• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.17-25
• /
• 2014

The purpose of this paper is to present a method to estimate the storage life of propellant bag for degradation of breaking load with storage time by using gamma process model. The nitrogen compound generated by natural decomposition of propellants degrades the breaking load of propellant bag with time. The statistical distributions of condition and lifetime with time were shown from the results of accelerated life test of propellant bag cloth at $80^{\circ}C$. It was found that the use of median for life was highly appropriate and the $B_1$ or $B_5$ life should be selectively applied to the quality assurance policy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1245-1256
• /
• 2014

The physical nature of fatigue shows the considerable amount of scatter from intrinsic and extrinsic factors. In this study, some degradation models, such as the gamma process model, were reviewed in terms of uncertainties associated with the continuous, gradual, and monotonic nature of fatigue crack growth. Statistically varying fatigue crack growth data obtained from Lu and Meeker were used as an example to demonstrate the use of the gamma process model. This model can describe the condition and lifetime as statistical distribution curves whose shapes vary with cycles. From the skewness of the statistical distribution curves, it was confirmed that the median is suitable for being considered as the expected life. The use of the gamma process model enables the optimum replacement period and percentile life to be employed as criteria for preventive maintenance policy.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.212-214
• /
• 1999

방사성 동위원소를 체내에 주입한 후 감마 카메라로 방출되는 방사선을 획득하여 전기적 신호로 바꾸어 영상을 구성하고 그 획득 영상을 사용하여 유방암을 진단하는 유방 신티그라피가 최근 유방암 진단에 각광을 받고 있는 영상진단 방법이다. 그러나, 일반 감마 카메라는 주로 전신 영상 획득을 얻기 위한 것으로써 커다란 검출기를 사용한다. 이는 유방암 진단용 영상 획득에는 불필요할 뿐만 아니라 비용도 많이 드는 단점이 있다. 본 논문에서는 이러한 기존의 일반 카메라가 유방암 진단 부분에서 가지는 단점을 보완하고자 보다 정확한 유방암 진단 영상을 획득할 수 있고 저가인 PC용 소형 감마 카메라 시스템을 개발하는데 있어 필요한 신호 획득 과정과 영상 완성 과정을 설명하고 획득영상에 대한 가시적 진단을 돕기 위한 영상 표현 응용 프로그램의 확장기능들을 정의하고 구현한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1008-1012
• /
• 2005

최근 디지털 카메라, 영상관련 디지털 기기들의 증가와 DMB(Digital Multimedia Broadcasting)의 시작으로 영상 처리 분야의 중요성이 점차 높아지고 있으며, 적절히 교정하지 못한 영상은 너무 밝거나 또는 너무 어둡게 보일 수 있기 때문에 영상을 컴퓨터 스크린에 정확하게 표현하는 감마교정은 영상을 디스플레이 하는 장치에서 더 많은 비중을 차지하고 있다. 본 논문에서는 영상 입력 장치 또는 카메라 이미지 센서로부터 얻은 Bayer Data 가 전처리 과정에서 수행하는 감마교정에 대해 이해하고, ROM에 감마 값을 고정하여 수행하지 않았다. 구간 선형 알고리즘을 이용한 하드웨어적인 처리를 수행하는 감마 교정을 구현하고자 한다. 이를 위해서 Visual C++을 이용하여 소프트웨어적인 구현과 구간 선형법 알고리즘을 이용한 구현을 검증한 후, 구간 선형 알고리즘을 적용한 감마 교정을 하드웨어로 설계 후, Modelsim6.0a를 이용하여 데이터를 검증한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.33-41
• /
• 2012

The aim of the study is to investigate the method to estimate a shelf life of KM6 single base propellant by stochastic gamma process model. The state failure level is assumed that the degradation content of stabilizer is below 0.8%. The constant of time dependent shape function and the scale parameter of stationary gamma process are estimated by moment method. The state distribution at each storage time can be shown from probability density function of deterioration. It is estimated that the $B_{10}$ life, a time at which the cumulative failure probability is 10%, is 25 years and the $B_{50}$ life is 36 years from cumulative failure distribution function curve. The $B_{50}$ life can be treated as the average shelf life from the practical viewpoint and the lifetime can be expressed as distribution curve by using stochastic process theory.

• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.71-78
• /
• 2014

Gamma irradiation and its convergence with nano-silver particles and sodium dichloroisocyanurate (NaDCC) were investigated to inhibit germination and mycelial growth of Botrytis elliptica, the pathogen of lily leaf blight. In addition, the same treatments were studied on the process of disease development with detached leaf of lily cv. Siberia. Spray inoculation, which is closer to natural infection than wound inoculation, can be a way to investigate infection ability of the treated pathogen. The irradiating dose required to reduce the population by 90%, $D_{10}$, was 526 Gy irradiating with 0-2000 Gy gamma ray on the conidial suspension as well as the growing mycelia. Even at 2000 Gy, the mycelium was not killed but just delayed its growth at 1-2 days behind. Convergent treatment with 40 mg/l of NaDCC just before 200 Gy gamma irradiation was the best way to decrease the conidial germination about 1/1000 times. The control values of gamma irradiation were 23% and 19.5% at wound inoculation and spray inoculation, respectively. On wound-inoculation, the control value of NaDCC only was 89%, and that of NaDCC convergent with 200 Gy gamma irradiation was 32%. On sprayinoculation, the highest control value was NaDCC at 50%, and that of NaDCC convergent with gamma irradiation was 24%.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.168-175
• /
• 2015

In this paper, we propose FPGA design technique for rotating LED display device which is capable of displaying videos with the use of the afterimage effect. The proposed technique is made up of image data correction process based on inverse gamma correction and error diffusion, block interleaving process, and data serial output process. The data correction process based on inverse gamma correction and error diffusion is an image data correction step in which image data received are corrected by inverse gamma correction process to convert the data into linear brightness characteristics, and by error diffusion process to reduce the brightness reduction phenomenon in low-gray-level which is caused by inverse gamma correction. In the block interleaving process, the data of the frames entered transversely are first saved in accordance with entrance order, and then only the longitudinal image data are read. The data serial output process is applied to convert the parallel data in a rotating location into serial data and send them to LED Driver IC, in order to send data which will be displayed on high-speedy rotating LED Bar. To evaluate the accuracy of the proposed FPGA design technique, this paper used XC6SLX45-FG484, a Spartan 6 family of Xilinx, as FPGA, and ISE 14.5 as a design tool. According to the evaluation analysis, it was found that goal values were consistent with simulation values in terms of accurate operation of inverse gamma and error diffusion correction, block interleaving operation, and serialized operation of image data.

• Radioisotope journal
• /
• v.13 no.4
• /
• pp.62-76
• /
• 1998

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.407-417
• /
• 2004

This study is to verify radiation detection method by using $\alpha$-spectroscopy and ${\gamma}$-spectroscopy for concretes and components which will be generated during the decommissioning of the uranium conversion plant. Components and inside walls of the building were contaminated with natural uranium materials. Some parts of the stainless steel pipes and concretes of the walls were sampled and analyzed their alpha and gamma activities respectively. Alpha and gamma activities are well matched each other in the range of high activity region to 0.01 Bq/g and gamma activities are over estimated comparing alpha activities corresponded in below 0.005 Bq/g region for the natural uranium of AUC sample. The $^{238}U$ originated from natural products of conversion process could be distinguished by measuring $^{214}Pb$ or $^{214}Bi$ and $^{234}Th$ or $^{234m}Pa$. Uranium contaminations mainly are in the wall surface of the plant. Decontamination process of generating wastes which can be reached tp background level gamma activities measured by gamma spectroscopy can also be used to conservative assessment data.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.27-36
• /
• 2005

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates Per fault. This Paper Proposes reliability model using the generalized gamma distribution, which can capture the monotonic increasing(or monotonic decreasing) nature of the failure occurrence rate per fault. Equations to estimate the parameters of the generalized gamma finite failure NHPP model based on failure data collected in the form of interfailure times are developed. For the sake of proposing shape parameter of the generalized gamma distribution, used to the special pattern. Data set, where the underlying failure process could not be adequately described by the knowing models, which motivated the development of the gamma or Weibull model. Analysis of failure data set for the generalized gamma modell, using arithmetic and Laplace trend tests . goodness-of-fit test, bias tests is presented.