• Communications of Mathematical Education
• /
• v.11
• /
• pp.259-277
• /
• 2001

본 연구는 개방형 문제를 활용한 평가가 수학적 창의력에 미치는 효과를 분석함으로써 수학적 창의력을 신장시킬 수 있는 평가 방법을 찾는데 그 목적이 있다. 이를 위해 대구광역시 소재의 C중학교 2학년 1개반과 S중학교 2학년 1개반을 임의로 선정하여 한 반은 개방형 문제를 활용한 평가 집단으로 하고 다른 한 반은 전통적 평가 집단으로 무선 할당하여 실험연구를 실시하였다. 실험처치는 두 집단에게 서로 다른 유형의 평가를 실시하는 것으로, 실험집단은 개방형 문제를 평가과제로 하여 실험집단 담임 교사가 평가를 실시하였으며, 비교집단은 객관식 및 주관식 단답형 문제를 평가과제로 하여 비교집단 담임교사가 전통적인 평가를 실시하였다. 본 연구에서 사용한 검사도구는 수학적 창의력 검사로 사전 사후검사 모두 같은 검사지를 사용하였다. 사후 수학적 창의력 검사의 평균의 차를 t-검정한 결과 유의도p=.025(p < .05)로 실험집단과 비교집단 사이에는 통계적으로 유의미한 차가 있는 것으로 나타났다. 수학적 창의력의 각 요소별로 차이가 있는지 알아보기 위해 사후 창의력 검사의 각 요소별로 평균의 차를 t-검정한 결과, 유창성과 융통성은 각각 유의도 p=.030, p=.040으로 p < .05 수준에서 통계적으로 유의미한 차이가 있었으며, 독창성은 유의도 p=.052로 p < .1 수준에서 통계적으로 유의미한 차이를 보였다. 연구결과 개방형 문제를 활용한 평가가 전통적 평가보다 수학적 창의력 향상에 더 효과적이며, 수학적 창의력의 세 가지 요소(유창성, 융통성, 독창성)의 향상에도 효과적인 것으로 나타났다. 결론적으로 개방형 문제를 활용한 평가가 수학적 창의력 신장에 효과적인 방법임을 시사한다.질공학적 특성의 위도별, 깊이별 변화는 탄산질 퇴적물과 규질 퇴적물의 분포, 수층의 생산성 및 수심변화에 따른 용해도와 퇴적을 차이 그리고 침식 및 재퇴적작용 등 퇴적 과정이 위도별로 달랐기 때문으로 판단된다.haetoceros resting spores/Chaetoceroe vegetative cells도 80 cm 보다 상층에서는 높게 나타나 규조온도지수 분포와도 일치하는 경향을 보인다. 이상의 규조군집 분석 결과에 의하면, 홀로세의 후빙기동안 본 연구 지역인 동해 북동부에는 대마 난류의 유입이후 현재와 유사한 환경이 우세하게 발달했으나, 난류종 P. doliolus의 변화는 동해내에서 대마난류의 세기가 반복되었음을 지시하고 있다./3 수준으로 높다. 결론적으로 풍부한 화학물질들을 함유한 제주해류는 남해 및 동해의 생지화학적 과정들에 있어 상당히 중요함을 시사한다.다. 수조 상층수 중 Cu, Cd, As 농도는 모든 FW, SW수조에서 시간이 지남에 따라 일관성 있게 감소하였고, 제거속도는 Cu가 다른 원소에 비해 빨랐다. 제거속도는 FW 3개 수조 중 FW5&6에서 세 원소 모두 가장 느렸고, SW 3개 수조 중에서는 SW1&2에서 가장 빨랐다. SW와 FW간 제거속도 차이는 세 원소 모두 명확치 않았다 Cr은 FW에서 전반적으로 감소하는 경향을 보였지만 SW에서는 실험 초기에 감소하다 24시간 이후에는 증가 후 일정한 양상을 보였다. Pb은 FW에서 전반적으로 감소했지만 SW에서는 초기에 급격히 증가 후 다시 급격히 감소하는 양상을 보였다 Pb 또한 Cu, Cd, As와 마찬가지로 SW1&2에서 제거속도가 가장 빠르게 나타났다. FW 상층수 중 Hg는 시간에 따라 급격히 감소했고,

• Transactions of the KSME C: Technology and Education
• /
• v.5 no.2
• /
• pp.135-143
• /
• 2017

The domestic unique research reactor, HANARO (Hi-flux Advanced Neutron Application ReactOr), has been constructed with the open-pool, the core is submerged in, for the multi-purpose neutron application. The reactor has a primary cooling system to remove the fission heat from the core and its connected fluidic systems. Since the works are required at the reactor pool top as a characteristic of the research reactor, the radiation shall be minimized with the operation of the hot water layer system to avoid unnecessary radiation exposure on the workers during work at the pool top. Moreover, the pool water management system is connected to the reactor pool to maintain the pool temperature below $50^{\circ}C$ to minimize the uprising radioactive gas or impurity from the colder pool bottom. For the efficient flow rate of the PWMS, the thermal capacity of heat exchanger is selected with 260 kW in the normal operation condition. In this paper, the modeling is formulated to figure out whether or not each pool temperature maintains below the temperature limit and the calculation results show that the designed PWMS heat exchanger has enough capacity with the design margin regardless of the reactor operation mode.

• Journal of Conservation Science
• /
• v.24
• /
• pp.1-11
• /
• 2008

The Unhyungung Water Container in the possession of the Seoul Museum of History in Korea is consisted of a calcareous marble developed laminated bedding and numerous argillaceous veinlets. This monument should need to conservation treatment because of black discoloration and seriously numerous cracks. Vertical and horizontal cracks in the monument are developed following stratification and argillaceous veinlets that are relatively low coherence between the rock materials. We have proved that the material inducing discoloration on the surface is carbon which is formed by deposited organic matters. As the result of the ultrasonic measurements, although highly surface weathering degree, the physical properties of the Unhyungung Water Container is confirmed slightly weathered state. The depths of cracks in the monument are calculated at maximum 60mm in some cracks completely penetrating into the wall and at minimum 9mm in the other crack. The cracks, developed following veinlet, are revealed that there penetrate from an outer wall to an inside wall for the monument. And most depths of cracks, developed following stratification, are calculated 20 to 30mm. This result will offer a significant data for conservation of the Unhyungung Water Container.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.867-873
• /
• 1995

개방수조형 연구로인 하나로에서 가상적인 채널유동 차단사고에 따른 방사능 방출시의 환경영향을 부지 기상자료 측정결과를 이용하여 고공방출과 지표 면방출의 두가지 경로에 대해 평가하였다. 계산 결과, 지표면방출이 고공방출보다 피폭선량이 크게 나타났으나, 두 경우 모두 제한구역(EAB) 및 저인구지역(LPZ) 경계에서의 피폭선량 허용기준치를 만족하였다. 그리고 비상계획구역은 800 m로 설정하면 적절함을 입증하였다.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2013

In this study, the hydraulic experiments were conducted for the dredging efficiency of the cutter head type, which includes the open type and the close type cutter head. The dredging experimental instrument was installed in the large water tank which has the dimension of $4.9m(L){\times}2.2m(W){\times}1.5m(H)$. The dredging experiments were performed for the various conditions of dredging depth, rotating speed, and suction speed of the cutter head. As the results, the dredging efficiency of the close-type cutter head is much higher than that of the open-type cutter head. The dredging efficiency of the same cutter head type was mainly influenced by the rotating speed of cutter head. Also the adequate suction speed of the cutter head is needed for more effective dredging.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.117-123
• /
• 2015

To remove heat generated during a burn-up test of nuclear fuels, the heat generation rate of nuclear fuels should be calculated accurately, and a coolant should be circulated in the test loop at an adequate flow rate. HANARO is an open pool-type reactor with an independent test loop for the burn-up test of nuclear fuels. A test rig is installed in the test loop, and a coolant is circulated through the test loop to maintain the temperature of the nuclear fuel rods within a desired temperature during an irradiation test. The components and sensors in the test rig can be broken or malfunction owing to the flow-induced vibration. In this study, a coolant flow simulation system was developed to verify and confirm the soundness of components and sensors assembled in the test rig with a high flow rate of the coolant.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.10
• /
• pp.69-77
• /
• 2012

Clogging of drainage pipes by scale is an important problem in civil engineering works. Although scale deposits can be removed by acid treatment or water jetting, these treatments are costly and have many disadvantages. In this study, scale samples from tunnel drainage pipes were analyzed using SEM-EDS and XRD. The main ingredient in scale was $CaCO_3$ of the calcite crystal form. Drainage experiments and recirculation type experiments were conducted to control and remove scale deposits, which were determined through visual and weight measuring analysis. As a result, Quantum Stick has the effect of limiting formation of scale.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.935-941
• /
• 2010

HANARO is an open-tank-in-pool-type Korean research reactor that generates 30MW of thermal power. It differs from power plant reactor in that the heat generated by HANARO is exhausted into the atmosphere through a secondary cooling tower, thus maintaining the core temperature constant. During every monthly inspection of the cooling tower, large vibrations that exceeded the permissible limit were observed at cooling fan gear reducer No. 4 of the cooling tower. The purpose of this study is to identify the origin of the large vibration and to repair it. FFT spectrum analysis is performed to identify the part that caused the large vibration. The results of the frequency analysis showed that the vibration frequency was 354 Hz, which is twice the natural frequency of the pinion gear. A check of the pinion gear revealed that there was a crack on the surface of the pinion gear. After the gear was replaced, the reducer operated normally.