tschonoskii Max.. The analysis of soil properties showed high concentrations of organic matters, available phosphate and Ca, Mg, the high importance percentage of the of Ilex crenata var. microphyllla Max. is found in altitude of 600m~800m on the eastern slope and the altitude of 800m~1,000m radius on the west slope. This region is included in the southern part of the cold/hot forest zone, its high importance percentage of Carpinus tschonoskii Max. and low in the species diversity index of 0.7424, and has formed stable climax community of Carpinus tschonoskii Max. in Mt. Halla.

• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.67-75
• /
• 2022

The purpose of this study is to present an appropriate management plan as a supplement to the scientific evidence of the currently operated distancing system for preventing COVID-19. The currently being used mathematical models are expressed as simultaneous ordinary differential equations, there is a problem in that it is difficult to use them for the management of entry and exit of small business owners. In order to supplement this point, in this paper, a method for quantitatively expressing the risk of infection by people who gather is presented in consideration of the allowable risk given to the gathering space, the basic infection reproduction index, and the risk reduction rate due to vaccination. A simple quantitative model was developed that manages the probability of infection in a probabilistic level according to a set of visitors by considering both the degree of infection risk according to the vaccination status (non-vaccinated, primary inoculation, and complete vaccination) and the epidemic status of the virus. In a given example using the model, the risk was reduced to 55% when 20% of non-vaccinated people were converted to full vaccination. It was suggested that management in terms of quarantine can obtain a greater effect than medical treatment. Based on this, a generalized model that can be applied to various situations in consideration of the type of vaccination and the degree of occurrence of confirmed cases was also presented. This model can be used to manage the total risk of people gathered at a certain space in a real time, by calculating individual risk according to the type of vaccine, the degree of inoculation, and the lapse of time after inoculation.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.295-305
• /
• 2001

This study was conducted to reveal stand structure and competition status by site types of natural deciduous forest in Pyungchang, Kangwon-do. The study site was divided by nine different types based on elevation(higher than 1,000m, 700~1,000m. lower than 700m) and topography(ridge, slope, valley). The objective of this study is to provide a basic information necessary for the environment-friendly management methods of natural deciduous forest on the basis of the stand structure and competition status by site types. It is confirmed that the range from 700m to 1,000m in elevation was the most suitable for stand growth. Species diversity and richness index also tended to be increased as elevation decreased. The ridge was the best in terms of stand growth by topography and followed by slope and valley in order. In addition, as expected, species with high importance value showed relatively low evenness index. The distance-independent competition index was selected as the best competition index model in seven site types of natural deciduous forest. On the other hand, the distance-dependent competition index was highly correlated with periodic annual increment of diameter in both ridge at higher than 1,000m and valley of 700m to 1,000m in elevation. It is proved, as a result, that the best competition index model is somewhat different by site types. From the analysis growth characteristics and competition status by site types, it is identified that the species with high importance value performed well in both growth and competition. The growth of Q. mongolica was excellent in the areas of higher elevation than 700m. Although K. pilus had relatively low importance value in higher elevation than 1,000m and ridge of 700m to 1,000m, the species had stronger competition status rather than other species. Also, U. davidiana and M. amurensis were good in competition status at lower elevation than 1,000m. It is necessary, therefore, that appropriate tending practice should be adopted based on the growth pattern and competition status of each species distributed by site types.

• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.407-420
• /
• 2009

In this study geostatistical technique using indicator kriging was performed to evaluate the optimal rock mass classification by integrating the various geophysical information such as borehole data and geophysical data. To get the optimal kriging result, it is necessary to devise the suitable technique to integrate the hard (borehole) and soft (geophysical) data effectively. Also, the model parameters of the variogram must be determined as a priori procedure. Iterative non-linear inversion method was implemented to determine the model parameters of theoretical variogram. To verify the algorithm, behaviour of object function and precision of convergence were investigated, revealing that gradient of the range is extremely small. This algorithm for the field data was applied to a mountainous area planned for a large-scale tunneling construction. As for a soft data, resistivity information from AMT survey is incorporated with RMR information from borehole data, a sort of hard data. Finally, RMR profiles were constructed and attempted to be interpreted at the tunnel elevation and the upper 1D level.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.558-564
• /
• 2001

For the study of morphological variation in winter buds of Q. variabilis $B_L$. natural populations in Korea, 16 populations were selected through the country in consideration of latitude, longitude, altitude, and geographical characters. Thirty trees were randomly selected from each population and 30 terminal and 30 lateral buds were sampled below 1/3 crown length of each tree. Four morphological characters including length and width of terminal and lateral buds were measured. 1. Length and width of terminal and lateral buds were in the ranges 6.9~11.3cm, 3.0~3.7cm, 6.1~8.9cm, and 2.5~3.1cm, respectively. The coefficient of variation were in about 20% in all the characters investigated. 2. All the characters were significantly different among populations as well as among individuals within populations. The degree of contribution of variance among individuals within populations was higher than that among populations. 3. Length of terminal bud showed positive correlation with length and width of lateral bud; and width of lateral bud with width of terminal bud and length of lateral bud. Also, positive correlations were observed between longitude and width of terminal bud, between latitude and length of terminal and lateral bud. 4. Cluster analysis using complete linkage method for winter bud characters showed two groups to Euclidean distance 3.4. They were group I of population 8 and group II of populations 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, and 16. However, group II was divided into two at Euclidean distance 1.5 that are a group including populations 1, 2, 7, 9, and 11(groupII-1) and the other group including populations 3, 4, 5, 6, 10, 12, 13, 14, 15, and 16(groupII-2).