• Composites Research
• /
• v.33 no.6
• /
• pp.371-376
• /
• 2020

The adhesive strength can be improved through surface treatment. The most common method is to improve physical bonding by varying the surface conditions. This study presents the effect of laser surface treatment on the adhesive strength of CFRP. The surface roughness was patterned using a 1064 nm laser. The effects of the number of laser shots and the direction and length of the pattern on the adhesion of the CFRP/CFRP single joint were investigated through tensile tests. Tests according to ASTM D5868 were performed, and the bonding mechanism was determined by analyzing the damaged surface after a fracture. The optimized number of the laser shots and the optimized depth of the roughness should be required to increase the bonding strength on the CFRP surface. When considering the shear stress in the tensile direction, the roughness pattern in the direction of 45° that increases the length of the fracture path in the adhesive layer resulted in an increase of the adhesive strength. The surface treatment of the bonding surface using a laser is a suitable method to acquire a mechanical bonding mechanism and improve the bonding strength of the CFRP bonding joint. The study on the optimized laser process parameters is required for utilizing the benefits of laser surface processing.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.83-97
• /
• 2002

An experimental model which considers post-peak behaviors and pre-peak damage characteristics representing changes of elastic moduli in each damage level was developed. From experiments, some damage thresholds of rocks were determined, and regression analyses were carried out in order to represent changes of elastic moduli in each damage level as functions of confining pressure. In addition, it was intended to simulate post-peak behaviors with Hoek-Brown constants, $m_r\;and\;s_r$ for post-failure. The developed experimental model was implemented into $FLAC^{2D}$ by a FISH function. From results of parametric studies on Hoek-Brown constants for post-peak, it was revealed that uniaxial compressive strength more highly depends upon $s_r$, although it depends on both $m_r\;and\;s_r$. It was also shown that the post-peak slopes of stress-stain curves depend mainly on $m_r$. When the optimum models obtained from parametric studies were applied to numerical analysis, they predicted maximum strengths obtained from experiments and well simulated stiffness changes due to damage levels.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.39-43
• /
• 2002

The eutectic solder Sn-37Pb and the lead free solder alloys with the compositions of Sn-0.7Cu, Sn-3.5Ag, Sn-3.5Ag-0.75Cu, Sn-2.0Ag-0.7Cu-3.0Bi were applied to the 48 BGA packages, and then it was discussed for the shear strength at the solder joints as the hardness and the composition of the small solder ball. As a result of experiments, the high degree of hardness with the displacement of 0.043 mm was obtained in Sn-2.0Ag-0.7Cu-3.0Bi. The shear strength of the lead free solder was higher than that of Sn-37Pb solder, and it can be obtained the maximum value of about 52% in Sn-2.0Ag-0.7Cu-3.0Bi.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.18-22
• /
• 2015

This paper presents the stress strength safety of LPG steel cylinder for various corner radiuses of upper round end plate and lower round end plate by using a finite element method. The FEM analyzed results indicate that the most influential elements is a corner radius of upper round end plate and lower round end plate rather than a thickness of LPG cylinder. But, the thickness of a steel cylinder is an important design element considering for a weight reduction of a cylinder. Thus, this paper recommends that the LPG steel cylinder thickness is 2.3~2.6mm and the corner radius of upper round end plate and lower round end plate is over 157mm as an optimum design for the maximum testing pressure of 3.04MPa.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.332-335
• /
• 2011

원적외선, 음이온 방출과 항균, 탈취, 난연등의 효과를 가지는 황토를 합성수지와 혼합하여 복합소재를 연구하여 환경 친화적인 특징과 원적외선, 음이온의 방출을 이룰 수 있는 복합소재 조성을 연구하였다. PP는 MI가 2~60이고, TPE로 Ethylene계을 사용하였으며, 황토와 PP의 혼련을 도와주기 위하여 MA-g-PP를 첨가하였고, 활제, 분산제 및 산화방지제를 첨가하여 compounding 하였다. 또한 황토의 종류에따라 적황토, 호황토, 홍토, 백토, 흑토등으로 구분되고, 각각의 황토 마다 다양한 종류의 입도를 가지고 있으며, 또한 환경 친화적이며 난연성을 부여하기 위하여 다양한 조성으로 compounding 하였다, 황토의 종류에 따른 복합재료의 물성으로부터 기계적 특성치, 원적외선 방사율, 난연성등을 확인하고, 친환경 난연 복합소재 기술을 연구하였다. 적황토의 경우 황토의 함량이 많을수록 인장강도는 작아지는 경향을 나타냈으며, 입도가 작을수록 인장강도가 커지는 경향을 나타냈다. 파단신율의 경우 적황토(#2000)에서 가장 양호하게 나타났으며, 굴곡강도, 충격강도의 경우 적황토(#5000)에서 MI 의 경우 적황토(#325)에서 양호하게 나타났다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.79-90
• /
• 2004

Systematical robust stability analysis and design scheme for the feedback linearization control systems via fuzzy modeling are proposed. It is considered that uncertainty and disturbances are included in the Takagi-Sugeno fuzzy models representing the nonlinear plants. Robust stability of the closed system is analyzed by casting the systems into the diagonal norm bounded linear differential inclusions and by converting the analysis and design problems into the linear matrix inequality optimization, a numerical method for finding the maximum stable ranges of the fuzzy feedback linearization control gains is also proposed. To verify the effectiveness of the proposed scheme, the robust stability analysis and control design examples are given.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.315-327
• /
• 2002

The main objective of this study is to develop an discrete optimization algorithm of plane steel frames with rigid using second-order-elastic-plastic hinge analysis which is considering panel zone. Conventional analyses of steel frame are usually tarried out without considering the effect of panel zone deformation on frame behavior The validity of this model is established by comparison without panel zone on joint models is analyzed numerically to demonstrate the importance of using realistic models in steel frame analysis. The objective function is taken as Weight of steel frames and the constraints we formulated based on AISC-LRFD(1994). The validity of the developed algorithm we demonstrate by comparing the result with those of SAP2000. The result of the study indicates that the optimal design algorithm considering of panel zone behavior more economic design than simple steel frame design methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.1-11
• /
• 2002

The optimal AP placement for wireless LAN is important factor for improving service quality and reducing cost. Decision of AP placement is depend on radio signal strength, environment factor and logical area property, which is user's frequently posed place. This paper proposes optimal multiple AP placement method based on radio prediction tool. The proposed method can get flexibility in multiple AP placement using user defined parameter and the optimization design uses Hopfield network algorithm. And path-loss model is used for one of radion prediction model. The result of simulation shows that it is efficiently reduces the process to find optimal AP placement. And the proposed optimization design of multiple AP placement can improve service quality for wireless LAN.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.83-91
• /
• 1999

Taking a view of joining by welding the IN713C to SCM440 and SCM415 steel in production of turbochargers, the frictin welding process may be utilized as a new approach for joining them of other conventional welding processes. It is because the friction welding has more technical and technical and economic advantages than the other welding processes. As this welding process has the characteristics such as curtaliment of production time and materials and cost reduction, etc.. So, this paper deals with determining the preper friction welding condition and analyzing various mechanical properties of friction welded joints of the super heat resisting steel to alloy stee(IN713C to SCM440 and SCM415). And the in-process real-time weld quality evaluation technique by acoustic emission during friction welding of IN713C to SCM440 and SCM415 steels with higher confidence and relibility has been much required even though it might be the first trial approach for developing it. Then, this first study aimed to develop the optimization of dissimilar friction welding of heat resisting steels (INC713 to SCM440, SCM415) for turbine, considering on strength and toughness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.85-89
• /
• 2005

도시발달과 인구증가로 인해 오늘날의 수자원 관리와 계획은 복잡하고 그 중요성은 더욱더 커지고 있으며, 인구와 재산의 집중현상으로 인하여 사소한 수문재해로 인해 막대한 인명과 재산피해를 초래될 수 있다. 이런 이유들로 인해 정확한 수문예측과 이를 통한 적절한 수자원 관리는 그 어느 때보다 중요한 인자로 인식되고 있다. 본 연구에서는 수문예측을 통한 소규모 댐으로의 정확한 월유입량 예측을 실시하여 실측유입량과 비교$\cdot$분석함으로서 수자원관리의 효율성을 향상시키고자 하였다. 수문예측을 위해서 확률론적 예측이 가능한 앙상블 예측기법(Ensemble Prediction Method)을 적용하였으며 과거 1968-1997년까지의 강우데이터와 수정 TANK모형을 이용하여 1998부터 2002년까지의 성주댐의 월유입량 앙상블을 생성하였다. 수문예측뿐만 아니라 유입량예측의 정확성을 향상시키기 위해 수정 TANK모형의 매개변수를 최적화기법 중의 하나인 유전자알고리즘을 이용하여 매개변수를 최적화하였으며 평창강유역과 보청천유역의 실측데이터를 이용하여 모형의 검증을 실시하였다. 또한 강우발생시 과소하게 유출량이 산정되는 것을 보완하기 위해 매개변수를 평수기와 홍수기의 구분하여 모형을 적용하였다. 본 연구에서 제시된 앙상블 예측기법과 최적화된 수정 TANK모형을 이용하여 댐의 수자원을 관리한다면 효율적인 관리가 이루어 질 것으로 판단된다.