• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.99-106
• /
• 2015

To estimate the effects of suspended sediments flowing into the Saemangeum Reservoir on the extent of contamination of the reservoir, the suspended sediments were collected with sediment traps, which were installed from the upstream of the Mankyung and Dongjin Rivers to estuary of the reservoir, respectively, and the sedimentation rates and the chemical characteristics of suspended sediments were analyzed. The sedimentation rates in the Mankyung and Dongjin Rivers were ranged from 0.01~5.06 and $0.01{\sim}8.75kg/m^2/day$, respectively. Those were higher to the upstream of rivers, and were mainly affected by flood events. The concentrations of organic matters were from 3.3 to 9.6 times higher than those in the stream sediments and were higher after flood season, indicating the contaminants come from the non-point sources on the basin. The concentrations of total nitrogen and total phosphorus in the suspended sediments showed the same trend with the organic matters. These results indicate that the suspended sediments from the basin of the Mankyung and Dongjin Rivers are highly contaminated and the countermeasures to manage the sources of contamination on the basin are required to maintain the water quality of the Saemangeum Reservoir.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.95-104
• /
• 2010

The storage function model is one of the most commonly used models for flood forecasting and warning system in Korea. This paper studies the physical significance of the storage function model by comparing it with kinematic wave model. The results showed universal applicability of the storage function model to Korean basins. Through a comparison of the basic equations for the models, the storage function model parameters, K, P and $T_l$, are shown to be related with the kinematic wave model parameters, k and p. The analysis showed that P and p are identical and K and $T_l$ can be related to k, basin area, and coefficients of Hack's law. To apply the storage function model throughout the southern part of Korean peninsular, regional parameter relationships for K and $T_l$ were developed for watershed area using data from 17 watersheds and 101 flood events. These relationships combine the kinematic wave parameters with topographic information using Hack's Law.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2011

To understand characteristics of the water quality on the coastal boundary on tidal flat, field observations between 2008 and 2009 were undertaken twice a month at five coastal areas (Muan bay, Tando bay, Hampyeong bay, Shinan Jido and Yeongkwang coastal areas). Yearly water temperature difference was large with the range between $1.3^{\circ}C$ and $31.1^{\circ}C$. Salinity was about 32 but was the lower less than 20 for the heavy rainfall season. DO was high in winter and low in summer according to the variation of water temperature. pH represented the variation similar to DO. Suspended solid was averagely high over 100 mg/l in Yeongkwang coastal area, especially. COD did not revealed large variation with the value of about 1 mg/l. DIN and DIP concentration were high when freshwater was highly input in summer. DIN concentration was low for winter and early spring but DIP concentration did not show the seasonal variation with the continuous increase from July 2009 to December 2009. Chlorophyll a appeared high for spring with approximately $10\;{\mu}g/l$ and was higher for summer in Yeongkwang coastal area than other sites. The results of principal component analysis conducted to compare the characteristics of water quality observed in study areas showed the distinguishable features as follows. The freshwater input fluctuation appeared as the first factor in Muan and Tando bays, and the change of water temperature was the first factor in Shinan Jido and Yeongkwang coastal areas. The influence mixed with the variation of freshwater outflow and the change of water temperature in Hampyeong bay was to be the first factor.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.166-172
• /
• 2016

Accurate understanding of land surface is essential to analyze energy exchanges between earth surface and atmosphere. For the quantization of energy fluxes, the various researches about Land Surface Model(LSM) have been progressed. Among the various LSMs, the researches using Common Land Model(CLM) and Variable Infiltration Capacity(VIC) model are performed briskly. The CLM which is advanced LSM can calculate realistic results with few user defined parameters. The VIC model which is also typical LSM is widely used for estimation of energy fluxes and runoff in various fields. In this study, the energy fluxes which are net radiation, sensible heat flux, and latent heat flux were estimated using CLM and VIC model at Southern Sierra-Critical Zone Observatory(SS-CZO) site in California, United States. In case of net radiation and sensible heat flux, both models showed good agreement with observations, however, the CLM showed underestimated patterns of net radiation and sensible heat flux during precipitation period. In case of latent heat flux, the CLM represented better estimation of latent heat flux than VIC model which underestimated the latent heat flux. Through the estimation of energy fluxes and analysis of models' pros and cons, the applicability of CLM and VIC models and need of multi-model application were identified.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.172-178
• /
• 2009

Relation between spatial variation of soil salinity and emergence of five upland crops such as sudan grass, sesbania, barnyard grass, corn and soybean was studied in the three reclaimed lands of Korea during two years from 2007 to 2008. Although soil salinity is vary high at seeding season, desalting treatment by three days-flooding before seeding, reach at favorable level lower than $6dS\;m^{-1}$ of soil salinity for emergence of soiling and forage crops and then plant number emerged(No. $m^{-2}$) was 55~149 for sudan grass, 118~266 for barnyard grass, 46~115 for sesbania, 3~11 for corn and 6~19 for soybean in 2007. However plant number emerged under no desalting treatment varies place by place because of soil salinity difference in 2008. Plant number emerged after seeding according to soil salinity was well expressed as logarithmic function, and sharply decrease with increase of soil salinity. It is accordingly concluded that desalting treatment of flooding before seeding of upland crops is essential for good emergence in the newly reclaimed land from tidal flat.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.35-45
• /
• 2014

Limit equilibrium methods of slope stability analysis have been widely adopted mainly due to their simplicity and applicability. However, the conventional methods may not give reliable and convincing results for various geological conditions such as nonhomogeneous and anisotropic soils. Also, they do not take into account soil slope history nor the initial state of stress, for example excavation or fill placement. In contrast to the limit equilibrium analysis, the analysis of deformation and stress distribution by finite element method can deal with the complex loading sequence and the growth of inelastic zone with time. This paper proposes a technique to determine the critical slip surface as well as to calculate the factor of safety for shallow failure on partially saturated soil slope. Based on the effective stress field in finite element analysis, all stresses are estimated at each Gaussian point of elements. The search strategy for a noncircular critical slip surface along weak points is appropriate for rainfall-induced shallow slope failure. The change of unit weight by seepage force has an effect on the horizontal and vertical displacements on the soil slope. The Drucker-Prager failure criterion was adopted for stress-strain relation to calculate coupling hydraulic and mechanical behavior of the partially saturated soil slope.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.5
• /
• pp.1-9
• /
• 2019

In this paper, we propose a video enhancement method using generative adversarial networks to remove raindrops and restore the background information on the removed region in the coastal wave video imagery distorted by raindrops during rainfall. Two experimental models are implemented: Pix2Pix network widely used for image-to-image translation and Attentive GAN, which is currently performing well for raindrop removal on a single images. The models are trained with a public dataset of paired natural images with and without raindrops and the trained models are evaluated their performance of raindrop removal and background information recovery of rainwater distortion of coastal wave video imagery. In order to improve the performance, we have acquired paired video dataset with and without raindrops at the real coast and conducted transfer learning to the pre-trained models with those new dataset. The performance of fine-tuned models is improved by comparing the results from pre-trained models. The performance is evaluated using the peak signal-to-noise ratio and structural similarity index and the fine-tuned Pix2Pix network by transfer learning shows the best performance to reconstruct distorted coastal wave video imagery by raindrops.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.9-12
• /
• 2008

The semi-rigid joint is the shape of middle that can supplement the defect of pin joints and accept the good point of rigid joints. Recently, a study on the pin joints is activated in the country, but because the study on semi-rigid joints is not many, this study tried to prove with producing test model of three shape. The test models are rigid joint HI-R, semi-rigid joint HI-S, pin joint HI-P. As a result of the test, respectively HI-R, HI-S, HI-P appeared shear failure of joint, flexure failure of the top fixing, flexure failure of the lower part slipping stair slab, and the maximum strength is measured to 51.74, 51.4, 24.63kN, the stiffness is appeared 1.58, 1.19, 0.37 respectively, The yield strength is respectively kept 44.5, 47.3, 24kN, and ductility ratio is appeared to 3.31, 2.32, 1.54, when is based on KBC code, sag of the acting service load is appeared that HI-P model is over the standard. When is based on distribution of bars strain ratio, HI-S seems similar behavior incipiently, but after the yield, the semi-rigid joint was able to be judged better than pin joint because of the stress allotment of joint internal elements.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.47-57
• /
• 2017

In this study, a predictive analysis was conducted on sediment disaster hazard area by selecting six research areas (Chuncheon, Seongnam, Sejong, Daejeon, Miryang and Busan) among the urban sediment disaster preliminary focus management area. The models that were used in the analysis were the existing models (SINMAP and TRIGRS) that are commonly used in predicting sediment disasters as well as the program developed through this study (LSMAP). A comparative analysis was carried out on the results as a means to review the applicability of the developed model. The parameters used in the predictions of sediment disaster hazard area were largely classified into topographic, soil, forest physiognomy and rainfall characteristics. A predictive analysis was carried out using each of the models, and it was found that the analysis using SINMAP, compared to LSMAP and TRIGRS, resulted in a prediction of a wider hazard zone. These results are considered to be due to the difference in analysis parameters applied to each model. In addition, a comparison between LSMAP, where the forest physiognomy characteristics were taken into account, and TRIGRS showed that similar tendencies were observed within a range of -0.04~2.72% for the predicted hazard area. This suggests that the forest physiognomy characteristics of mountain areas have diverse impacts on the stability of slopes, and serve as an important parameter in predicting sediment disaster hazard area.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.11-19
• /
• 2002

The seasonal variation of $^7Be$ and $^{137}Cs$ concentrations in airborne dust, precipitation and dry fallout collected at Daejeon during the period of 1998 - 1999 has been studied. The annual mean values of 7Be concentrations in airborne dust, precipitation and dry fallout were in the range of $3.80{\sim}4.29\;mBq\;m^{-3},\;1.25{\sim}1.67\;Bq\;l^{-1},\;19.7{\sim}22.3 MBq\;km^{-2}$, respectively. The annual mean values of $^{137}Cs$ concentrations in airborne dust, precipitation and dry fallout ranged $1.08{\sim}1.28{\mu}Bq\;m^{-3},\;0.44{\sim}2.66 mBq\;l^{-1}\;\;0.036{\sim}0.0455\;MBq\;km^{-2}$, respectively. While the concentrations of $^7Be$ and $^{137}Cs$ in airborne dust and dry fallout were relatively higher in the spring and autumn when the amount of dry fallout increased than in other season, their concentrations in precipitation were relatively lower in the summer when the rainfall increased. The total depositions of $^7Be$ and $^{137}Cs$ due to dry fallout and precipitation were in the range of $80.7{\sim}137MBq\;km^{-2}$ and $0.059{\sim}0.060MBq\;km^{-2}$, respectively. More than 80% of $^7Be$ deposition resulted from precipitation, whereas about 60% of $^{137}Cs$ deposition was due to dry fallout.