• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.161-167
• /
• 2001

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate to investigate the characteristics of fatigue properties with tension and bending loading of a high carbon steel wire. The fatigue behaviors have been carried out by tension-tension, 4 points bending and 3 points bending loading. In the present study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodmans theory and we investigated S-N diagram for bending and tensile loading.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.945-946
• /
• 2011

This paper presents design and characteristics analysis of transverse flux switched reluctance generator(TFSRG) for wind turbine. Dimension is calculated by using output equation and maximum magnetomotive force(mmf) equation per pole. Design specification within effective range of mechanical and electrical energy is suggested in order to perform the analysis. it is confirmed to torque, inductance and induced electromotive force(emf) for one phase through three dimension Finite Element Analysis. Then design specification can be verified by comparing with proposed specification.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1009-1014
• /
• 2001

This study is to develop the end anchorage of external steel reinforcement of RC slab bridges. External prestress method using the existing steel is that When the anchorage is installed in slab end, a plenty of anchor bolts were required because the only tangential stress of anchor bolt received a tendon force. Then, for this reason, the wide end anchorage was required and the shape was complicate. But this reinforcement method using method that inserts anchor key at concrete surface cut a groove gets big internal force comparing to the anchorage using existing anchor bolt. Furthermore, the number of anchor bolt for installing apparently will be reduced, and the operation will be convenient because a small anchorage of a simple shape will be received a great tendon force.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.411-416
• /
• 2002

With a rapid industrialization, repair and strengthening methods for a damaged bridges are raised a head in face of safety and reduction of physical distribution costs of bridges. Above all, external prestressing method has the high adaptability for concrete structures and the reliable effect of strengthening. Innovative ideas for bridges strengthening were considered along with established methods. That methods are identified, described. However there is not a systematic and categorized manual for external prestressing method. This study will provide a systematic and reliable manual with investigating the arrangement shape of cable and characteristics of brackets. And the key result of this study is an extensive compilation, which can be used by practicing engineers, of the most effective techniques for strengthening existing bridges.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.246-248
• /
• 2009

본 논문에서는 장력 검출 장치(로드셀, 댄서 등) 가장착되어 있는 생산 설비에서 강선, 강판, 제지, 섬유, 비닐 등과 같은 소재의 장력을 정밀하게 제어하기 위한 인버터의 장력 제어 전용 PID 제어기와 직경 또는 소재의 두께를 실시간으로 추정하여 인버터의 출력 주파수를 보정하는 추정기를 제안한다. 본 논문에서 제안된 방법을 다양한 용량(0.37kW~160kW) 대의 인버터에 탑재하여 실제 부하에 적용함으로써 산업 현장에서 요구하는 수준이상의 우수한 제어 성능을 나타냄을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.976-981
• /
• 2009

MEMS capacitive gap sensor is developed for measuring abrasion depth of gun barrel rifling. Measuring abrasion depth of gun barrel rifling is very important because it is related with exactness of firing and life of arms. The method using a gap sensor is not to hurt rifling. And it can measure abrasion depth through minimum shooting, because the developed gap sensor can measure from $1{\mu}m{\sim}12{\mu}m$ using Polydimethylsiloxane(PDMS) material and making a stretchable electrode on PDMS. And it's resolution is 1 ${\mu}m$ using capacitive method and MEMS technology.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.636-640
• /
• 2002

Acoustic coupled combustion instability, which is one of the most undesirable phenomena in the development of liquid propellant rocket engine, can cause serious damage to a rocket itself, and must be avoided by all means. Unfortunately, KSR-III rocket went through combustion instability during engine start at the propulsion test article No.2. To resolve the problem, time sequence (cyclogram) has been changed, and baffle system has been applied. In consequence of change, stable combustion was achieved.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.64-68
• /
• 2001

본 연구에서는 (1) 인테리어에 대한 감성어휘모형을 도출하고, (2) 거실 인테리어의 주요 배색을 추출한 후, (3) 거실 공간의 배색 감성모형을 개발하였으며, (4) 연구결과를 토대로 거실 인테리어 디자인을 위한 배색기법을 제시하였다. 이를 위하여 인테리어를 기술하는 감성어휘를 수집하고 이들로부터 대표적 감성어휘를 추출, 감성어휘척도를 구성하였다. 감성조사분석을 통해 '따뜻하다-차갑다'(제 1차원), '고급스럽다-소박하다(제 2차원)', '현대적이다-고전적이다'(제3차원)의 세 차원축이 도출되었고, 이렇게 도출된 감성공간 상에 감성어휘들을 대응시키고, 9개의 감성 범주로 구분함으로써 감성어휘모형을 개발하였다. 한편, 거실 인테리어의 주요 배색을 추출하여 배색자극물을 개발하고, 감성어휘모형과의 관계분석을 통해 거실 공간의 배색 감성모형을 개발하였다. 최종적으로, 배색 감성모형에서 도출된 9개의 감성범주와 그에 대응하는 배색을 기반으로 하여 거실용 인테리어 디자인의 핵심이미지에 따른 배색지침을 제시하였다.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.85-92
• /
• 1988

To avoid external facial scar which resulted from ordinary infraorbital and lateral eyebrow incision in surgical treatment of zygomatic tripod fractures, the author used intraoral incision and K-wire fixation method in 37 selected patients. This method contraindicated for the patient with multiple comminuted zygomatic fracture, patient combined with hard palatal fracture, and patient combined with herniated orbital floor fracture. The advantages of this method are simple, no external facial scar, and operate under direct visual field. The postoperative results were satisfactory. Balanced facial symmetry and good cosmetic results were obtained.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.96-96
• /
• 2003

우주발사체라 함은 지구상의 물체를 우주, 즉 지구의 중력이 영향을 미치지 못하는 대기권 밖으로 운반하는 수단을 말한다. 이를 위해 다양한 추진방식이 제안되었고 연구되고 있으나 현재까지 실용화 된 것은 화학연료를 연소시킴으로 인해 발생하는 추진력으로 지구 중력을 이겨내는 방식이다. 또한 발사체 구성에서 추진기관분야는 전체 성능을 좌우할 정도로 큰 비중을 차지하고 있다. 따라서 이에 대한 최적화 및 성능 검증은 필수적이다. 추진기관에 대한 성능 검증기법은 우주발사체 기술이 발달해 옴에 따라 해석적 방법, 비 연소 모사시험 등 다양하게 제시되고 있으나, 우주발사체용 추진기관의 연소현상을 예측 및 모사하는 것이 쉽지 않고 구축된 데이터가 적기 때문에 발사체 개발 단계의 최종 검증 차원에서 연소시험을 실시하는 것이 일반적이다. 한국 최초의 우주발사체라 평가되고 있는 KSR-III 로켓의 경우에도 다양한 해석기법과 모사시험을 통해서 성능 예측을 하였으나, 역시 최종 성능 검증을 위해 10여회의 연소시험을 실시하였다. 본 논문을 통해 저자는 KSR-III 개발과정에서 수행된 10회의 연소시험의 수행 과정과 결과를 기술, 정리 및 평가하여 향후 진행될 우주발사체 개발 사업의 기초로 삼고자 한다.