• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.177-185
• /
• 2014

This study focused on effects of patient exposure dose reduction with AEC (Auto Exposure Control) marker that is designed for showing location of AEC in X-ray Chest radiography. It included 880 adults who have to use Chest X-ray Digital Radiography system (DRS, LISTEM, Korea). AEC (Ion chambers are posited in top of both sides) are used to every adult and set X-ray system as Field size $17{\times}17inch$, 120kVp, FFD 180cm. 440 people of control group are posited on detector to include both sides of lung field and the other 440 people of experimental group are set to contact their lung directly to Ion chamber (making marker to shows location). Then, measured every DAP and, estimated patient effective dose by using PCXMC 2.0. The average age of control group (M:F=245:195) is 53.9 and the average BMI is 23.4. BMI ranges from under weight: 35, normal range: 279, over weight: 106 to obese: 20 and average DAP is 223.56mGycm2, Mean effective dose is 0.045mSv. The average age of experimental group (M:F=197:243) is 53.7 and the average BMI is 22.7. BMI ranges from under weight: 34, normal range: 315, over weight: 85 to obese: 6 and average DAP is 207.36mGycm2, Mean effective dose is 0.041mSv. Experimental group shows less Mean effective dose as 0.004mSv (9.7%) than control group. Also, patient numbers who got over exposure more than 0.056mSv (limit point to know efficiency of AEC marker) is 65 in control group (14.7%), 19 in experimental group (4.3%) and take statistics with t-Test. The statistical difference between two groups is 0.006. In order to use proper amount of X-ray in auto exposure controlled chest X-ray system, matching location between ion chamber and body part is needed, and using AEC marker (designed for showing location of ion chamber) is a way to reduce unnecessary patient exposure dose.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.144-150
• /
• 2006

Chemical characteristics and their interrelationships of 156 soils included by 74 sandy loam and 82 loam soils collected from plastic film house in Chungbuk area were investigated from 1998 to 2001. Seventeen chemical properties including pH, organic matter (OM), electrical conductivity (EC), inorganic nitrogen, available phosphorus, exchangeable cations, CEC, etc., were analyzed by correlation, standardized partial regression coefficient, and principal factor analysis. Standardized partial regression coefficients of chemical properties were estimated to determine the degree of contribution of EC and OM contents in soils. Principal factor analysis was applied to classify the studied chemical properties into different groups having similar chemical properties. The pH of experimental soils ranged from 4.24 to 7.14 and 4.95 to 7.35 for loam and sandy loam soils, respectively. The EC of soils varied from 0.93 to $15.65dS\;m^{-1}$ for loam and $0.91{\sim}22.30dS\;m^{-1}$ for sandy loam soils, respectively with significant differences among them. The EC measured by 1:5 $H_2O$ dilution method and saturation method were significantly related with 8.163 and 8.599 as the slopes of regression equation for loam and sandy loam soils, respectively. These slopes more than 8.0 in this regression equation was higher than the slope of 5.0 that is estimated from dilution coefficient suggesting that EC measured by 1:5 dilution method might be erratic. The standardized partial regression coefficient of different chemical properties for the estimation of EC was in the order of $NO_3{^-}$ > $Cl^-$ > OM > exchangeable Mg for loam soils and $NO_3{^-}$ > exchangeable Mg > $Cl^-$ for sandy loam soils. Contribution order of the chemical properties based on standardized partial regression coefficient differed 1:5 dilution method and saturation method, indicating that different chemical compounds might be present in the extract solutions of these two methods. Consequently the measurement of EC by saturation method was thought be still better for estimation of chemical property because accuracy of EC measurement by 1:5 dilution method can't be improved by any specific coefficient for adjustment of EC. Regardless of differences in soil textures and extraction methods, correlation coefficients between EC and the other chemical properties were routinely in the order of $NO_3{^-}$ > $Cl^-$ > degree of base saturation > exchangeable Mg > exchangeable Ca > $SO{_4}^{2-}$. The principal factor analysis revealed four factor groups of the chemical properties studied. The groups for sandy loam were as follows; ; 1. salt components, 2. soil reaction components, 3. fixed and adsorption components, 4. CEC components. The groupings of loam soils were similar to sandy loam except that exchangeable Na substituted the CEC of sandy loam.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.2
• /
• pp.94-101
• /
• 2015

To mitigate the greenhouse gas emission, many carbon capture and storage projects are underway all over the world. In Korea, many studies focus on the storage of $CO_2$ in the offshore sediment. Assurance of safety is one of the most important issues in the geological storage of $CO_2$. Especially, the assessment of possibility of leakage and amount of leaked $CO_2$ is very crucial to analyze the safety of marine geological storage of $CO_2$. In this study, the leakage of injected $CO_2$ through fault was numerically studied. TOUGH2-MP ECO2N was used to simulate the subsurface behavior of injected $CO_2$. The storage site was 150 m thick saline aquifer located 825 m under the continental shelf. It was assumed that $CO_2$ leak was happened through the fault located 1,000 m away from the injection well. The injected $CO_2$ could migrate through the aquifer by both pressure difference driven by injection and buoyancy force. The enough pressure differences made it possible the $CO_2$ to migrate to the bottom of the fault. The $CO_2$ could be leaked to seabed through the fault due to the buoyancy force. Prior to leakage of the injected $CO_2$, the formation water leaked to seabed. When $CO_2$ reached the seabed, leakage of formation water stopped but the same amount of sea water starts to flow into the underground as the amount of leaked $CO_2$. To analyze the effect of injection rate on the leakage behavior, the injection rate of $CO_2$ was varied as 0.5, 0.75, and $1MtCO_2/year$. The starting times of leakage at 1, 0.75 and $0.5MtCO_2/year$ injection rates are 11.3, 15.6 and 23.2 years after the injection, respectively. The leakage of $CO_2$ to the seabed continued for a period time after the end of $CO_2$ injection. The ratios of total leaked $CO_2$ to total injected $CO_2$ at 1, 0.75 and $0.5MtCO_2/year$ injection rates are 19.5%, 11.5% and 2.8%, respectively.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.429-435
• /
• 2009

Purpose: The purpose of this study was to assess the prognostic value of preoperative FDG-PET in colorectal cancer (CRC) patients with hepatic metastasis (HM). Materials and Methods: 24 CRC patients (M:F=14:10; age, $63{\pm}10$ yrs) with HM who had undergone preoperative FDG PET were included. Cure-intent surgery was performed in all the patients and HMs were controlled using resection (n=13), radio-frequency ablation (RFA) (n=7), and resection plus RFA (n=4). Potential prognostic markers tested were maxSUV of primary tumor, maxSUV of HM, maxSUV ratio of HM over primary tumor (M/P ratio), histologic grade, CEA level, venous/lymphatic/nerve invasion, T stage, N stage, no. of HM, no. of lymph node metastasis, and treatment modality of HM. Results: 14 CRC patients developed a recurrence with a median follow-up duration of 244 days, whereas 10 patients did not develop recurrence with a median follow-up duration of 504 days. M/P ratios but other potential prognostic markers were significantly higher in the recurrent patients ($0.72{\pm}0.14$) than recurrence-free patients ($0.54{\pm}0.23$) (p=0.038). M/P ratio only was found to predict recurrence by Cox multivariate analysis (hazard ratio 37.7, 95% confidence interval 2.01-706.1, p=0.016). The 11 patients with lower M/P ratio of <0.61 had significantly better disease-free survival rate than the 13 patients with higher M/P ratio (${\geq}0.61$) (p=0.026). Conclusion: maxSUV ratio of HM over primary tumor (M/P ratio) may be useful for prognosis prediction of CRC patients with HM. Higher FDG uptake of HM than that of primary tumor may indicate a more advanced status in stage IV CRC.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.66-75
• /
• 2014

This study aims to understand environmental factors that determine spatial distribution of macrozoobenthic community in the southern area (ca 100-500 m depth) of East Sea, Korea, known as a candidate site for carbon storage under the seabed. From sixteen locations sampled in the summer of 2012, a total of 158 species were identified, showing density of $843indiv/m^2$ and biomass of $26.2g\;WW/m^2$, with increasing faunal density towards biologically higher diverse locations. Principal component analysis showed that a total of 33 environmental parameters were reduced to three principal components (PC), indicating sediment, bottom water, and depth, respectively. As sand content was increasing, number of species increased but biomass decreased. Six dominant species including two bivalve species favored high concentrations of ${\Omega}$ aragonite and ${\Omega}$ calcite, indicating that the corresponding species can be severely damaged by ocean acidification or $CO_2$ effluent. Cluaster analysis based on more than 1% density dominant species classified the entire study area into four faunal assemblage (location groups), which were delineated by characteristic species, including (A) Ampelisca miharaensis, (B) Edwardsioides japonica, (C) Maldane cristata, (D) Spiophanes kroeyeri, and clearly separated in terms of geography, bottom water and sediment environment. Overall, a discriminant function model was developed to predict four faunal assemblages from five simply-measured environmental variables (depth, sand content in sediment, temperature, salinity and pH in bottom water) with 100% accuracy, implying that benthic faunal assemablages are closed linked to certain combinations of abiotic factors.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1060-1065
• /
• 2006

Non-invasive evaluation of liver function in animal models remains a challenge. Hepatoscintigraphy provides information about changes in liver size and shape, and enables to understand general liver function. Futhermore it is readily used to diagnosis complications of liver transplantation like hepatitis, rejections and biliary complications. In this study, we investigated the usefulness of evaluating the liver function in miniature pigs with $^{99m}Tc-Tin$ colloid and $^{99m}Tc-DISIDA$ which are the most commonly used radiopharmaceuticals in human medicine. In result, $^{99m}Tc-Tin$ colloid was uptaked in lung, liver, gastric wall and kidney in miniature pigs. And $^{99m}Tc-DISIDA$ showed continuous uptake images of heart, lung, liver, gallbladder and duodenum, and it was similar to human's. Therefore we could conclude $^{99m}Tc-Tin$ colloid would not be suitable for evaluating hepatic function because of it's nonspecific affinity, however $^{99m}Tc-DISIDA$ scintigraphy would be an effective method for detecting hepatobiliary function in miniature pigs.

• Korean Journal of Environment and Ecology
• /
• v.29 no.3
• /
• pp.431-440
• /
• 2015

This study investigated the correlation between the trees planted on the slope of the first landfill where the landfill was completed and the soil environment. 69 plots (($7{\sim}20m{\times}5{\sim}20m$) were planted with 26 kinds of major trees in the first landfill slopes for vegetation survey. The survey was conducted from 2007 to 2009. Soil analysis from 2007 to 2008 was made on the basis of the injured index and the indicator species were selected. Depending on the rate of growth of the indicator species, seven survey locations were selected for soil sample analysis. 10 tree species appeared to adapt to the landfill environment. Among them, the coniferous trees were Pinus thunbergii (Seedling) and Juniperus chinensis and the deciduous trees were Quercus aliena, Salix preudo-lasiogyne, Castanea crenata (Seedling), Prunus armeniaca var. ansu, Quercus acutissima, Chionanthus retusus, Liriodendron tulipifera (Seedling) and Celtis sinensis. 8 species of trees did not adapt well to the landfill environment. Among them, two kinds were coniferous, the other six kinds were deciduous. In addition, judgment on the other 8 species of trees as to whether they adapted well or not was postponed. The species for which judgment was postponed included one coniferous tree and seven deciduous trees. Indicator species of injured index was the species that have more than 25 % of the defect. The soil was collected from where Catalpa ovata, Sophora japonica, Albizzia julibrissin and Acer palmatum were planted for analysis. According to the soil analysis, the soil pH showed that the soil was alkaline. Regarding the three phases of the soil, most sample soil showed 60 % for the solid phase or 55 % for the solid phase but with less than 10 % of gas phase. The organic matter content was found to be 0.14 to 2.52 %.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.99-112
• /
• 2000

The Iksan Jurassic Granite shows relatively less fractures and homogeneous rock fabrics, and is one of the most popular stone materials for architectures and sculptures. Almost mutually perpendicular rift, grain, and halfway in the Iksan Jurassic Granite are well known to quarrymen based on its splitting directions, and therefore it should exhibit orthorhombic symmetry. Theoretically, there are 9 independent elastic stiffness coefficients $(C_{1111},\;C_{2222},\;C_{3333},\;C_{2323},\;C_{1313},\;C_{1212},\;C_{1122},\;C_{2233},\;and\;C_{1133})$ for orthorhombic anisotropy. In order to characterize the static and dynamic elastic properties of the Iksan Jurassic Granite, triaxial strains under uniaxial compressive stresses and ultrasonic velocities of elastic waves in three different polarizations are measured. Both experiments are carried out with six directional core samples from massive rock body. Using the results of experiments and the densities measured independently, the static and dynamic elastic coefficients are computed by simple mathematical manipulation derived from the governing equations for general anisotropic media. The static elastic coefficients increase ar uniaxial compressive stress rises. Among those, the static elastic coefficients at uniaxial compressive stress of a 24.5 MPa appear to be similar to the dynamic elastic coefficients under ambient condition. Although some deviations are observed, the preferred orientations of microcracks appear to be parallel or subparallel to the rift, the grain, and the hardway from microscopic observation of thin sections. This indicates that the preferred orientations of microcracks cause the elastic anisotropy of the Iksan Jurassic Granite. The results are to be applied to the effective use of the Iksan Jurassic Granite as stone materials, and can be used for the non-destructive safety test.

• The Korean Journal of Ecology
• /
• v.27 no.6 s.122
• /
• pp.325-333
• /
• 2004

Birds were censused to investigate the composition of landscape structure for bird diversity around Ulsan between May and November 2002. Associations with three main categories of habitat variables were evaluated: 1) amount and type of forest; 2) residual habitats not classified as forest or crops; 3) land-use variables. Cluster analysis of bird community shows the highest forest variables of $79.06\%$, and the others are residual habitat variables ($17.98\%$), land-use variables ($2.94\%$) in spring, and forest variables of $57.77\%$, land-use variables ($23.16\%$), residual habitat variables ($18.47\%$) in autumn, respectively. In Principal Component Analysis of a total of 196 sites, the populations are strongly correlated to Component I ($54.8\%$) based forest habitats and to Component II based on land-use. Species preferring sites were clearly separated with heterogenous forest along the first axis. In autumn, the populations are moderately correlated to Component I based land-use and to component II based forest habitats. Species preferring local habitats were also clearly separated. Fifty three species of 1,700 birds were recorded: Brown-eared Bulbul, Vinous-throated Parrotbill, Great Tit, Tree Sparrow and Black-billed Magpie accounted for over $60\%$ of the observed birds in spring and autumn. The important species were Brown-eared Bulbul, Vinous-throated Parrotbill, Great Tit and Tree Sparrow in spring and autumn. Four habitats in terms of their species richness were computed as follows: Wonhyosan has the highest an expected species number, $E[S_{59}]=19$. Moonsusan has the lowest expected species number, $E[S_{59}]=17$ in spring. In autumn, Kuenamsan has the highest expected species number, $E[S_{63}]=16$. Moonsusan has the lowest expected species number, $E[S_{63}]=12$. Pairwise similarity declined with increasing distance between recording site and recording site from Moonsusan-Wonhyosan (0.62), the same geographical regions clustered separately in a UPGMA cluster tree in spring, and in autumn from Moonsusan-ChungJoksan (0.53).