• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.125-126
• /
• 2006

송수신 사이의 거리가 가까운 GPR 시스템들과 같이 신호가 빨리 감쇄되는 산란 측정시스템에서는 송신신호의 왜곡을 줄여 산란체의 신호를 정밀하게 찾아내는 것이 매우 중요하다. 여기에 주로 사용되는 광대역 안테나는 안테나의 급전점과 끝부분의 개방단 사이에서 다중 반사가 일어나서 입력신호의 왜곡으로 인한 떨림현상이 일어나게 되는데, 본 논문에서는 리액턴스 장하를 통해 안테나의 내부 반사를 줄인 초광대역 안테나를 설계하고 제작하여 특성을 측정하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.308-315
• /
• 2009

Because the attenuation of AE signal in composite materials is relatively higher than that of metallic materials, it is required to develop a damage assessment technique less affected by the attenuation property of composite materials in order to use AE sensing as a damage detection method. In the signal processing procedure, it is profitable to use the leading wave that arrives first because the leading wave is less influenced by the boundary conditions. Using wavelet transform, we investigated the frequency characteristics of impact induced AE signals focused on the leading wave in advance and chose the key factors to discriminate the damaged condition quantitatively. In this research, we established a damage assessment technique using the sharing percentage of the wavelet detail components of AE signal, and conducted a low-velocity impact test on composite laminates to confirm the feasibility of the proposed signal processing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2844-2850
• /
• 2015

Rolling noise caused by the contact between the train wheels and rails is the main factor of noise generated by the operation of railway, therefore the features of rail vibration and its correlations with noise radiation should be identified. In this study, noise radiation generated from vibration were predicted by utilizing FE model with boundary element method. Noise radiation generated from vibration were predicted by utilizing FE model with boundary element method, and were compared with the measured noise in order to validate the reliability of the analysis method. In addition, the features of noise radiation according to the rail attenuation were examined in the frequency domain, and the noise radiation has been reduced by approximately 3dB(A) with additional rail damping.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2011

In this study, we investigated the effect of the simplification for high frequency region in Head-Related Transfer Function(HRTF) on the sound localization. For this purpose, HRTF was measured and analyzed. The result in the HRTF frequency characteristic of the back sound source showed that the decrease revel of high frequency was smaller than that of low frequency region, which means the possibility of simplification in the high frequency region. Simplification was performed by flattening of the high frequency amplitude characteristics with the insertion of the low-pass filter, whose cutoff frequency is given by boundary frequency. Auditory experiments were performed to evaluate the simplified HRTF. The result showed that direction perception was not influenced by the simplification of the frequency characteristics of HRTF for the error of sound localization. The rate of confusion for the front and back was not affected by the simplification of the frequency characteristics over 8kHz of HRTF. Finally, we made it clear that the sound localization was not affected by the simplification of frequency characteristics of HRTF over 8kHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.753-759
• /
• 2014

This paper introduces the reduction design technique of the resonance phenomenon of the inner PCB based on power integrity from the analysis about the inner power supply line generating RLC resonance. With the technique, the resonant frequency resulted from the structural characteristics of the PCB can be analyzed and allows to predict and the capacitor for resonance phenomenon reduction can be decided as a decoupling capacitor. From the simulation result, it was confirmed that the PCB's resonance phenomenon reduction design technique should have the reduction effect in the inner motherboard of the industrial controller. This research will be contributed to the improvement of the safety of a PDN (Power Delivery Network) structure in the layout design technique of the PCB.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.557-565
• /
• 2018

For GNSS navigation in urban environment, a novel short delay multipath mitigation algorithm is proposed in this paper. This algorithm detects which satellite's signal is the multipath signal by using the constraint that GNSS receiver is equipped in a ground vehicle, then estimate new position after separating the measurement of that satellite. A criterion for detecting and validating the multipath signal depends on the performance grade of the GNSS receiver and the dynamics of the vehicle. In order to evaluate the proposed algorithm, the real data had been collected at the multipath environment of 4 scenarios. By post-processing the real data with both of the multipath mitigation algorithm in the receiver and the proposed algorithm, it can be checked that the position errors were less than 5 meters except the case that the number of visible satellite is lower than 5.

• Annual Conference of KIPS
• /
• 2000.04a
• /
• pp.884-889
• /
• 2000

본 논문에서는 원영상의 주파수특성 성형에 의한 오차확산 영상이진화 기법을 제안하였다. 오차확산에 의한 영상이진화 처리에서 이진화영상에 내재하고 있는 에지정보의 열화를 감쇄하기 위한 방법으로 원영상의 주파수특성을 활용하는 기법을 도입하였다. 주파수특성은 원영상에서 수평방향과 수직방향으로 얻고, 이들 각각에 가중치를 부여하였다. 수평과 수직의 주파수특성을 성형한후, 영상이진화 기법에서 양자화처리 수행시 이를 활용하였다. 주파수특성 성형을 위한 필터는 2종을 제안하여 적용하였다. 제안한 필터를 적용한 오차확산 영상이진화 처리를 수행한 후, 실험결과를 고찰시 이진화영상의 평탄영역은 기본특성을 유지하면서 에지정보의 특성이 부각되는 주관적인 화질특성이 얻어짐을 확인할 수 있었다.

• Proceedings of the Speleological Society Conference
• /
• 2005.11a
• /
• pp.69-77
• /
• 2005

비 직선적 정(+) 저항온도계수 특성을 갖은 PTC thermistor눈 전이온도(큐리점) 부근에서 온도변화에 대하여 극히 큰 저항 값의 변화를 나타내는 산화물계반도체 저항기(또는 발열체)로써, 일반적으로 반도체의 온도-저항 특성과 같이 상온영역에서 온도의 상승과 함께 부성저항 특성을 나타내어 감소하다가, 온도가 점점 증가하여 큐리점 부근에 도달하면 저항이 급격히 증가하는 독특한 특성을 갖는다. Perovskite 구조의 BaTiO$_3$를 주성분으로 미량의 Dopant를 첨가하여 도전성을 갖게 한 N형 반도체의 일종으로, 저항-온도 특성, 전류-전압 특성, 전류감쇄 특성 등을 이용하여 과전류 보호회로, 히터, TV 소자회로(degausser) 모터기동회로, 온도센서, 정온발열기기 등으로 널리 사용된다. 본 연구는 큐리점 부근의 급격한 저항변화 현상과 결정입계의 전위장벽 형성 및 그에 따른 정온발열 기능의 상관성으로부터 정온발열 탐사기능 온열부츠 제작 용 PTC 부픔소재의 응용성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.240-241
• /
• 2005

비 직선적 정(+) 저항온도계수 특성을 갖는 PTC thermistor는 전이온도(큐리점) 부근에서 온도변화에 대하여 극히 큰 저항 값의 변화를 나타내는 산화물계반도체 저항기(또는 발열체)로써, 일반적으로 반도체의 온도-저항 특성과 같이 상온영역에서 온도의 상승과 함께 부성저항 특성을 나타내다가 온도가 점점 증가하여 큐리점 부근에 도달하면 저항이 급격히 증가하는 독특한 특성을 갖는다. Perovskite 구조의 $BaTiO_3$를 주성분으로 미량의 Dopant를 첨가하여 도전성을 갖게 한 N형 반도체의 일종으로 저항-온도 특성 전류-전압 특성, 전류감쇄 특성 등을 이용하여 과전류 보호회로, 히터, TV 소자회로(degausser), 모터기동회로, 온도센서, 정온발열기기 등으로 널리 사용된다. 본 연구는 큐리점 부근의 급격한 저항변화 현상과 결정입계의 전위장벽 형성 및 그에 따른 정온발열 기능의 상관성으로부터 그 응용성을 조사하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.