• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.55-55
• /
• 2022

수공구조물을 설계하고 수자원 관리 정책을 수립하기 위해 일반적으로 IDF (Intensity-Duration-Frequency) 곡선을 활용한다. 통상 IDF 곡선은 연최대치계열을 통계적으로 분석하여 재현빈도 마다의 적절한 강우강도를 추정하여 결정한다. 신뢰할 수 있는 결과를 산출하기 위해 최소 30년 이상의 정상 강우자료의 통계분석이 권장되나, 긴 재현기간의 최대강우강도는 본질적으로 확률분포 함수로부터 추정한 값이라는 한계가 있다. 한편, 우리나라에서 종관기상관측을 통해 고해상도의 지상관측 강수자료가 장기간 누적되어 관측자료로부터 직접 최대강우강도-지속시간 사이의 관계식을 도출할 수 있게 되었다. 따라서, 실무에서 널리 사용되고 있는 '홍수량 산정 표준 지침'의 확률강우 분석 결과를 오랫동안 관측된 강우자료에서 찾은 최대강우강도와의 비교가 가능해졌다. 본 연구에서는 우리나라에서 50년 이상 강우가 관측된 24개의 지점에 대해 최대강우강도-지속기간 관계식을 분석하였다. 이 결과를 바탕으로 통계적으로 추정한 IDF 곡선이 실제 관측자료에서 나타난 최대강우강도를 얼마나 정확하게 추정하는지 검증해 보았다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.95-104
• /
• 2004

The horizontally curved bridges have been used to connect bridges and roads. Until 1960s, they had been constructed with straight girders, called 'kinked girder bridges', which requires much cost and time-consuming construction of substructure. In case of using curved girders, practiced later, they would have many advantages such as reduction in the total construction cost and time, and ability to make aesthetic bridges. In designing plate girder bridges, it is necessary to determine the spacings between vertical stiffeners and the allowable shear stresses based on shear buckling capacity because it plays a key role in preventing the premature local shear buckling. Compared with the straight web, the critical shear buckling stresses of curved web panels vary with both aspect ratio and curvature coefficient. For designing curved web panels, a simplified formula and shear buckling coefficients were proposed by parametric models with F.E.M in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.727-734
• /
• 2006

Although a limited number of experimental investigations and finite element analyses revealed that a curved web panel in practical design has a considerable reserve strength after the elastic buckling as a straight girder web panel, the current Guide Specifications for Horizontally Curved Steel Girder Highway Bridges (AASHTO, 2003) do not consider the postbuckling strength in the ultimate shear strength due to lack of a comprehensive study. In this study, the ultimate shear strength behavior of horizontally curved steel web panels was investigated through nonlinear finite element analysis and experimental test. It was found that curved web panels used in practical designs are able to develop the postbuckling strength that is equivalent to that of straight girder web panels having the same dimensional and material properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.1
• /
• pp.21-28
• /
• 2008

Stress-strain curves based on Ramberg-Osgood and Hollomon relations are strongly dependent upon the regressed range of strain. This work investigates mathematical expressions of true stress-strain curves of metallic materials. We first observe the variation of yield strength, strain hardening exponent and stress-strain curve with regressed range of stain. Based on sectional regression and expression using one or two parameters, we propose an optimal strain range for which yield strength and nonlinear material behavior are quite appropriate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.735-742
• /
• 2006

In this study, the ultimate shear strength behavior of transversely stiffened curved web panels was investigated through nonlinear finite element analysis. It was found that if the transverse stiffener has a sufficient rigidity, then curved web panels used in practical designs are able to develop the postbuckling strength that is equivalent to that of straight girder web panels having the same dimensional and material properties. The nonlinear analysis results indicate that in order for curved web panels to develop the potential postbuckling strength. The rigidity of the transverse stiffener needs to be increased several times the value obtained from the Guide Specifications (AASHTO, 2003). However, in the case of thick web panels where the shear design is governed by shear yielding, the stiffener rigidity does not have to be increased. From the analysis results, a simple design formula is suggested for the rigidity of transverse stiffener under strength limit state.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.127-134
• /
• 2009

This study investigated their properties of spalling resistance and residual compressive strength after fire test corresponding to various ISO, RABT heating curves, and contents of hybrid organic fiber of high strength concrete. The results were summarized as following. As fundamental characters of concrete with hybrid organic fiber, the flowability was directly declined as the increase of fiber contents, and air contents were decreased or increased a little bit, but there was not big difference. The compressive strength was gradually declined sluggishly at 28 days. As properties of fire resistance, in case of RABT heating curves, compare with ISO heating curves a spalling aspect showed till range that has much contents of hybrid organic fiber, but they are mostly peeling spalling, which means spalling aspect didn't happen to inside. In conclusion, in case of W/B 25% high strength concrete, the spalling was prevented over 0.04% of contents of fiber at ISO heating curve and over 0.10% of contents of fiber at the RABT heating curve. In case of spalling was prevented, mass reduction rate according to the change of heating temperature curves showed around 7% at ISO heating curves and around 9% at RABT heating curves. The residual compressive strength rate corresponding to the change of heating temperature curves showed 50%~60% at ISO heating temperature curves and 30%~35% at RABT heating temperature curves in case of spalling was prevented.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.6
• /
• pp.33-44
• /
• 2011

The shape of an inelastic demand spectrum may have a major impact on the seismic evaluation results of a structure. The inelastic demand spectrum could be obtained by scaling down from the elastic response spectrum by applying the strength reduction factor (SRF). This study has investigated formulas for SRFs that were suggested by numerous previous studies. This paper compares their characteristics, including the shapes of the curves of the SRFs and the inelastic demand spectra that were produced by applying the various formulas for SRFs. The mean curve was computed from the SRF curves generated by the various formulas. This study derives a new formula for the SRF curve through regression analysis. From the comparative study, it is shown that the proposed formula for the SRF can generate the mean curve of the inelastic demand spectra which have been previously suggested by others.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.49-60
• /
• 2010

The actual hysteretic behavior of structural elements and systems is smooth. Smooth hysteretic behavior is more representative of actual behavior than bi-linear or piece-wise linear stiffness degrading models. The strength reduction factor in seismic design is used to reduce the elastic strength demand to design levels. In this study, the effect of smoothness on the strength reduction factor is evaluated for several smooth hysteretic systems subjected to near-fault and far-fault earthquakes. For design purposes, a simple expression of the strength reduction factor considering hysteretic smoothness and earthquake characteristics, represented as near-fault and far-fault earthquakes, is proposed. The strength reduction factors calculated by the proposed simple formulation are more similar to the factors directly obtained from inelastic response spectrum analyses than those calculated by several existing formulas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.101-101
• /
• 2022

IDF (Intensity-Duration-Frequency) 곡선에서 익숙하다시피 강우지속시간과 최대강우강도는 반비례한다. 그동안 이러한 관계를 살펴보는 것은 대개 수십 시간의 규모에 그쳤다. 이 연구에서는 과연 시계열에서 시간 규모를 계속 증가시키면서 해당 시간 동안의 최대강우강도가 어떻게 변하는지를 살펴보았다. 가능한 장기간의 강수관측이 이루어진 우리나라 24개 지점을 대상으로 시간 규모를 최장 한 세기까지 키우면서 최대강우강도의 변화를 분석하였다. 작은 시간 규모에서는 그 관계가 멱함수를 따르지만, 시간 규모가 점차 늘어나면서 최대강우강도는 설계 목적의 지속시간 범위에서 결정된 멱함수 또는 기존 IDF 곡선으로부터 외삽하기 어려워진다. 이러한 변화는 점차 정상 연강수량으로 점근하는 결과를 가져온다. 분석된 결과를 토대로 연 단위를 초과하는 지속시간에 걸친 최대강우강도의 감쇄를 적절하게 표현할 수 있는 함수식을 제시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.368-368
• /
• 2021

기후 변화로 인한 극한사상의 크기와 빈도 변화를 예측하는 것은 수공 인프라 설계에 있어 주된 관심사 중 하나이다. 보통 극한사상에 대한 강도, 빈도, 지속시간에 대한 정보가 필요하며, 이는 일반적으로 IDF(Intensity-Duration-Frequency) 곡선으로부터 추출된다. 최근 CMIP(Coupled Model Intercomparison Project) 6단계에서 새로운 이산화탄소 배출 시나리오와 업데이트된 기후모델을 이용하여 미래의 기후에 대한 예측 시계열을 발표했으므로, 미래 기후 변화 시나리오를 기반으로 IDF 곡선을 새로 추정하고 미래 기간의 변화를 평가할 필요가 있다. 본 연구에서는 한국의 40개 지역에 대해 일단위 자료를 시단위로 축소(downscaling)한 후, 확률론적 일기생성기(stochastic weather generator)를 이용하여 30년 시단위 시계열을 100개의 앙상블로 생성하였다. 생성된 시계열로부터 연최대강수량 시계열을 재구성하여 GEV 분포와 gumbel 분포에 적용하였다. 적합도 검정(Anderson-Darling(AD) 검정 및 Kolmogorov-Smirnov(KS) 검정)을 수행하였으며, 과거 자료를 기반으로 생성된 IDF 곡선과 비교 검증하였다. CMIP5의 기후변화 자료를 사용한 결과와 CMIP6 기후변화의 결과를 비교하였으며, 본 연구의 주요 결과는 다음과 같다. (1) 향후 강우 강도는 증가할 것이며 강우 강도의 증가는 말기에 현저하게 관찰될 것이다. (2) 시간별 강우 강도의 미래 변화가 일단위 강우 강도보다 더 크다. (3) 강우 강도의 불확실성을 정량화하기 위해 앙상블을 사용해야 한다. (4) 강우 강도의 미래 변화에 대한 공간적인 경향이 확인된다. 시단위 시계열 앙상블을 생성하여 추정된 IDF 곡선에 대한 정보는 기후 변화의 영향을 평가하고 적절한 적응 및 대응 전략을 개발하는 데 도움이 될 것이다.