• Journal of Korea Water Resources Association
• /
• v.47 no.6
• /
• pp.501-511
• /
• 2014

The effects of initial conditions and input values of the rainfall-runoff model were studied in the applications of a lumped concept model for flood event data extension. For the initial conditions of the rainfall-runoff model, baseflow effects and spatial distributions of saturation points ($R_{sa}$) for the storage function methods (SFM) were analyzed. In addition, researches on the effects of rainfall data conditions as input values for the rainfall-runoff model were performed. The Chungju Dam watershed was selected and divided into 3 catchments including smaller size of 22 sub-catchments. The observed discharge and inflow amounts at Yeongwol 1, Chungju Dam, and Yeongwol 2 water level stations were individually operated as criteria for flood data extension in 30 flood events from 1993 to 2009. Direct and base flow were distinguished from a stream flow. In order to test capability of flood data extension, obtained base flow was applied to the rainfall-runoff model for three water level stations. When base flow was adopted in the model, the Nash-Sutcliffe Efficiency(NSE) was increased. The numbers of over satisfaction for model performance (>0.5) were increased over 10%. Saturation points ($R_{sa}$) which strongly influence the runoff amount when rainfall starts were optimized based on the runoff amount at three water level stations. The sizes of saturation points for three locations were similar which means saturation point size is not depending on the runoff amount. The effects of rainfall information for flood runoff were tested at 2002ev1 and 2008ev1. When increased the amount of rainfall information, the runoff simulations were closer to the simulations with full of rainfall information. However, the size of improvement was not substantial on rainfall-runoff simulations in terms of the size of total amount of rainfall.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.737-748
• /
• 2022

Due to the lack of flood data, the water engineering practice calculates the design flood using rainfall frequency analysis and rainfall-runoff model. However, the rainfall frequency analysis for arbitrary duration does not reflect the regional characteristics of the duration and amount of storm event. This study proposed a practical method to calculate the design flood in a watershed considering the characteristics of storm event, based on the bivariate rainfall frequency analysis. After extracting independent storm events for the Pyeongchang River basin and the upper Namhangang River basin, we performed the bivariate rainfall frequency analysis to determine the design storm events of various return periods, and calculated the design floods using the HEC-1 model. We compared the design floods based on the bivariate rainfall frequency analysis (DF_BRFA) with those estimated by the flood frequency analysis (DF_FFA), and those estimated by the HEC-1 with the univariate rainfall frequency analysis (DF_URFA). In the case of the Pyeongchang River basin, except for the 100-year flood, the average error of the DF_BRFA was 11.6%, which was the closest to the DF_FFA. In the case of the Namhangang River basin, the average error of the DF_BRFA was about 10%, which was the most similar to the DF_FFA. As the return period increased, the DF_URFA was calculated to be much larger than the DF_FFA, whereas the BRFA produced smaller average error in the design flood than the URFA. When the proposed method is used to calculate design flood in an ungauged watershed, it is expected that the estimated design flood might be close to the actual DF_FFA. Thus, the design of the hydrological structures and water resource plans can be carried out economically and reasonably.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.282-286
• /
• 2017

Rapid industrialization and urbanization have resulted in an increase in impervious areas and an increase in runoff, therefore, this causes more flooding and damage in urban areas. This study has analyzed the effects of improvements to the roughness coefficient in storm sewer pipes on flood runoff and outflow through rainfall-runoff simulations. The simulations are implemented by three scenarios to evaluate effects of improvements to the roughness coefficient for the improved length ratio to the total length, diameters and mainlines of sewer pipes. The size and length of the sewer mains are large and long to effectively increase the flow rate to the outlet, secure the passage discharge capacity of the pipe and reduce the overflow. It is effective for flood reduction that the improvement to roughness coefficient is first conducted in mainlines with longer lengths and larger diameters. The results from this study can provide a guideline for prioritizing of the sewer pipe replacement.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.89-93
• /
• 2010

It is well known that the drastic change of hydrological characteristics of an urbanized basin causes severe runoff, sediment yield, and peak flow. High vulnerability of urban flood disasters is caused by land-use change and development of a basin. A typical site suffering urbanization was selected and the experimental site has being operated last three years. Hydrological and hydraulic characteristics of the urbanizing basin were examined by observation of runoff, sediment loads and precipitation with T/M. The effects of land-use change were analyzed by examination of the hydrological characteristics, such as run-off ratio (runoff volume/rainfall volume), sediment yields. Runoff coefficient of rational equation was increased as basin was urbanized. Suspended sediment yields due to a urban development activities were raised almost 10 times compare to undisturbed condition for small runoff less than 1 cms. Meanwhile, no big change could be detected for bed loads.

• Journal of Korea Water Resources Association
• /
• v.53 no.6
• /
• pp.451-461
• /
• 2020

Urban flooding due to rapid urbanization has recently become frequent. In this study, a hydraulic model experiment was conducted on Shinwol rainwater storage and drainage system constructed for the first time in South Korea to prevent urban flooding. Experiments were preformed for 55 scenarios, of which 19 overflows occurred. In addition, the video analysis for the scenarios where the overflow occurred showd that the overflow occurred during the process of exhausting the pressurized air in the facility and the undular bore were moving. Results of this study, it was judge that it would be advantageous to maintain a completely drained or full-pipe condition for stable operation of the Shinwol rainwater storage and drainage system for continuous rainfall in the future. And it is necessary to additional research on the correlation for the magnitude of inflow discharge, overflow and undular bore.

• Water for future
• /
• v.29 no.3
• /
• pp.207-216
• /
• 1996

The subject research attempts to evaluate the variations of total runoff volume, peak flow, and travel time depending on the urbanhization, return periods and rainfall patterns under the situations that the preparation of a large residential site at the lowland areas of the downstream of Dongsu stream in Bupyung-Gu, Incheon city is progressed and the area will be eventually fully developed. The ILLUDAS model was used for the runoff analyses based on 3 differend steps of urbanization and 4 different types of Huff's quantile according to rainfall patterns is Huff's 4 quantile, Huff's 2 quantile, Huff's 3 quantile and Huff's 1 quantile. Under the 80 and 90 % of urbanization to the 70% of urbanization, the mean increasing ratio of total runoff volume for each case is 3.5 and 5.5 %, that of peak flow is 4.2 and 8.8%, and the mean decreasing ratio of travel time is 4.4 and 10.1%, respectively. The mean increasing ratio of total runoff volume according to the return periods is 3.0 and 5.4%, that of peak flow is 3.9 and 8.0% under the same conditions of urbanization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1350-1354
• /
• 2010

SWAT 모형에서는 토양수량을 고려하여 유출곡선지수법에 따라 지표유출량과 침투량을 계산하고, 계산된 침투량이 토양수대가 받을 수 있는 최대용량인 토양수 최대보수용량(soil water capacity)을 초과할 경우에는 그 초과분을 강제적으로 토양수량에 더해지도록 처리하고 있다. 즉, 초과침투량이 연직 아래로만 유입되는 것으로 간주하고 있다. 이러한 방식은 경사가 매우 완만한 경우에는 적합하다고 할 수 있으나, 국내 유역에서와 같이 비교적 유역 경사가 급한 경우에는 지표유출량이 작게 계산될 수 있으며 특히 집중호우시 강우에 대한 유출 응답이 둔감하게 모의되어 홍수기 큰 강우로 인해 급격하게 증가하는 유출량을 잘 모사하지 못하게 되는 경우가 발생한다. 따라서 본 연구에서는 홍수기 큰 강우에 대해서 유출량이 민감하게 반응할 수 있도록 초과침투량 재분배 모듈($\underline{R}$edistributing $\underline{EX}$cessive $\underline{INF}$iltration module, 이하 SWAT-REXINF)을 개발하였다. 이 모듈은 토양층의 보수능을 초과하는 침투량 처리 방식을 개선한 것으로 지표유출의 집중시간과 토양수의 침루 유하시간의 상대적인 크기에 따라 초과침투량을 분배하여 지표유출량과 침투량에 할당하는 방식을 취하고 있다. 개발 모듈 SWAT-REXINF을 기 개발한 시간가중평균 유출곡선지수법에 의한 지표유출계산법과 접합-분리 방식의 토양층 구조화 기법 등의 유출계산 개선 기법과 접목하여 그 효과를 충주댐 유역에 대해 분석하였다. 시간가중평균 유출곡선지수법에 의한 지표유출계산법과 접합-분리 방식의 토양층 구조화 기법 등 다른 유출 개선 기법과 혼용하여 적용할 경우에는 지표유출량이 약 2배 증가, 첨두유량은 20~50% 증가하는 등 개선 효과가 매우 크게 나타났다. 모형 개선으로 인해서 강우량에 대한 유출량의 응답 민감도를 증가시켜 유출수문곡선의 증감을 보다 용이하게 모의할 수 있고 정확도 또한 높일 수 있을 것으로 판단된다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2012

The QoS guarantee for the forward link in satellite communication networks is very important because there are a variety of packets with multiplexing. Especially, the packets are processed depending on the available bandwidth in satellite network changing the wireless channel state in accordance with weather condition. The DVB-S2 increases the transmission efficiency by applying the adaptive coding and modulation (ACM) techniques as a countermeasure of rain attenuations. However, the channel estimation algorithm is required to support the ACM techniques that select the MODCOD values depending on the feedback data transmitted by RCSTs(Return Channel via Satellite Terminal) because satellite communication networks have a long propagation delay. In this paper, we proposed the channel estimation algorithm using rain attenuation values and reference data and the packet scheduling scheme to support the QoS and fairness. As a result of performance evaluation, we showed that proposed algorithm exactly predicts the channel conditions and supports bandwidth fairness to the individual RCST and guarantees QoS for user traffics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.889-893
• /
• 2012

전 국토의 약 7.6%를 차지하고 있는 밭은 장마철이나 집중호우에 의해 하천의 탁수문제를 유발할 뿐만 아니라, 수생태계에도 악영향을 미치기 때문에 비점오염원을 저감시켜야 한다. 이러한 비점오염원을 줄이기 위한 여러 최적관리방법 중 침사구를 밭의 유출부에 적용하여 비점오염물질의 유출저감효과를 평가 하고자 하였다. 평가 방법은 6개(각 110m2)의 무밭을 조성하여 무 재배기간(2011년 4월부터 7월) 동안 시험포에서 발생하는 강우유출수를 1.125 m3($1.5m{\times}1.5m{\times}0.5m$) 크기의 침사구 3개로 각각 유입되도록 하였다. 침사구로 유입된 유출수는 토양으로 침투 및 저류 또는 증발되도록 하였고, 강우에 의한 유출수의 양이 침사구의 용량보다 클 경우 침사구 유출부를 통해 유출되도록 하였다. 연구 결과 평균 64.1%의 유출량 저감효과가 있는 것으로 나타났으며, 수질농도는 BOD5 39.0%, SS 62.1%, CODMn 43.4%, DOC 43.5%, T-N 40.0%, T-P 41.2%의 저감효과가 있는 것으로 나타났다. 유출량과 수질농도를 고려한 오염부하 저감효과는 유출량이 적었던 #2와 #3의 침사구에서 모든 수질항목에서 각각 80%와 90% 이상의 저감효과가 나타났다. 본 연구의 결과를 바탕으로 밭에서 발생하는 비점오염물질 저감을 위해 밭의 유출부에 작은 웅덩이와 같은 침사구를 설치할 경우 비점오염을 저감하는데 매우 효과적인 것으로 판단된다. 또한 강우유출수가 적을 경우 침사구에 의한 유사량의 저감효과도 매우 클 것으로 판단된다. 따라서 밭에서 발생하는 비점오염원을 줄이기 위해서는 본 연구와 같이 밭의 지표를 볏짚이나 다른 피복재 등으로 피복하여 토양의 이동을 최소한으로 줄여 오염부하량을 저감하고, 유출이 발생할 경우 밭의 유출부에 침사구를 설치하여 하천으로 유입되는 오염물질을 저감해야 할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.942-942
• /
• 2012

강우-유출에 대한 수문해석에 있어 유효강우량 산정방법으로는 여러 가지가 있으나 국내외로 미농무부(United States Department of Agriculture)에서 제안한 NRCS-CN 방법이 널리 사용되고 있다. SCS-CN 방법은 1개의 매개변수만을 사용하여 방법이 간략하고 유역 토양특성의 반영이 가능하다는 장점이 있으나 공간적 규모에 따른 효과반영이 불가하고 초기손실우량비를 0.2로 고정하는 가정의 문제점 등이 있다. 많은 연구자들이 SCS-CN 방법의 문제점을 보완하고자 다양한 방법을 제시하였으며 특히 Michel 등(2005)은 토양수분계산가정(Soil Moisture Accounting Procedure)에서 유출기준저류고를 새로운 매개변수로 제안하여 초기손실우량비 가정의 불합리성을 개선하고 새로운 AMC 조건식을 산정하였다. 그러나 범용적인 AMC 조건식을 제안하고자 140개 유역에 적용한 결과를 통해 유출기준저류고는 토양의 최대잠재보유수량의 1/3으로 일괄 적용하는 문제점이 있으며, 민감도분석을 통해 전체 결과의 효율이 좋은 값으로 선정하였다. 이에 본 연구에서는 일 단위 집중형 장기유출모형인 GR4J(Ge'nie Rural a' 4 parame'tres Journalier)를 Michel이 제안한 모형을 적용하기 위해 선정하였으며 토양수분계산과정에서 새로운 매개변수인 유출기준저류고를 최적화기법인 화음탐색법을 적용하여 결정하였다. 적용대상은 국내의 달방댐, 횡성댐, 섬진강댐, 청주댐, 대청댐유역에 적용하였으며 본 연구에서 제안한 방법이 강우-유출 결과의 정확성을 향상시키는 것을 볼 수 있었다. 최종적으로 최적화된 유출기준저류고와 유역크기와의 상관성분석을 통하여 관계식을 도출하였다. 토양수분과정에 대한 고려는 유출량을 산정하는 데 있어서 정확성을 높이는 데 기여할 수 있으며 더불어 본 연구에서 제안한 관계식을 통하여 유출기준저류고와 유역특성과의 연관성을 확인할 수 있었다.