• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8274-8283
• /
• 2015

Gas springs of the television is to control the piston speed when operating under along stroke(200~300 mm, television elevation)is possible. User by this principle is capable of elevation adjustment. First carried out a flow analysis of the piston. A piston speed adjustment technique for precise pipe type cross-section was examined. The piston structure for flow rate control and elevation action is proposed. This study is the development of a gas spring of more than 50 inch television with a large television stand. Hollow piston rod for optimal control(the outer diameter 19.9 mm, the inner diameter 13.9 mm) was injected into the nitrogen gas(0.3 mm/s) in. As a result, the flow rate the pressure drop of the piston rod as the increase was increased without any change of the external force. As a result, control of the displacement via the gas spring is possible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.112-118
• /
• 1984

Inverase was entrapped in calcium alginate gel. The immobilized beads had excellent uniform size and configuration. To screen the optimal conditions possessing high enzyme activity, effects of sodium alginate concentration, $CaCl_2$ concentration, and the incubation time of beads in $CaCl_2$ solution during the immobilization procedure were investigated. Immobilized beads prepared from the optimal conditions had 18.8 units per ml of gel, which is equivalent to 68% of the activity of soluble enzyme. Several kinetic parameters were determined: Km value. 143 mM; optimum pH, 4.5; optimum temperature, $50^{\circ}C$. Enzyme loading capacity was 150 mg per 20 ml gel. No significant decrease in sugar conversion was observed during the column operation for 6 days.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.195-200
• /
• 2013

Novel Sr-Y-Si-Oxynitride yellow phosphors were synthesized and the effect of calcination temperature, reduction temperature and $Eu^{2+}$ concentration on their luminescence properties were studied. Optimal temperature conditions were found to be $1400^{\circ}C$ and $1300^{\circ}C$ for solid-state reaction and reduction, respectively. The synthesized $Ba_9Y_{2+y}Si_6O_{24-3y}N_{3y}:Eu^{2+}$ phosphors showed a single intense broadband emission in the range of 571~587 nm for 450 nm excitation light source. The highest luminescence intensity was obtained with Eu concentration of 3 mol% and concentration quenching was observed beyond 5 mol%. FE-SEM and PSA showed that the synthesized phosphors consists of particles with an average size of ${\sim}8.2{\mu}m$.

• Composites Research
• /
• v.33 no.5
• /
• pp.288-295
• /
• 2020

Fiber-reinforced composite laminates have high specific stiffness and strength and are expected to be useful for weight reduction in weight-sensitive industries, such as automotive and aerospace. However, designing composite laminates is often dependent on designer's experience and intuition because of difficulties in determining the number of plies and stacking sequence, which tends to lead to over-design. In this study, optimal design of composite laminates was performed to minimize weight, while withstanding the given load. Based on the enumeration method, all combinations of stacking sequence satisfying the design guideline for composite laminates were considered. Composite laminates were discretized into panels. Optimal number of plies and stacking sequence for each panel were determined considering local load on each panel and contiguity across adjacent panels. Failure index from Tsai-Wu criteria was optimized for strength and buckling analysis was performed for compressive load. Stacking angles of 0, ±45 and 90° were used.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1239-1243
• /
• 2014

This paper presents the application of carbon-fiber-reinforced polymer (CFRP) for the damage absorption and optimal design of portable smart devices to close in life. CFRP specimens are subjected to a tensile test to estimate their mechanical properties in terms of the stacking angles. Further, the screw reverse torque and screw torque at each stacking angle are determined using a torque tester after tapping holes on the CFRP specimens. Two experiments are performed for comparing their results in order to determine optimal conditions. In the tensile test, a woven specimen is found to have the highest strength and stiffness. In the case of the woven specimen, no difference is observed even when it is applied to prevent loosening of the coating. And average result value was excellent.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2008

The goal of rotator cuff repairs is to achieve high initial fixation strength, minimize gap formation, maintain mechanical stability under cyclic loading and optimize the biology of the tendon-bone interface until the cuff heals biologically to the bone. Single row repairs are least successful in restoring the footprint of the rotator cuff and are most susceptible to gap formation. Double row repairs have an improved load to failure and minimal gap formation. Transosseous equivalent repairs (suture bridge technique) have the highest ultimate load and resistance to shear and rotational forces and the lowest gap formation. Even though the superior advantages of double row and transosseous equivalent repairs, those techniques take longer surgical time and are more expensive than single row repairs. Therefore single row repairs can be useful in bursal side partial thickness or small size full thickess rotator cuff tear.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1292-1295
• /
• 2009

일반적으로 유역의 기저유출 산정에는 적용의 간편성을 이유로 수평직선분리법, N-day법등을 주로 사용해 왔으며 이를 단기호우사상에 대한 모의에 적용해 왔다. 그러나 수평직선분리법이나 N-day에의한 기저유량의 산출은 연구자의 주관성이 반영될 수 있는 가능성이 다분하며 총 유출에 대한 기저 유출의 기여가 상대적으로 크게 되는 장기유출모의에 이용하기에는 효율적이지 못할 뿐 아니라 분석을 수행하는 사람에 따라서 그 결과에 많은 차이가 있을 수 있다. 그래서 최근에는 이러한 문제를 해결하기 위해서 다양한 'Digital Filtering' 방법이 수문곡선 분리에 많이 사용되고 있다. Eckhardt 필터는 출력의 신호대 잡음비가 최소화를 목적함수로 사용하는 최적선형필터의 형태를 갖고 있으며, BFImax 변수 값을 이용하여 수문분석 시 대수층별 특성을 반영할 수 있는 장점을 지니고 있다. 따라서 BFImax 변수 값에 따라서 분리된 직접유출과 기저유출 값에는 상당한 차이가 발생할 수 있는데, 정확한 수문분석을 위해서는 연구대상 유역 내 대수층의 특성에 가장 부합되는 BFImax 변수 값을 구하여야 하는 어려움이 있다. 이러한 문제를 해결하기 위하여 감수곡선 분석방법과 최적화 기법을 이용하여 BFImax 변수 값을 결정해 주는 모듈을 사용하고 있다. 금강유역의 수문곡선분리를 위해 먼저 금강 유역 내 관측소의 강우 및 수위 일 자료를 수집하고 수위자료는 동향, 옥천, 천천, 청성, 호탄지점의 자료를 이용하였다. 관측단위는 일 단위를 사용하였다. 분리된 수문곡선에 대한 검증은 지하수관측이나 중간유출에 대한 관측에 한계가 있기 때문에 정량적인 검증은 쉽지 않은 상황이고 수문곡선에 대한 시각적 판단에 의지하고 있다. 하지만 효과적인 기저유출분리가 가능해진다면 하천 건천화에 대한 정확한 진단과 함께 기후변화에 따른 지하수 및 지표수 영향에 대한 보다 신뢰도 있는 전망이 가능해지므로 매우 중요한 연구 분야라 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2004

Mechanical design process is generally accomplished by design, analysis, and test. Designers use programs fitting purpose, and obtain repeatedly a response of a simulation program, a sub-program for optimization. In this paper, shape optimization using approximate optimization technique is carried out with sequential design domain(SDD). In addition, algorithm executing Pro/Engineer and ANSYS automatically are adopted in the approximate optimization program by SDD. It is difficult for design problem to be approximated accurately for the whole range of design space. However, more or less accurate approximation is constructed if SDD is applied to that case. SDD starts with a certain range which is off-seted from midpoint of an initial design domain and then SDD of the next step is determined by a move limited. Convergence criterion is defined such that optimal point must be located within SDD during the two steps. Also, the PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm is used to solve approximate optimization problems. This algorithm uses the second-order information and the active set strategy, in order to seek the direction of design variables.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2933-2942
• /
• 2015

This paper proposes a new method which traces significant element of 2-dimensional natural images and encrypts them by using Fresnelet transform (FRNLT). After analyzing property of the subbands obtained by the FRNLT, we estimated the information for ciphering 2D images. Considering FRNLT levels, energy of subbands, and visual effect, we estimated the optimized point for encryption. By selecting various levels and encrypting region, we can encrypt 2D image with various robustness. Encryption effectiveness was showed by analyzing numerical result, executing time for encryption, area of encrypted region, and visual observation. Therefore encryption for various application can be applied by using the suggested parameters without additional analysis. Identifying the experimental result, in the case of $L_{TH}=4$ and $L_{TH}=4$, an image was not recognized through encrypting only 0.42% among the entire data.