• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.505-512
• /
• 1996

CANDU에서 감속재온도제어기는 칼란드리아 출구에서의 감속재온도를 일정하게 유지하기 위한 제어 프로그램이다. 본 연구에서는 강속재온도제어 알고리즘의 성능을 분석하기 위하여 주감속재계통의 동특성모델식을 적용하여 모의실험을 수행하였다. Setback 모의실험에 대하여는 설정온도를 적절히 유지하였으나, Stepback 모의실험에 대하여는 설정온도를 크게 벗어나는 오버슈트를 나타내었다. 되먹임제어기의 PID 파라메타를 최적화하고, 정상상태모델에 근거하여 앞먹임제어기의 설계를 개선함으로써 Stepback 모의실험에서 나타난 오버슈트를 줄일 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.31-42
• /
• 2019

Among the driving information recorded in the event data recorder (EDR), the speed information of the vehicle before the traffic accident is a very important factor that determines the punishment of the driver of the accident vehicle, the identification of the offender and the victim, and the possibility of avoiding the accident. Also, by analyzing the EDR data, the deceleration of the accident vehicle can be analyzed. In this study, the results of the braking test of the previous study and the analysis of the EDR data of the traffic accident vehicle were compared to suggest an appropriate deceleration value applicable to the calculation of the stopping distance. As a result of the braking test of the vehicle equipped with ABS of the previous study, the average deceleration of the vehicle was 0.79g ~ 0.94g. In addition, the deceleration value was calculated from 0.92g to 0.94g in the recent automobile safety evaluation braking test conducted by the Korea Automobile Testing & Research Institute. In addition, the deceleration value of 0.55g ~ 0.71g was calculated through the analysis of EDR data performed in this study, and the value was smaller than the deceleration value measured in the braking experiment of the previous study.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.69-70
• /
• 2012

유도 전동기를 제어하기 위한 일반적인 상용인버터는 다이오드 정류부, 평활용 Cap부, 인버터부로 구성된다. 시스템의 설계에 따라 가감속을 선정 할 수 있으며 산업현장에서는 부하의 관성이 큰 경우에 빠른 감속이 요구되는 경우가 있다. 상용 인버터는 감속 시 소비되는 에너지 외에 회생에 사용되며 회생 에너지에 비례하여 DC 링크 전압이 커지는데 이는 인버터의 소손 원인이 된다. DB유닛으로 이 문제를 해결해 줄 수 있지만 가격적인 부담을 가지고 있다. 부하의 관성이 크고 감속시간이 짧은 경우 DC 링크 과전압 방지를 위해 모터 출력의 정격에 맞는 출력지령을 내보내는 기술에 경제형 상용 인버터 시스템에 맞게 지령을 조정하는 부분을 추가하여 본 논문의 감속기법을 제안하였다. 이 방법은 DB유닛을 사용하지 않았으며, 실험을 통해 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.609-614
• /
• 2017

In this study, a new type of eccentric cam was used for the development of a small size reducer with a two-shift reduction ratio while maintaining the same volume as the existing one-shift speed reducer. Therefore, a two-shift speed reducer was designed using the concept of a continuously variable transmission applied to automobiles. The cam was designed to have an eccentric shape with a $180^{\circ}$ phase difference to act as a tensioner to minimize slip by squeezing the V-belt connected to the deceleration pulley and the acceleration pulley, respectively. The cam was designed to have a diameter of 35mm and an outer diameter of 18mm so that the outer portion of the v-belt could contact the cam perfectly. A pulley with a diameter of 50.8mm was installed on the low speed pulley input shaft for deceleration and a pulley with a diameter of 76.2mm was provided on the output shaft. In the high-speed pulley for acceleration, a pulley with a diameter of 76.2mm is provided on the input shaft, and a pulley with a diameter of 50.8mm is provided on the output shaft. Based on the design details, the power transmission efficiency test and the heating characteristics of the transmission were tested to verify the feasibility. In addition, through validation, the suitability of the reducer was demonstrated.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.9-16
• /
• 2010

The purpose of this study is to establish how drivers react on different pavement markings in a driving simulator for speed reduction. For this, forty one people between the ages of twenty and seventy took part in this experiment. A study analyzed which patterns are effective to reduce a speeding. As a results, 'Peripheral Transverse Lines II' were the most effective treatment for reducing driving speeds in the driving simulator. This study carries an important meaning when presenting the effectiveness of speed reduction for perceptual countermeasure based on the human factors. Further research will be required to determine the long term effectiveness of these countermeasures due to concerns over drivers becoming too accustomed to implemented markings. Also, the color contrasts (for example, dark asphalt with white markings) can be considered.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.537-543
• /
• 2012

In this study, we experimentally investigate a noise mechanism related to the machining accuracy of the reducer in the driving state. We fabricate a planetary reducer and four types of gears for use in the planetary reducer. We use signal analysis to determine the noise and vibration of the reducer at different motor speeds; the motor speed is increased from 0 rpm to the maximum speed in a stepwise manner. In addition, we obtain the sound level by using a sound level meter. The machining accuracy of gears is evaluated by public organizations, Korea Testing Laboratory (KTL), on the basis of the Japanese Industrial Standard (JIS). We analyze and compare the results with the noise and vibration of the reducer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.189-196
• /
• 2012

The heavy moderator acts as the ultimate heat-sink in an operating CANDU reactor. HUKINS has been developed to investigate moderator flow patterns. HUKINS consists of a 38.4-mm-thick cylindrical shell with a 0.95 m inner diameter and 88 sus-tubes that produce a total heat of 10 kW. A chemical visualization method was selected to estimate the occurrence of typical moderator flow patterns. Momentum-dominated flow, mixed flow, and buoyancy-dominated flow are detected under conditions of a heat load of 7.7 kW and input mass flow rates of 4, 7, and 11 L/min. The experimental results are similar to the results of a CFD simulation that consisted of approximately 1.9 million grids and was conducted using the k-${\varepsilon}$ turbulence model. Therefore, both the present experiments and simulations using HUKINS, a 1/8-scale model, represent all three important flow patterns expected in the real CANDU6 reference reactor. Thus, it has been demonstrated that HUKINS could be useful in the study of CANDU6 moderator circulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.34-42
• /
• 2000

In this paper conventional technique will be described, which can be used for the measuring various parameters of induction motor. This is followed by presenting some other, alternative, techniques. The two tests are described which are suitable to obtain the electrical parameters of symmetrical 1hp three-phase squirrel-cage induction motor. These are the blocked rotor test and no load test. By the application of these, it is possible to determine the parameters which are presented in the steady-state equivalent-circuit of determining an induction motor. One conventional method of determining the inertia of an induction motors is obtained by performing retardation tests. The angular rotor speed of the motor is monitored, following its disconnection from the stator supply. Since the inertia torque J dw/dt contains the inertia coefficient J and the friction and windage torque Bw contains the coefficient B, then J and B can be determined by performing retardation tests.

• Journal of the Korean Society of Visualization
• /
• v.12 no.1
• /
• pp.18-24
• /
• 2014

The Korea Atomic Energy Research Institute (KAERI) has a scaled-down moderator test program to simulate the CANDU6 moderator circulation phenomena during steady state operation and accident conditions. In the present work a preliminary experiment using a 1/8 scaled-down moderator tank has been performed to identify the potential problems of the flow visualization and measurement in the scaled-down moderator test facility. With a transparent moderator tank model, a velocity field is measured with a Particle Image Velocimetry (PIV) technique under an isothermal state. The flow patterns from the inlet nozzles to the top region of the tank are investigated using PIV for a 1/8 scale moderator tank.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.379-380
• /
• 2014

유도 전동기의 구동을 위한 범용 인버터는 다양한 산업현장의 부하 특성에 맞게 운전 가능하도록 범용성을 지니고 있다. 다양한 부하 중 큰 관성을 가진 부하의 감속시, 혹은 주기적인 패턴으로 변하는 부하의 경우에 인버터는 감속토크를 발생시킨다. 이러한 감속토크는 인버터의 DC 링크단에 회생에너지를 유입시켜 DC 링크 전압을 상승시킨다. 그리고 전압 상승으로 인한 평활 커패시터의 소손을 막기 위해 인버터 출력을 차단시켜 정상적인 운전을 할 수 없다. 본 논문에서는 회생토크가 간헐적으로 발생되는 부하에서 별도의 장치 없이 출력주파수만을 가변하여 출력토크를 평균적으로 제어함으로써, 회생에너지에 의한 DC 링크 전압상승을 방지하는 알고리즘을 제안하였다. 그리고 22kW 유도전동기 실험을 통해 이를 검증하였다.