• Electronics and Telecommunications Trends
• /
• v.18 no.5 s.83
• /
• pp.27-36
• /
• 2003

본 논문은 SDR Forum에서 SDR용 모바일 플랫폼 구성을 위한 소프트웨어의 표준으로 인정된 차세대 개방형 소프트웨어 프레임워크인 SCA의 구조에 대해 기술한다. SCA 소프트웨어 프레임워크는 궁극적으로 단일 모바일 플랫폼 환경에서 하드웨어의 변경 없이 무선으로 다운로드한 소프트웨어의 동작으로 다양한 무선 접속환경을 구성할 수 있도록 하는 내장형 시스템 소프트웨어들의 표준을 추구한다. SCA는 분산 객체 모델의 표준인 CORBA Middleware와 더불어 다중 무선접속 응용프로그램을 구성하기 위하여 컴포넌트 구성물의 수행을 뒷받침하는 개방형 소프트웨어 구조로서 크게 RTOS, CORBA Middleware, CF, Portable Software Resource로 이루어진다. 본 고에서는 SCA 소프트웨어 프레임워크의 기본 구조와 기능들을 최신 표준 동향을 기반으로 분석하고, 개발 사례에 대해서도 간단히 소개한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.819-825
• /
• 2009

An open frame structure is fastened by bolt joints for strength and shock attenuation. Therefore the full finite element model of an open frame structure should be properly modeled including bolt joints for strength analysis of the frames and joint assemblies which are operated under multi-loading conditions such as driving, drop, inertia and torsional loads. Then the joints and frames must satisfy the specified allowable strength constraints. Because the full finite element model has a large number of elements to perform strength analysis, a detailed fine bolt analysis seems to be very expensive. Therefore bolts of the full finite element model are approximately modeled by coupling method to constrain degree of freedoms between adjacent nodes. However, the coupling method can exaggerate stress results at the constrained nodes. Thus a detailed bolt analysis and a theoretical/experiential formula of bolts for a worst bolt joint are performed using reaction force applied both bolt and bolt joint. Finally, the results from the two methods are compared and discussed to verify the safety of the open frame structure.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.523-528
• /
• 2008

An open frame structure is fastened by bolt joints for strength and shock attenuation. Therefore the full finite element model of an open frame structure should be properly modeled including bolt joints for strength analysis of the frames and joint assemblies which are operated under multi-loading conditions such as driving, drop, inertia and torsional loads. Then the joints and frames must satisfy the specified allowable strength constraints. Because the full finite element model has a large number of elements to perform strength analysis, a detailed fine bolt analysis seems to be very expensive. Therefore bolts of the full finite element model are approximately modeled by constraints equations to constrain degree of freedoms between adjacent nodes. However, the constraints equation method can exaggerate stress results at the constrained nodes. Thus a detailed bolt analysis and a theoretical/experiential formula of bolts for a worst bolt joint are performed using reaction force applied both bolt and bolt joint. Finally, the results from the two methods are compared and discussed to verify the safety of the open frame structure.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.519-521
• /
• 2000

최근전산 환경은 통합되는 개방형 시스템으로 변모하고 있는데, 클래스 라이브러리의 재사용이 재사용을 향상시키지 못하고 있다. 이로 인한 라이브러리 습득에 많은 시간과 노력이 가중되고 개발시간이 길어진다. 따라서, 본 논문에서는 객체지향 프레임워크를 잘 사용하여 재사용할 수 있도록 잘 관리하는 저장소를 제안한다. 객체지향 소프트웨어 공학 프로세스에 의해 생성되는 산출물을 객체 형태로 통합 관리함으로서 프레임워크 재사용을 쉽게 할 수 있고, 객체들을 효율적으로 관리해 주고, 특정한 도메인에서 프레임워크를 재사용하여 새로운 어플리케이션을 개발할 때 시간을 단축하기 위해서 통합 객체 관리 저장소를 제안한다. 이 모델은 프레임워크 클래스 계층 구조 및 클래스 상호간의 상호작용 정보를 유기적으로 관리하고 통합할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.69-77
• /
• 2017

By producing pre-engineered modular system in the factory, It is enable to expedite construction and can be distinguished from two types by the method resisting load. One is the open-sided modular system composed of beams and columns. The other is enclosed modular system composed of panels and studs. Of the modular systems, the open-sided modular system buildings the connection between modules are difficult due to closed member sections, and the overall strength is reduced as a result of local buckling. In this study, in order to solve these problems, a modular system with folded steel members filled with concrete are proposed. The capacity spectrum method presented in ATC 40 is used for seismic performance assessment of the proposed model structure and the structure with conventional steel members. The analysis results show that at the performance point of each model the number and rotation of plastic hinge formed in the proposed modular system are smaller than those in the conventional system. Based on this observation it is concluded that the proposed system with composite sections has superior seismic capacity compared with conventional system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.100-102
• /
• 2011

스마트폰의 급속한 확산으로 모바일 디바이스를 위한 개방형 플랫폼인 안드로이드의 시장 점유율이 지속적으로 증가하고 있다. 안드로이드는 미디어 프레임워크, 카메라, Wi-Fi, GPS 등에 필요한 하위 하드웨어 드라이버만 개발하면 보다 상위 계층은 기본적으로 제공되는 라이브러리와 프레임워크를 기반으로 짧은 시간 내에 어플리케이션 개발이 가능하다. 본 논문에서는 스마트폰의 주요 서비스인 모바일 방송 어플리케이션 개발을 위한 시스템을 제안한다. 제안한 시스템은 안드로이드 소프트웨어의 계층적 스택 구조로 되어 있으며, 이를 활용한 차세대 모바일 방송 규격인 AT-DMB 수신기를 설계 및 구현하였다. 또한, 연구개발 결과물의 수신 기능을 검증하였다.

• The Journal of Society for e-Business Studies
• /
• v.11 no.2
• /
• pp.71-91
• /
• 2006

Nowadays most enterprise want to organize all Information Technology elements for their vision and mission accomplishments by integration view Enterprise architecture is used by the solution. But IT is so more complex that it can't cover application development. This research defines software architecture framework by enterprise view and designs enterprise architecture framework for embracing application development. Software architecture framework consists of meta architecture, conceptual architecture, logical architecture, physical architecture. For enterprise architecture framework including enterprise software architecture framework, this research analyzes its perspectives and Views. After all, This research able to apply to systematic application development based on enterprise architecture and completely IT elements organization by enterprise view.