• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.185-193
• /
• 2020

This purpose of this study was to investigate the effects of 16-week long-term walking exercise on the feeling, mood state, and life stress of college students. Participations in this study were 50 college students, and 24 Walking Group and 26 Control Group were random sampled to experiment the psychological effect of exercise walking. The experimental design was designed by factorial design by 2×3 repeated measurements. Data collection was conducted for 0week, 8week, 16week of feeling, mood state and life stress of college students. As a result, WG showed a positive increase in feeling status compared to CG. Negative mood state such as tension, anger, depression, fatigue, and confusion have been greatly reduced, vigor has increased, and stress on college student life such as friends, study, economy, future, and values has decreased statistically. The results of this study can be used as a way of coping with the stress of college students to improve their study motivation and quality of life.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.141-154
• /
• 1993

In this paper, a method to calculate the ultimate compressive strength of welded one-sided stiffened plates simply supported along all edges is proposed. At first initial imperfections such as distortions and residual stresses due to welding are predicted by using simplified methods. Then, the collapse modes of the stiffened plate are assumed and collapse loads for each mode are calculated. Among these loads, the lowest value is selected as the ultimate strength of the plate. Collapse modes are assumed as follows ; (1) Overall buckling of the stiffened plate$\rightarrow$Overall collapse due to stiffener bending (2) Local buckling of the plate part$\rightarrow$Local collapse of the plate part$\rightarrow$Overall collapse due to stiffener yielding (3) Local buckling of the plate part$\rightarrow$Overall collapse due to stiffener berthing (4) Local buckling of the plate part$\rightarrow$Local collapse of the plate part$\rightarrow$Overall collapse due to stiffener tripping. The elastic large deflection analysis based on the Rayleigh-Ritz method is carried out, and plastic analysis assuming hinge lines is also carried out. Collapse load is defined as the cross point of the two analysis curves. This method enables the utimate strength to be calculated with small computing time and a good accuracy. Using the present method, characteristics of the stiffener including torsional rigidity, bending and tripping can also be clarified.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.3
• /
• pp.11-19
• /
• 2009

Recently, concerns relating to the maintenance of large structures have been increased. In addition, the number of large structures that need to be evaluated for their structural safety due to natural disasters and structural deterioration has been rapidly increasing. It is common for the structural characteristics of an older large structure to differ from the characteristics in the initial design stage, and changes in dynamic characteristics may result from a reduction in stiffness due to cracks on the materials. The process of deterioration of such structures enables the detection of damaged locations, as well as a quantitative evaluation. One of the typical measuring instruments used for the monitoring of bridges and buildings is the dynamic measurement system. Conventional dynamic measurement systems require considerable cabling to facilitate a direct connection between sensor and DAQ logger. For this reason, a method of measuring structural responses from a remote distance without the mounted sensors is needed. In terms of non-contact methods that are applicable to dynamic response measurement, the methods using the doppler effect of a laser or a GPS are commonly used. However, such methods could not be generally applied to bridge structures because of their costs and inaccuracies. Alternatively, a method using a visual image can be economical as well as feasible for measuring vibration signals of inaccessible bridge structures and extracting their dynamic characteristics. Many studies have been conducted using camera visual signals instead of conventional mounted sensors. However, these studies have been focused on measuring displacement response by an image processing technique after recording a position of the target mounted on the structure, in which the number of measurement targets may be limited. Therefore, in this study, a model experiment was carried out to verify the measurement algorithm for measuring multi-point displacement responses by using a DIC (Digital Image Correlation) technique.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.611-624
• /
• 2000

In this study we analysed 3-12 grade science textbooks, many literatures and internet sites related to diffusion and dissolution concepts. From these data, we discovered that the explanations of diffusion that used in textbooks are not considered the site of collision with mediums, and confused with dissolution, state transition and effusion. In the case of dissolution, almost analysis data were short of the explanations of interaction effect. Most of all, the focus of dissolution explanations was to solve the calculation problems rather than to understand the concept. Every internet site was poor, just as the level of showing textbook contents with computer, so the only effect of using computer was the sense of sight and hearing. Chemistry must be understood nature phenomena with a view point of particle theory, but many textbooks and Internet sites didn't represent it sufficiently. We set up the correct scientific concept and linked micro world of particle theory with macro world of nature phenomena. With a use of computer which have the advantage of representing moving things, we developed the computer-assisted instruction programs related to diffusion and dissolution with the viewpoint of particle movement.

• Korean Journal of Veterinary Service
• /
• v.34 no.3
• /
• pp.235-243
• /
• 2011

Probiotics have many effects such as antihypertensive, prevention of cancer, antioxidation, reduction of dermatitis symptoms, improvement of mineral absorption, reduction of allergic symptoms, and decrease of cholesterol, However, the main role of probiotics is that they balance intestinal microbials proportion. L. acidophilus is one of probiotics and microflora in intestine. It has an acidification activity, aroma production, texture formation and probiotics properties. We studied on the roles of L. acidophilus in mice. In this study, body weights of mice were decreased when administration of L. acidophilus ($1{\times}10^{10}$ CFU) and swimming ability has been raised than a normal group after feeding on L. acidophilus ($1{\times}10^{10}$ CFU). After taking L. acidophilus ($1{\times}10^{10}$ CFU), total white cells were increased than a normal group; hemoglobin and thrombocytes were increased. The level of cholesterol and triglyceride were decreased in blood analysis. We knew L. acidophilus is related to innate immune system. We found out the secretion of cationic peptide was increased in the Lysoplate assays as a result of L. acidophilus ($1{\times}10^{10}$ CFU) administration. Appearance rate of lysozyme was also increased than the normal group on an immunohistochemistry stain. We confirmed L. acidophilus contributes to host health through innate immune system stimulation. L. acidophilus more than $1{\times}10^{10}$ CFU are thought to be beneficial for the host health and prevention of intestinal diseases in field condition.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.77-86
• /
• 2011

The concrete creep deformation of a hybrid composite section can cause additional deformation of the composite section and the stress relaxation of pre-compressive stress on the concrete section due to partial restraint of the deformation. In this study, the stress relaxation coefficient method (SRCM) is derived for simple analysis of complicate hybrid or composite sections for engineering purpose. Also, an equation of the stress relaxation coefficient (SRC) required for the SRCM is proposed. The SRCM is derived with the parameters of a creep coefficient, section and loading properties using the same method as the constant-creep step-by-step method (CC-SSM). The errors of the SRCM is improved by using the proposed SRC equation than the average SRC's which were estimated from the CC-SSM. The root mean square error (RMSE) of the SRCM with the proposed SRC equation for concrete with creep coefficient less than 3 was less than 1.2% to the creep deformation at the free condition and was 3.3% for the 99% reliability. The proposed SRC equation reflects the internal restraint of composite sections, and the effective modulus of elasticity computed with the proposed SRC can be used effectively to estimate the rigidity of a composite section in a numerical analysis which can be applied in analysis of the external restrain effect of boundary conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.319-326
• /
• 2020

PRNGs(Pseudorandom number generators) are essential for generating encryption keys for to secure online communication. A bitstream generated by the PRNG must be generated at high speed to encrypt the big data effectively in a symmetric key cryptosystem and should ensure the randomness of the level to pass through the several statistical tests. CA(Cellular Automata) based PRNGs are known to be easy to implement in hardware and to have better randomness than LFSR based PRNGs. In this paper, we design PRNGs based on PMLCA(Programable Maximum Length CA) that can generate effective key sequences in symmetric key cryptosystem. The proposed PRNGs generate bit streams through nonlinear control method. First, we design a PRNG based on an (m,n)-cell PMLCA ℙ with a single complement vector that produces linear sequences with the long period and analyze the period and the generating polynomial of ℙ. Next, we design an (m,n)-cell PC-MLCA based PRNG with two complement vectors that have the same period as ℙ and generate nonlinear sequences, and analyze the location of outputting the nonlinear sequence.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.461-466
• /
• 2010

A cylindrical UV sterilization system was developed to decrease microorganisms in centrifuged Takju (CT). CT was run through 110 strips of honey comb type-teflon tubes and 9 UV lamps (1395 W) were equipped between teflon tubes. The optimum sterilization condition of CT was fixed for 1.5 min at 2 L/min in overall quality aspects; also, 5~6 log cycle decrease of viable cell numbers of total bacteria and yeast was observed at this operating condition. Quality changes of UV-sterilized CT were examined by UV irradiation of CT followed by storing at $30^{\circ}C$ for 8 days. To evaluate quality changes of UV-sterilized CT, pH, amino nitrogen content, acidity, reducing sugar content and viable cell numbers of total bacteria and yeast were measured. The growth of yeast and bacteria was retarded, showing around $10^8\;CFU/mL$ even after 4 days and $10^8\;CFU/mL$ after 6 days, respectively. Also, UV sterilized CT showed no changes in pH, titratable acidity, and amino nitrogen content during storage except reducing sugar content. UV sterilization did not cause significant difference in L, a, and b values between CT and UV-sterilized CT over the storage period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1184-1189
• /
• 2001

This study was conducted to investigate the effect of Hijikia fusiforme extracts on serum lipid and liver antioxidative enzyme activities in triton-induced hyperlipidemic rats. Sprague-Dawley male rats divided into 7 groups : We injected saline to a normal group (N), saline and tween 80 to control groups (CS, CT) and tot extracts to experimental groups (CSA, CTEtOH, CTE, CTH) for 7 days and then injected triton at the last day. Serum and liver free cholesterol contents were significantly lower in hexane-treated group (CTH) than control group (CT) whereas serum HDL-cholesterol content was higher in aqueous extract group (CSA) than control group (CS). Total cholesterol and phospholipid contents in serum and liver were lower in aqueous extract group (CSA) than control group (CS). Serum and liver triglyceride contents were significantly lower in ethanol (CTEtOH) and hexane treated group (CTH) than control group (CT). Thiobarbituric acid reactive substances of liver were lower in tot extract groups (CSA, CTEtOH, CTE, CTH) than control groups (CS, CT). Superoxide dismutase activities in liver were significantly lower in aqueous extracts group (CSA) and hexane treated group (CTH) than control groups (CS, CT). Liver catalase activity was the lowest in ethylacetate extract group. These results showed that some Hijikia fusiforme extracts have reduction effect of lipid and antioxidative effect in triton-induced hyperlipidemic rats.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.451-454
• /
• 2015

This paper introduces 3 type of OTAs with $0.35-{\mu}m$ standard CMOS technology for Low-Power, Low-Voltage. The first type is a two-stage OTA designed to operate with a 1-V VDD and it has $1.774{\mu}W$ low power consumption. All transistors are operating in strong inversion. It takes Gm-Enhancement techniques to compensate gm, which is lowered by Bulk-Driven technique and has an Wide swing current mirror for low voltage operation and a Class-A output. The second type is a Two-stage OTA designed to operate with a 0.8-V VDD and It has 52nW low power consumption and 112dB high gain. The current mirror uses Composite Transistor binding Gates of two MOSFET to raise Rout which is similar with cascode structure. The third type is a Two-stage OTA designed to operate with a 0.6-V VDD and It has 160nW low power consumption and 72dB high gain. It takes Level Shift technique by Common Gate structure to amplify signals without additional bias voltage at second stage.