• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.78-84
• /
• 2017

Compared to other types of power, hydraulic energy is the most commonly used for heavy vehicles and ships because it has fewer location and space constraints, and its controllability can be maintained even under adverse conditions. Operators have controlled a main control valve of ship winches by pushing or pulling the lever, which is directly connected to the spool. However, because of the spatial arrangement, the importance of remote control valves has emerged. In this paper, experiments of the hysteresis characteristics were performed by analyzing the remote-control valve using a valve tester and RA2300. The validity was verified by comparing with the analytical model using SimulationX as the hydraulic analysis program. This study examined the effects of the spool's notch (Non, End-mill, and Spherical) and the effects of stiffness and pre-load of the spool spring on Spool stroke, open area, and hysteresis characteristics. It is considered possible to reduce the cost and the, trial and error process in designing remote-control valves in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1092-1100
• /
• 2004

This paper presents the effect of opening configuration on the thermal behavior and air pattern of earth tube system. The earth tube system is a fresh air load reduction system by using underground double floor space for air-conditioning. In order to analyze the effect of opening configuration on thermal performance of this system and air pattern in underground double floor space quantitatively, we used a model dealing with tree-dimensional profile of wind velocity and temperature in underground double floor space. In conclusion, it is confirmed that heat exchange of a fresh air is mainly performed with upper and lower wall in underground double floor space, and that heat exchange area increased by installing the opening near the wall.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.61-66
• /
• 2008

It is important to calculate the exact crack opening area in the cracked pipe subjected to axial force and bending moment. Among many solutions for obtaining the crack opening displacement, Paris-Tada's expression, which is derived from energy method, is open used in fracture analysis for piping crack problems because of its simplicity. But Paris-Tada's equation has conservativeness when radius over thickness ratio(R/t) is ten or less, for it is based on the stress intensity factor solution having a compliance function derived from a simple shell theory. In this paper we derived a new expression using a different stress intensity factor solution which is able to consider the variation of compliance through wall thickness in a cracked pipe. Conservativeness of both equations was examined and compared to finite element analysis results. Conservativeness of the new equation is decreased when R/t > 10 and increased slightly when R/t < 10 compared with Paris-Tada's. But Both equations were highly conservative when R/t < 10 compared with finite element analysis results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.384-384
• /
• 2018

최근 기상이변의 가속화로 인해 홍수피해는 더욱 증가되고 있으며, 도시화로 인해 불투수면적이 급격히 늘어남에 따라 기존 관개수로의 통수능력 부족으로 도시침수피해가 증가되고 있다. 재난 연감과 재해연보를 바탕으로 비교한 결과, 홍수를 비롯한 각종 재난 발생 시 일반적으로 남성들에 비해 여성들의 피해자 수가 많으며 피해의 정도는 상대적으로 심각하였다. 그러나 국내외적으로 홍수에 대한 피해를 줄이고자 홍수 취약성에 대한 많은 연구들이 수행되었지만 아직 젠더를 고려한 취약성 분석은 부족한 실정이다. 본 연구에서는 대상지역을 우리나라의 인구밀집도가 가장 높은 서울시 25개구로 선정하였고, 엔트로피 이론을 활용해 25개 구의 홍수 취약성 지수를 계산하였다. 홍수 취약성 지수 계산 시 고려요인으로는 여성인구비율, 고령화비율 및 인구밀도 등과 같은 사회적 요인과 연 홍수 피해액, 복구금액 등 경제적 요인 그리고 일일 최대 강수량 및 80mm 이상의 강수량, 홍수 피해 횟수 등과 같은 환경적 요인을 고려하였다. 그 결과 각각의 요인에 따라서 서울시 25개구의 홍수취약성 지수가 상이하게 나타나는 것을 확인할 수 있었다. 이를 통해 취약성지수가 높은 자치구들의 경우 지역특성을 고려한 별도의 홍수대책 가이드라인이 필요 할 것으로 판단된다. 본 연구의 결과물을 바탕으로 향후 홍수 대책이나, 홍수대비 관련 정책을 수립할 정부 및 지자체에서 사회, 경제, 환경적 요인을 고려한 합리적인 정책 수립 결정에 도움이 될 것으로 판단된다.

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.19-27
• /
• 1996

The objective of this research is to study on the upper layer temperature, interface height and flow regime in case of several furniture fires such as trashcan, chair, carpet, sofa, mattress and wardrobe as a fire starter in a residential room by performing the experimental studies. The upper layer temperature and the Interface height were relatively well agreed with the experimental results when the flow coefficient at the opening was 0.65-0.8 for the rectangular trashcan, 0.65-0.9 for the circular trashcan and chair, and 0.7-0.9 for the carpet, sofa, mattress and wardrobe. The interface heights for the seven furniture fires were around 1[m] maintaining steady state. However, at the time of the maximum temperature, the interface height was lowered to 0.25[m]-0.75[m] from the floor. The flow regime at the opening was filling and buoyant for the distributed fire, and for the concentrated fire it was filling and then quickly changed to flow, and the flow period was long. The descending speed of the interface height was proportioned to the inflammability of the furniture and the contact surface area with air. The time required to come down around 1[m] was within 1-3 minutes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.365-372
• /
• 2017

Finger electrodes on a crystalline silicon solar cell are required to be constructed as narrow and thick as possible in order to minimize shading losses and electrical resistance. The most common means to construct high-aspect ratio finger electrodes has been screen-printing, but it has difficulty achieving fine finger electrodes because the as-printed finger width is generally wider by 1.3-2.2 times the screen opening width. Consequently, it requires an extremely small screen opening (below $30{\mu}m$) in order to achieve a finger width below $40{\mu}m$. However, the use of such a small screen opening could result in various problems, such as high printing pressure, defective transport of silver paste, and high electrical resistance due to unfavorable mesh marks left on the finger electrodes. In this study, dispensing printing with a screw pump is introduced as an alternative to conventional screen-printing and its unique traits in the front side metallization of crystalline silicon solar cells is discussed.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.3
• /
• pp.289-298
• /
• 2015

The steel tube of Concrete-Filled Tube(CFT) confines the concrete and the concrete restrains the buckling of the tube, The objective of this study is to investigate the influences of the opening shape of the through diaphragm in case of the rectangular CFT column-to-beam connection through the structural experiment. The experiment results are compared with analysis results obtained by using the FEM program. These results are shown that strength of the rectangular CFT column-to-beam connection have similar structural performance regardless of the opening shape if opening areas of the through diaphragm are same. Also in case the connection area/shape of the through diaphragm and the flange of H-beam are similar, it was ascertained that the bending stress occurred at the beam can be transferred to the column through the diaphragm.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.913-922
• /
• 2022

The purpose of this research is to propose the measurement of improving DEM by using the water surface range of SAR image analysis for river corridors and to suggest the construction of satellite-based 3D river spatial information of inaccessible regions such as North Korea. For this research, it has been progressed from the accessible area, watershed of Namgang river, the branch of Nakdonggang river. The satellite image was collected from SAR satellite image data for a year in 2021 which was provided by ESA from Sentinel-1A/B data and extracted from the seasonal water surface area. Ground gauge water level was collected from hourly intervals data by WAMIS. The DEM was improved by analysis of the river altitude of water surface area change by the combination of the ground water level of minimum to maximum water surface area data extracted from SAR image analysis. After the improvement of DEM, the altitude of the river varied that it is defined to comprise more natural form of river DEM than the existing DEM. The correction validation of improvement DEM was necessary in field survey elevation data; however, the correction validation was not progressed due to the absence of the data. Although, the purpose of this research is to provide the improvement of DEM by using the analyzed water surface by existing DEM data and SAR image analysis. After the progression of additional correction validation research, we would plan to examine the application in other places and to progress the additional methodological research to apply in inaccessible and unmeasured area including the North Korea.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.165-171
• /
• 2001

We discuss the influence of annular binary filters on the axial PSF of imaging systems which are apodized by a radiallysymmetric filter and have spherical aberration and coma. In this paper we consider a whole family of annular binary fIlters in two cases. First, the binary filters are composed of two transparent annuli of the same area. Second, the binary filters are composed of a central clear circle and a concentric annular aperture with area bigger than that of the inner circle. In order to investigate the influence of the proposed filters on the axial PSF, we may use the axial resolution gains, which evaluate in terms of the FWHM of the intensity in the focal region of an apodized imaging system in comparison with that corresponding to a nonapodized one. We evaluate the PSF for the conventional and confocal systems having an aberration. ation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.444-444
• /
• 2023

하천 및 저수지와 같은 공간의 수체 탐지는 수자원 관리에서 매우 중요하며, 유역의 수문학적 과정을 이해하는데 도움을 준다. 수문학적 데이터 수집은 우량계, 수위계와 같은 물리적 인프라의 배치가 필요하다. 그러나 상대적으로 저개발된 국가는 수문학적 측정을 위한 인프라가 매우 미흡한 것이 현실이며, 북한과 같은 비접근 지역에 대한 수문학적 과정을 분석하는데는 한계가 있다. 인공위성 원격탐사 센서 중 SAR영상은 지표면에 직접 전파를 방사하고 산란되어 돌아오는 신호를 수신하여 영상을 만들기 때문에 일반적인 광학영상과는 달리 햇빛의 유무와 강우, 구름여부 등의 기상 조건의 영향을 거의 받지 않는 장점이 있다. 또한 국내와 같이 계절적인 요인과 인간활동에 의해 변화되는 물 순환을 SAR 영상은 지표수의 계절적 및 연간 변동성을 모니터링하는데 매우 유용한 자료로 평가되고 있다. 본 연구는 SAR영상을 이용하여 국내의 검증 가능한 지역의 저수지 수면적 변화를 모니터링하고 저수지 수면적과 저수량 분석을 수행하는 것을 목적으로 하였다. 분석자료인 SAR영상은 ESA의 Sentinel-1영상을 2022년 4월부터 2022년 11월의 자료를 수집하여 소양강댐 저수지 수면적과 저수량과의 관계식을 도출하였다. 수체 추출을 위한 SAR 영상은 특히 수로의 일부 가장자리와 홍수터의 식물 존재로 인한 제외지의 매핑에 부정확성을 포함하여 처리에 몇 가지 단점을 갖는 한계도 존재하지만 악천후의 기상 조건에서도 작동할 수 있는 SAR 영상의 능력 덕분에 규칙적인 시간 간격으로 수체면적의 변화에 대한 정보를 제공할 수 있다. 향후 북한 지역의 주요 댐 저수지 수면적에 대한 연간변화와 장기간의 추세를 분석하는 연구를 진행할 계획이다.