• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.883-890
• /
• 2011

A numerical study was conducted to determine the optimal design for a vehicle vacuum pump. The degree of vacuum was examined for different design factors such as the angle of vanes, number of vanes, angle and position of the pump inlet-outlet pipe, and angular rotational speed of vanes. The results show that there is a little difference in the degree of vacuum when the angle of vanes are changed, but an angular change in the outlet pipe reduces the pump loss. As the rotational speed is increased, the mass flow rate increases, but a high rotational speed does not result in the maximum degree of vacuum. In addition, when the number of vanes is increased, the scattering range of mass flow rate decreases and pressure drop is abated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.309-317
• /
• 2000

This paper presents the switching angle and voltage to maximize torque/efficiency and minimize torque ripple in the 4-phase 6-poles Switched Reluctance Motor(SRM). SRM drive has high saturation and nonlinear characteristics of inductance. So we cannot hard to find optimal condition by using analytic method. Therefore it is hard to find the operating the switching angle and voltage through the approximated analysis and computer simulation by using SIMULINK according to the speed and torque required by load. From the results, we can say that the optimum average voltage is determined by the load only and the speed is determined by the optimum turn-on/off angle only. And the maximum efficiency and minimum torque ripple depend on switching angle, not on voltage. And then one-chip microcontroller controls the switching angle and voltage of an asymmetrical inverter in the SRM driver. This drive method, which is expect that the driving methods, which are maximizing torque/efficiency and minimizing torque ripple, will be suitable for the electric vehicle, the industrial application and household appliances.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.107-115
• /
• 2002

본 연구는 해양 식물플랑크톤에 지속성 유기오염물질의 영향을 이해하기 위한 목적으로, 연안역에서 우점하는 식물플랑크톤 주요 5종 즉, 규조류 Skeletonema costatum, 침편모조류 Heterosigma akashiwo, 와편모류 prorecentrum dentatum, Prorocentrum minimum, Akashiwo sanguinea를 이용하여을 benzo[a]pyrene (PAHs)에 72시간동안 노출시킨 다음 각 종의 성장 및 저해, 회복능력 등을 조사하였고, benzo[a]Pyrene의 농도 0.1, 1, 5, 10 $\mu\textrm{g}$/l에 Heterosigma akashiwo(Raphidophyceae)를 노출시켜 시간에 따른 광합성률의 변화를 측정하였다. benzo[a]Pyrene에 72시간 노출시킨 후 S. costatum, P. minimum, P. dentatum, akashiwo의 세포수는 1-10 $\mu\textrm{g}$/l의 농도범위에서 극적인 감소를 보인 반면, A. sanguinea는 0.1-1 $\mu\textrm{g}$/l의 낮은 농도범위에서 지수함수적인 감소를 나타냈다. 성장저해 농도 ($IC_{50}$/)는 A. sanguinea가 0.43 $\mu\textrm{g}$/l로 가장 낮았고, H akashiwo(1.17 $\mu\textrm{g}$/l) S. costatum (3.34 $\mu\textrm{g}$/l), p dentatum (3.97 $\mu\textrm{g}$/l), p minimum (7.24 $\mu\textrm{g}$/l)의 순서로 증가하였다. BenEo[a]pyrene의 낮은 농도(1 $\mu\textrm{g}$/l)에 노출되었던 세포들은 5종 모두 시간이 경과함에 따라 회복하는 경향을 나타냈으나 고농도(10, 100 $\mu\textrm{g}$/l)에 노출시에는 P. minimum을 제외하고는 회복되지 않았다. 이러한 결과들은 조사된 5종 중에서 유각 와편모류 P. minimum이 benzo[a]pyrene에 가장 내성이 강하며, 무각 와편모류 A. sangulinea가 가장 약함을 의미한다. benzo[a]pyrene의 여러 농도수준에 노출시켰을 때 H. akashiwo의 광합성 능력은 낮은 농도들에서는 대조구와 유사하였으나, 5 $\mu\textrm{g}$/l의 높은 농도에서는 초기에 매우 낮은 광합성 능력을 보이다가 시간이 경과하면서 대조군보다 더 높은 경향을 나타냈다. 이러한 결과는 식물플랑크톤이 benso[a]pyrene의 낮은 농도에서 노출될 때는 이 물질을 탄소원으로 사용할 가능성이 있음을 시사한다. 본 연구의 결과들은 연안해역에 benso[a]pyrene과 같은 지속성 유기오염물질이 유입되었을 때 내정여부에 따라 식물플랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.230-240
• /
• 2009

The ESCORT model is applied at Mokpo coastal zone to analyze the effect of fresh water discharge released from the gates of the Youngsan River sea-dyke. Applicability and validity of both 2-D and 3-D hydrodynamic modules could be guaranteed by simulating hydrodynamic feature with ebb dominance characteristics. Then, effects of the released discharge on the hydrodynamics are investigated. And analysis of the effects on diffusion phenomena show that 3-D model is essential for such diffusion modelling. Moreover, vertical salinity distributions near the gates are examined, and the influence range of fresh water is also estimated, which shows that dilution of fresh water is going on slowly because of poor flushing.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.57-62
• /
• 2003

A bacteria strain producing extracellular $\beta$-mannanase was isolated from soil and was identified as Bacillus subtilis by 16S rRNA sequence comparison and biochemical determinations. The optimum pH and temperature for the $\beta$-mannanase activity were 5.0 and 5.5$^{\circ}C$, respectively. The zymogram technique revealed a single protein band exhibiting $\beta$-mannanase activity from the culture supernatant. The molecular mass of the enzyme was estimated at approximately 130 kDa. The addition of 0.5% lactose or 0.5% locust bean gum to the LB medium caused to Increase significantly the $\beta$-mannanase productivity from Bacillus subtilis JS-1. The cells grown on LB medium supplemented with lactose produced maximal enzyme activity at the stationary phase. In contrast to this, the $\beta$-mannanase was induced at the logarithmic phase from the cells grown on LB medium supplemented with locust bean gum. The discrepancy in induction times suggests that $\beta$-mannanase was induced by different induction mechanisms depending on the carbon sources in Bacillus subtilis JS-1 .

• Journal of Biomedical Engineering Research
• /
• v.17 no.1
• /
• pp.85-92
• /
• 1996

A monoleaflet polymer artificial heart valve which showed the remarkable improvement in pressure drop compared with other types of artificial valve was designed to minimize the deflection in vertical direction and the displacement of the valve tip in horizontal direction obtained by using finite element method as the location of the supporting members of the valve frame changed stress distribution change was also studied on each model generated by changing the distance between the frame and supporting members. It was found that by using the valve tip horizontal displacement the minimum valve thickness could be obtained in order to prevent the gap between the valve tip and the frame wall.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.115-128
• /
• 2017

Aso caldera volcano is located in central Kyushu, Japan which is one of the largest caldera volcanoes in the world. Nakadake crater is the only active central cone in Aso caldera. There was an explosive eruption on October 8, 2016, the eruption column height was 11 km, and fallout ash was found 300 km away from the volcano. In this study, we performed a numerical simulation to analyze the ash dispersion and the fallout tephra deposits during this eruption using Ash3D that was developed by the United States Geological Survey. The result showed that the ash would spread to the east and northeast, that could not affect the Korean peninsula, and the volcanic ash was deposited at a place from a distance of 400 km or more in the direction of east and northeast. The result was in close agreement with the identified ashfall deposits. Ash3D can be useful for quick forecast for the effects of hazards caused by volcanic ash.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1001-1004
• /
• 2008

This study reviewed the results of utilization of insulation heat curing method using double layer bubble sheet in slab concrete and mass concrete in cold weather environment. First of all, when double layer bubble sheets are applied, it was shown that slab concrete was protected from early freezing by remaining between 6 and $10^{\circ}C$ even in case outside temperature drops $10^{\circ}C$ below zero until the 2nd day from piling, and in the case of mass concrete, with the maximum temperature difference between the center and surface less than $6^{\circ}C$, crack occurrence index was close to 2 and no hydration heat crack occurred by internal constraint. The insulation heat preservation curing method using the double bubble sheet applied in this field prevented early freezing owing to stable curing temperature management, deterring concrete strength development delay at low temperature, and obtained the needed strength. Also, it was proven that the method is highly effective and economic for cold weather concrete quality maintenance through curing cost reduction like construction period shortening and labor cost reduction, etc by reducing the process of temporary equipment installation and disassembling.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.43-50
• /
• 2001

In this paper, the discharge phenomena and electromagnetic waves caused by discharge with insertion of a solid insulator and flame between sphere-sphere electrodes in air ware investigated. The surface discharge light and patterns of flame generated on a solid insulator surface were observed by using a CCD(Charged Coupled Device) camera. Also, the radiated electromagnetic waves were measured by using a biconical antenna and a spectrum analyzer. The surface discharge light generated on the solid insulator surface was larger and the size of flame was smaller by increasing allied voltages. Also, voltage distortion by voltage drop was strongly revealed when a insulator surface was polluted. When a solid insulator surface was not polluted, the electric field stength of electromagnetic waves was 10∼17[dBuV/m] higher than a polluted solide insulator, and 5∼9[dBuV/m] higher than a polluted solide insulator and flame.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.242-245
• /
• 2003

Buckwheat contains dietary rutin, a flavonol glycoside, which is able to antagonize hypertension in human and has antioxidant activity. Monacolin K, a secondary metabolite produced by fungi Monascus species, is an effective specific inhibitor of cholesterol biosynthesis. To develop functional health food, dehulled buckwheat was fermented with Manascus ruber to produce Anka, and contents of rutin and monacolin K and Anka were determined. The rutin content in dehulled buckwheat decreased slightly after germination, but increased with the growth of sprout. Growth of fungi had no influence on rutin content in dehulled buckwheat Anka, Monacolin K content in fermented dehulled buckwheat malt was lower than that in dehulled buckwheat Anka. Monacolin K content in dehulled buckwheat Anka decreased with increasing length of sprout in fermented dehulled buckwheat malt, probably due to consumption of nutrients, such as polysaccharides as carbon sources, during sprouting for growth of M. ruber.