• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.210-221
• /
• 2008

The mesoscale environmental surveys were conducted between $5^{\circ}N\;and\;17^{\circ}N$ mainly along the $131.5^{\circ}W$ meridian from 1997 to 2002 to investigate controlling factors of carbon and nitrogen contents in bottom sediments. Sediments of the study area showed zonal distribution pattern depending on latitudinal position and can be classified into four types; calcareous ooze($5{\sim}6^{\circ}N$), siliceous sediments($8{\sim}12^{\circ}N$), pelagic red clay($16{\sim}17^{\circ}N$), and mixed sediments($7^{\circ}N$). Inorganic carbon(IC) contents varied depending on water depth and carbonate compensation depth(CCD). Carbonate materials were well preserved in the low latitude region, where water depths are shallower than CCD. In contrast, the higher latitude region dominated by siliceous sediment and pelagic red clays has low productivity in water column as well as the water depths deeper than CCD. Thus, most of carbonate materials were dissolved, which resulted in IC contents of less than 0.05% in the sediments. Organic carbon(OC) and total nitrogen contents(TN) in siliceous sediments were higher than in pelagic red clay sediments simply because of higher primary productivity in the siliceous sediment dominated area. The contents of OC and TN were lower in the calcareous ooze than in the siliceous sediments. It is attributed to the high input of calcareous material to the bottom due to relatively shallow water depth of the area, which diluted organic matter contents in the sediment. Overall results indicated that water depth relative to CCD, primary production in water column, and sedimentation rate largely controls the large-scale distribution of carbon and nitrogen contents in the study area.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.2
• /
• pp.51-61
• /
• 2010

Surface particulate organic carbon (POC) concentration was measured in the Northeastern Gulf of Mexico on 9 cruises from November 1997 to August 2000 to investigate the seasonal and spatial variability related to synchronous remote sensing data (Sea-viewing Wide Field-of-view Sensor (SeaWiFS), sea surface temperature (SST), sea surface height anomaly (SSHA), and sea surface wind (SSW)) and recorded river discharge data. Surface POC concentrations have higher values (>100 $mg/m^3$) on the inner shelf and near the Mississippi Delta, and decrease across the shelf and slope. The inter-annual variations of surface POC concentrations are relatively higher during 1997 and 1998 (El Nino) than during 1999 and 2000 (La Nina) in the study area. This phenomenon is directly related to the output of Mississippi River and other major rivers, which associated with global climate change such as ENSO events. Although highest river runoff into the northern Gulf of Mexico Coast occurs in early spring and lowest flow in late summer and fall, wide-range POC plumes are observed during the summer cruises and lower concentrations and narrow dispersion of POC during the spring and fall cruises. During the summer seasons, the river discharge remarkably decreases compared to the spring, but increasing temperature causes strong stratification of the water column and increasing buoyancy in near-surface waters. Low-density plumes containing higher POC concentrations extend out over the shelf and slope with spatial patterns and controlled by the Loop Current and eddies, which dominate offshore circulation. Although river discharge is normal or abnormal during the spring and fall seasons, increasing wind stress and decreasing temperature cause vertical mixing, with higher surface POC concentrations confined to the inner shelf.

• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2024

In this study, an AI-based algorithm was developed to prevent image quality deterioration and reading errors due to patient movement in PET/CT examinations that use radioisotopes in medical institutions to test cancer and other diseases. Using the Mothion Free software developed using, we checked the degree of correction of movement due to breathing, evaluated its usefulness, and conducted a study for clinical application. The experimental method was to use an RPM Phantom to inject the radioisotope 18F-FDG into a vacuum vial and a sphere of a NEMA IEC body Phantom of different sizes, and to produce images by directing the movement of the radioisotope into a moving lesion during respiration. The vacuum vial had different degrees of movement at different positions, and the spheres of the NEMA IEC body Phantom of different sizes produced different sizes of lesions. Through the acquired images, the lesion volume, maximum SUV, and average SUV were each measured to quantitatively evaluate the degree of motion correction by Motion Free. The average SUV of vacuum vial A, with a large degree of movement, was reduced by 23.36 %, and the error rate of vacuum vial B, with a small degree of movement, was reduced by 29.3 %. The average SUV error rate at the sphere 37mm and 22mm of the NEMA IEC body Phantom was reduced by 29.3 % and 26.51 %, respectively. The average error rate of the four measurements from which the error rate was calculated decreased by 30.03 %, indicating a more accurate average SUV value. In this study, only two-dimensional movements could be produced, so in order to obtain more accurate data, a Phantom that can embody the actual breathing movement of the human body was used, and if the diversity of the range of movement was configured, a more accurate evaluation of usability could be made.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.7-13
• /
• 2023

Purpose: In this study, we evaluated the effect of using a customized bolus on dose delivery in the treatment plan when cervical cancer protruded out of the body along with the uterus and evaluated reproducibility in patient set-up. Materials & Methods: The treatment plan used the Eclipse Treatment Planning System (Version 15.5.0, Varian, USA) and the treatment machine was VitalBeam (Varian Medical Systems, USA). The radiotherapy technique used 6 MV energy in the AP/PA direction with 3D-CRT. The prescribed dose is 1.8 Gy/fx and the total dose is 50.4 Gy/28 fx. Semiflex TM31010 (PTW, Germany) was used as the ion chamber, and the dose distribution was analyzed and evaluated by comparing the planned and measured dose according to each position movement and the tumor center dose. The first measurement was performed at the center by applying a customized bolus to the phantom, and the measurement was performed while moving in the range of -2 cm to +2 cm in the X, Y, and Z directions from the center assuming a positional error. It was measured at intervals of 0.5 cm, the Y-axis direction was measured up to ±3 cm, and the situation in which Bolus was set-up incorrectly was also measured. The measured doses were compared based on doses corrected to CT Hounsfield Unit (HU) 240 of silicon instead of the phantom's air cavity. Result: The treatment dose distribution was uniform when the customized bolus was used, and there was no significant difference between the prescribed dose and the actual measured value even when positional errors occurred. It was confirmed that the existing sheet-type bolus is difficult to compensate for irregularly shaped tumors protruding outside the body, but customized Bolus is found to be useful in delivering treatment doses uniformly.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.

• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.1
• /
• pp.5-30
• /
• 2024

The purpose of this study is to extract topics from experimental data using the topic modeling methods(LDA, Top2Vec, and BERTopic) and compare the characteristics and differences between these models. The experimental data consist of 55,442 papers published in 85 academic journals in the field of library and information science, which are indexed in the Web of Science(WoS). The experimental process was as follows: The first topic modeling results were obtained using the default parameters for each model, and the second topic modeling results were obtained by setting the same optimal number of topics for each model. In the first stage of topic modeling, LDA, Top2Vec, and BERTopic models generated significantly different numbers of topics(100, 350, and 550, respectively). Top2Vec and BERTopic models seemed to divide the topics approximately three to five times more finely than the LDA model. There were substantial differences among the models in terms of the average and standard deviation of documents per topic. The LDA model assigned many documents to a relatively small number of topics, while the BERTopic model showed the opposite trend. In the second stage of topic modeling, generating the same 25 topics for all models, the Top2Vec model tended to assign more documents on average per topic and showed small deviations between topics, resulting in even distribution of the 25 topics. When comparing the creation of similar topics between models, LDA and Top2Vec models generated 18 similar topics(72%) out of 25. This high percentage suggests that the Top2Vec model is more similar to the LDA model. For a more comprehensive comparison analysis, expert evaluation is necessary to determine whether the documents assigned to each topic in the topic modeling results are thematically accurate.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.29 no.1
• /
• pp.28-41
• /
• 2024

The carbon balance serves as a valuable indicator of a plant's physiological status under diverse environmental conditions. We investigated the photosynthetic and respiratory responses of the Asian surfgrass Phyllospadix iwatensis along the northeast coast of the Korean peninsula in response to changing water temperature (ranging from 5℃ to 30℃) to estimate the seasonal whole-plant carbon balance through a series of incubation experiments. The maximum gross photosynthetic rate (P_max) showed a significant difference among the temperature treatments, while there was no significant difference in photosynthetic efficiency (α). The maximum gross photosynthetic rate of P. iwatensis reached its peaks at 20℃ treatment (101.65 μmol O₂ g^-1 DW h^-1) but decreased rapidly at 30℃. The saturation irradiance (I_k), compensation irradiance (I_c), and respiration rate (R) of P. iwatensis exhibited significant differences among the temperature treatments. The saturation irradiance increased up to 20-25℃ (121.59-124.50 μmol photons m^-2 s^-1) and sharply decreased at 30℃. The compensation irradiance and respiration rate increased steadily with rising water temperature. The ratio of P_max to R (P_max:R ratio) was the highest at 5℃ but dramatically decreased at 30℃. The whole-plant carbon balance, calculated based on photosynthetic parameters, respiration rates, and biomass, exhibited distinct seasonal variation, increasing during winter and spring and decreasing during summer and fall, which is consistent with the highest in situ growth in spring and severely limited growth at the highest water temperature conditions. Phyllospadix iwatensis displayed a negative carbon balance during late summer, fall, and winter, but demonstrated a positive carbon balance during spring and early summer. Our findings suggest that the rising seawater temperatures associated with climate change may lead to significant alterations in the seagrass ecosystem functioning along the rocky shores of the Korean east coast.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.343-352
• /
• 2007

The present study aims to investigate the design standard for acoustic criteria of Korean traditional music which could be used for the design of Korean traditional music halls. In order to do this, subjective listening tests were undertaken to musicians using auralized sounds which were convolved with the impulse response of traditional instruments recorded in an anechoic chamber. 94 pairs of sound were made which have different value of acoustic parameters including RT, BR, Brilliance, G, C80, ITDG, IACC. A paired comparison method(PCM) was used to analyze the results from the subjective listening tests. The results show that the preference of acoustic criteria for the Korean traditional music is far different from those of western music. As a result, specific range of acoustic criteria were suggested for the appropriate acoustic conditions of Korean traditional music. Also, a guideline of the acoustic design of halls for performing the Korean traditional music was suggested which could be used as a basic reference in the future works.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.273-284
• /
• 2024

This study investigates the impact of international oil price fluctuations on overseas construction orders secured by domestic and foreign companies. The analysis employs statistical data spanning the past 20 years, encompassing international oil prices, overseas construction orders from domestic firms, and new overseas construction orders from the top 250 global construction companies. The correlation between these variables is assessed using correlation coefficients(R), determination coefficients(R²), and p-values. The results indicate a strong positive correlation between international oil prices and overseas construction orders. The correlation coefficient between domestic overseas construction orders and oil prices is found to be 0.8 or higher, signifying a significant influence. Similarly, a high correlation coefficient of 0.76 is observed between oil prices and new orders from leading global construction companies. Further analysis reveals a particularly strong correlation between oil prices and overseas construction orders in Asia and the Middle East, potentially due to the prevalence of oil-related projects in these regions. Additionally, a high correlation is observed between oil prices and orders for industrial facilities compared to architectural projects. This suggests an increase in plant construction volumes driven by fluctuations in oil prices. Based on these findings, the study proposes an entry strategy for navigating oil price volatility and maintaining competitiveness in the overseas construction market. Key recommendations include diversifying project locations and supplier bases; utilizing hedging techniques for exchange rate risk management, adapting to local infrastructure and market conditions, establishing local partnerships and securing skilled local labor, implementing technological innovations and digitization at construction sites to enhance productivity and cost reduction The insights gained from this study, coupled with the proposed overseas expansion strategies, offer valuable guidance for mitigating risks in the global construction market and fostering resilience in response to international oil price fluctuations. This approach is expected to strengthen the competitiveness of domestic and foreign construction firms seeking success in the international arena.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.148-155
• /
• 2024

This study investigated the ecological characteristics of Odontobutis platycephala at Jaho stream from January to December 2022. The riverbed structure of the species' habitat was rich in cobble and pebble. The water was deep, ranging from 22 to 153 cm, with an average of 64 cm, and the stream velocity was rapid at 0.89 (0.42-1.46) m/sec. The ratio of females to males was 1:1.02, and the total length of collected individuals ranged from 38 to 156 mm. The age according to the total length frequency distribution as of May indicated that the group with a total length of 38-69 mm was one year old, the group with 60-99 mm was two years old, the group with 100-139 mm was three years old, and the group 140-156 mm was four years or older. As a secondary gender characteristic, the genital papilla was cylindrical in females and cone-shaped with a pointed tip in males. Some females with a length ranging from 60 to 69 mm and all females 70 mm or longer were sexually mature. Some males with a length ranging from 70 to 79 mm and all males 80 mm or longer were sexually mature. The spawning season was from May to July, and the water temperature was between 17 ℃ and 28 ℃ during that period. The prosperous spawning season was June (24 ℃). The average number of eggs in the ovaries was 988 (284-2,722) per mature female, and the mature eggs were yellowish and spherical with a mean diameter of 1.46 (1.19-1.71) mm. The correlation between total length and body weight is BW=0.00000006TL^3.12 with the constant a as 0.00000006 and the parameter b as 3.12. The mean condition factor (K) was 1.44 (0.96-2.26), and the slope was negative at -0.0007