• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.465-470
• /
• 2007

This paper is designed and producted the microstrip patch antenna which used aperture coupled feed structure, and had a comparatively hish gain and headband characteristic with a PCS substitution repeater antenna. The proposed antenna transformed a coupled slot into a H-type in order to improve a characteristic of a general aperture coupled feed antenna. It is this H-type form slot reduces back lobe from the antenna backside at the same time that a coupling between a power feed and patches is iccreased, and to have maximized a gain of an antenna. As a result of having measured the antenna which the VSWR was 1.5 or below and tied up the gain than 7.5dBi in the $1750{\sim}1870$[MHz] that was a PCS substitution, and a beamwidth became in $80^{\circ}$ and radio waves shadow was local, but accomplishment did PCS mobile communication service in building me smoothly, but confirmed what practical use can become.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.45-54
• /
• 2006

The study was to review methods by which a ship can unfold and tow an oil boom by attaching the opening apparatus to an oil boom through experiments. The shape and dimension of the opening apparatus were designed with the measurement value of the towing tension load of the oil boom and the dimension of winch drum of the oil boom installed in the ship considered. For the field experiment to identify the performance of the opening apparatus, opening apparatuses were prepared to have the dimension of $3.0m^2$ and $6.0m^2$ which is 91% and 75% of the calculation value for type B and C respectively. As a result, T(kg), the value of tension in type B oil boom according to the towing speed(v) change when two ships are towed together were proved to be $T=920v^{1.1}\;and\;T=500v^{0.9}$ in case the distance is 100 m and 50 m. Based on the result, the dimension of the opening apparatus for type B and C oil boom was calculated as $3.3m^2$ and $8.0m^2$ respectively. When unfolding and towing by attaching the opening apparatus and 200 m of towing line at both ends of type B and type C oil boom, the maximum width of the opening apparatus was shown as 114 m and 95 m in average(width of opening/total length of oil boom: 33% and 57%) in the towing speed of 1.5 kt. It was evaluated that the opening apparatus could concentrate the spilled oil in a good performance. However as far as the increase rate of oil boom opening width according to the length of the towing line is debatable, the increase rate is remarkably reduced when it is lengthened from 100 m to 150 m and to 200 m although it showed extreme increase of 31% and 40% when the length of the towing line was changed from 50 m to 100 m. Therefore, it is inferred that the towing line should be maintained more or less 100 m to get good spread efficiency of the opening apparatus. Additionally, if the towing speed is faster than 1.5 kt, the opening width was narrowed because of the reduced spread efficiency and the shape of the oil boom can be unstable because of the partial sinking of the oil boom, run over waves, or flap of skirt. Thus the reasonable towing speed can be within 1.5 kt for the operation of the opening apparatus.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.149-158
• /
• 2004

In this study, deep beam specimens are designed to have the effective shear span to depth ratio 1.0 and web opening within effective shear region. The purpose of this study is to investigate experimentally the shear strengthening effect between before failure and after failure upon using fiber sheets for RC deep beam with opening in web. The results can be summarized as follows; 1)When deep beams with web opening were failed in shear, their initial diagonal crack load and crack width were not influenced by their types of the arranged steel bars. 2)Deep beam with the horizontal reinforced bar was effective in the ultimate load of deep beam with web opening in shear failure 3)There were the approximate values between the experimental values and the analysis of finite element method. 4)The ultimate failure strengths of the repaired and strengthened specimens were increased about 34.4%~83.8% in comparison with specimens not to be strengthened.

• Water for future
• /
• v.28 no.1
• /
• pp.145-152
• /
• 1995

This paper presents an experimental study on the Cherepnov water lifter that can pump or lift water without the use of external energy such as electricity. The energy used by the lifter is derived from the potential energy of the water itself. The liffter consists of three interconnected tanks, one of which is open and two others are hermetically sealed. The water level and the pressure in each tank were measured to improve the undestanding of the behavior and the operational charateristics of the lifter. The effects of varying operating parameters such as the inflow rate, tank and pipe sizes, the relative positions of the tanks were analyzed. As a results, factors that can maximize the efficiency, shorten the cycle time and increase the delivery rate were identified.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.87-97
• /
• 2007

오늘날 항공기 설계와 제작은 다국적인 산업의 형태로 이루어지고 있다. 즉 항공기 서브시스템은 세계 각국에서 독립적으로 설계, 제작 및 시험한 후 한 곳으로 납품되어 조립 제작되는 데 이 때 중요한 것이 표준화이다. 항공전자장비의 낙뢰 간접영향에 대한 인증의 경우 RTCA DO-160E, Section 22 Lightning Induced Transient Susceptibility(낙뢰 유도 과도현상 적응성)로 표준화 되어 있다. 이 Section 22는 낙뢰 간접영향에 대한 항공전자장비 단위 즉, LRU (Line Replaceable Units)와 같은 부품단위의 시험 요건을 규정하고 있으며 이 규격은 현재 전 세계적으로 통용이 되고 있다. 1980년대 초 상용 수송기에 디지털 "Fly by Wire" 비행 시스템과 엔진제어시스템(EEC, Electronic Engine Control)의 도입 이후, 항공기 시스템이 낙뢰 환경에서 운용시 신뢰성을 보증할 필요성이 대두되었다. 데이터 처리를 통하여 제어되는 각종 항공전자장비에는 다중타격(MS)과 다중파열(MB) 기법에 의한 시험 사항이 최근 추가 되었다. 실제 낙뢰 환경과 유사한 시험실 모사를 위해 계속적인 연구가 진행 중이며 신규 시험 규격서가 새로이 출간되고 있다.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.87-93
• /
• 2010

The objective of this study is to verify the safety in case of fire and change of residential environment for different wall construction approaches in a stairways apartment house. In order to confirm that case_1, which is current case that most of wall is opened and the case 2, which upper part of wall is limitedly opened are compared and analyzed based on simulations of fire, escape and natural ventilation performance. The analysis reveals that possible escape time for case 1 was more than 600 seconds and for case 2 was 195 seconds. Since the escape times for both cases were over 128 seconds, it would be reasonable to assume that every resident would escape. The simulation results on natural ventilation performance shows the air change per hour of case 1 and case 2 were .19n/h and .16n/h and there was 1.2 times difference. However, the difference was too insignificant and it could be seen as that different approaches on wall construction would not significantly influence on natural ventilation performance.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.329-336
• /
• 2003

The box system that is composed only of reinforced concrete walls and slabs are adopted on many high-rise apartment buildings recently constructed in Korea. And the framed structure with shear wall core that can effectively resist horizontal forces is frequently adopted for the structural system for high-rise building structures. In these structures, a shear wall may have one or more openings for functional reasons. It is necessary to use subdivided finite elements for accurate analysis of the shear wall with openings. But it would take significant amount of computational time and memory if the entire building structure is subdivided into a finer mesh. An efficient analysis method that can be used regardless of the number, size and location of openings is proposed in this study. The analysis method uses super element, substructure, matrix condensation technique and fictitious beam technique. Three-dimensional analyses of the box system and the framed structure with shear wall core having various types of openings were peformed to verify the efficiency of the proposed method. It was confirmed that the proposed method have outstanding accuracy with drastically reduced time and computer memory from the analyses of example structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.568-573
• /
• 2019

Modern Radars are evolving into MFRs which can search multiple targets simultaneously and then track them. Additionally they should be able to avoid some external jamming signals. Applying to these MFRs, Antennas should be able to perform DBF including to not only real-time beam steering but also multi-beam forming simultaneously. And they can cancel the beam at the specific direction. In this paper, we describe the implementation of sub-array type antenna hardware which can be applying DBF. Also we propose the modified amplitude aperture distribution for suppressing the side lobe level and explain the sub-array receiver design with amplitude tapering. It consists in making the amplitude weighting in 2 steps. In order to compare two weighting cases, we investigate the G/T performance for the array antenna. At the conclusion, we make a comparative study for the dynamic range of every sub-array receiver and present the hardware implementation that is more advantageous for sub-array alignment and calibration in DBF.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.51-56
• /
• 2001

Changes of gill tissue and body composition of grey mullet (Mugil cephalus) and Nile tilapia (Oreochromis niloticus) by the manipulation of salinity were observed in a recirculating rearing system. Salinity was increased from $0\%_{\circ}$ to $33\%_{\circ}$for 1 day and remained far 15days, thereafter salinity was decreased from $33\%_{\circ}$ to $0\%_{\circ{$ for 1 day and remained for other 15 days. Any morphological differences of gill lamella in grey mullet were not observed in seawater and freshwater. However, on day 2 in exposure to seawater, Nile tilapia showed the edema and bloodclot in gill lamella. In the case of grey mullet, mitochondria and tubular system of chloride cell were more densely packed according to the salinity increase. The whole body of grey mullet showed no significant differences in moisture content during experimental period. However, moisture content in whole body of the Nile tilapia was signincantly decreased when exposed to seawater. Protein content in whole body of grey mullet showed no significant difference between beginning and day 15 of the experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.9-20
• /
• 2019

The number of natural disasters in Korea, such as earthquakes, is increasing. As a result, there is growing need for temporary residences or shelters for disaster conditions. The aim of this study was to produce post-disaster refugees housing differentiated from existing shelters using lightweight composite panels. To accomplish this, the structural performance of lightweight composite panels was validated, and an in-plane shear strength test was conducted according to the ASTM E72 criteria among the performance test methods for panels. As a result of the experiment, the maximum load for each specimen under an in-plane shear load was determined. All the experiments ended with the tear of the panel's skin section. The initial stiffness of the specimens was consistent with that predicted by the calculations. On the other hand, local crushing and tearing, as well as the characteristics of the panel, resulted in a decrease in stiffness and final failure. Specimens with an opening showed a difference in stiffness and strength from the basic experiment. The maximum load and the effective area were found to be proportional. Through this process, the allowable shear stress of the specimens was calculated and the average allowable shear stress was determined. The average ultimate shear stress of the lightweight composite panels was found to be $0.047N/mm^2$, which provides a criterion of judgement that could be used to expect the allowable load of lightweight composite panels.