• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.697-703
• /
• 2023

In this study, a modified indirect evaluation method was developed to predict the deterioration level of water pipes. The accuracy of the modified method was verified by comparing it with the direct method. The weights of index were adjusted by reducing the weight of water quality corrosion, soil corrosion, lay depth and road type according to the importance of the existing evaluation factors and adding the weight of pipe thickness. In the results, the weight of pipe thickness was determined to be 0.1530. Comparing with the direct evaluation method, the accuracy of the modified indirect evaluation method increased by 31.03% compared to the indirect evaluation method. The modified indirect evaluation method will be able to select relatively old pipes more accurately and efficiently than the existing indirect evaluation method when prioritizing the improvement of old water pipes.

• The Korean Journal of Applied Statistics
• /
• v.28 no.1
• /
• pp.75-82
• /
• 2015

We discuss confidence intervals for sensitive binomial attributes obtained by a direct question method and indirect question method. The Randomized Response Technique(RRT) by Warner (1965) is an indirect question method that uses a randomization device to reduce the response burden of respondents. We used the mean coverage probability (MCP), root mean squared error (RMSE), and mean expected width (MEW) to compare the confidence intervals by the two methods. The numerical comparisons indicated found that the MEW of RRT is too large and the RRT is so conservative that the MCP exceeds a nominal level(${\alpha}$); therefore, it is necessary to complement these problem in order to increase the utility of the indirect question method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.204-204
• /
• 2023

2020년 상수도 통계에 따르면 전국 상수도 보급률은 약 99% 정도로 높은 수치를 기록하고 있으나 노후관으로 인한 관로파손 및 수질사고로 인해 효과적인 운영에는 많은 어려움이 존재한다. 이러한 문제를 해결하기 위해 기술진단 및 정밀안전진단 등 체계적인 유지관리 규정이 도입되었으며 적용되고 있으며, 이때 시스템의 정량적인 성능평가를 위해 간접평가와 직접평가로 구성된 점수평가법이 적용되었다. 간접평가는 지중에 매설된 관로를 대상으로 매설연도, 관경, 관로연장 등의 노후도인자를 통해 관의 노후도를 추정하고 간접평가 결과 3등급으로 판명되는 관로의 경우 객관적인 관의 상태를 평가하기 위해 시편채취 및 관로 내시진단 등의 직접평가가 수행된다. 하지만 관로의 직접평가는 간접평가결과 3등급의 모든 관로에 대해 수행하기에는 진단비용 및 시간 등 제약조건에 따라 모든 지점에 대한 직접평가 수행에는 한계가 있다. 따라서, 본 연구에서는 이러한 관로 성능평가 기법의 한계를 개선하기 위해 상수도시스템 통합평가 기술을 개발하였다. 개발한 기술은 머신러닝 기법을 적용하여 간접평가 및 직접평가 결과를 토대로 직접평가가 필요한 지점의 결과를 예측하였다. 이를 바탕으로 상수도시스템 평가성능 향상 및 보강 우선순위 선정 단계에서 의사결정권자의 판단에 도움이 될 것으로 판단된다.

• 전기의세계
• /
• v.31 no.9
• /
• pp.625-629
• /
• 1982

본고의 내용은 다음과 같다. 1. 적응제어의 기본 목적 2. STR과 MRAC 2.1 STR 2.2 MRAC 2.3 적응제어의 직접법과 간접법에 대하여 3. 장래의 연구과제

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.486-493
• /
• 2015

The ultrasonic nondestructive test (NDT) was applied to deck in-service to inspect and evaluate the performance of decking materials using ultrasonic pulse velocity. First, the measuring method between direct and indirect method according to transducer arrangement was studied. Second, the ultrasonic pulse velocity of decks in-service was compared with the passage of time. Finally, the change of ultrasonic pulse velocity was evaluated to expect service life of decking materials. The results of comparison between direct and indirect method was statistically insignificant and the ratio of direct to indirect method was 1.02. 1.05 respectively. The ultrasonic pulse velocity of decks in-service was decreased as the passage of time and the linear relationship in the ultrasonic pulse velocity to passage of time was found. From the results, The ultrasonic NDT will be helpful as an efficient method of on-site management of decks in-service.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.4
• /
• pp.253-261
• /
• 2024

Purpose. This study aimed to evaluate the effect of shell thickness on the fracture strength of provisional crowns fabricated by indirect-direct technique. Materials and methods. The study simulated the application of a provisional crown on a maxillary first molar implant abutment. A titanium metal die was milled by replicating a ready-made implant abutment. Using CAD software, shells for provisional crown was designed with varying thicknesses of 0.5 mm, 1.0 mm and 1.5 mm with different internal spaces for relining. These shells were 3D printed using photosensitive liquid resin and relined with PMMA resin to fabricate provisional crown specimens using indirect-direct technique. Ten specimens per each group were prepared. Fracture strength was measured by applying compressive loads vertically to the occlusal center of the specimens at a crosshead speed of 1.0 mm/min using a universal testing machine, and the maximum load value (N) at fracture was recorded. To compare the fracture strength between experimental groups, a one-way ANOVA followed by Tukey's post hoc test was conducted (α=.05). Results. The fracture strength was observed in the following order: Group 1.5 (1504.5 ± 141.30 N), Group 1.0 (1420.2 ± 182.05 N), and Group 0.5 (1083.1 ± 178.90 N). Group 1.5 was not significantly different from group 1.0, but was significantly different from group 0.5, and group 1.0 was also significantly different from group 0.5. Conclusion. The fracture strength of provisional crowns fabricated by the indirect-direct techniques were significantly different depending on the thickness of the shell. The fracture strength of the indirect-direct method was significantly lower when the shell thickness was 0.5 mm compared to 1.0 mm and 1.5 mm. This finding indicates that the shell should not be too thin when fabricating provisional crowns using the indirect-direct technique.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.393-401
• /
• 2009

Objective: The purpose of this study was to compare the shear bond strength (SBS) of brackets and microleakage of a tooth-adhesive-bracket complex bonded with a direct and an indirect bonding technique after thermocycling. Methods: Fifty non-carious human premolars were divided into two equal groups. In the direct bonding group a light-cured adhesive and a primer (Transbond XT) was used. In the indirect-bonding group, a light-cured adhesive (Transbond XT) and chemical-cured primer (Sondhi Rapid Set) were used. After polymerization, the teeth were kept in distilled water for 24 hours and thereafter subjected to thermal cycling (500 cycles). For the microleakage evaluation, 10 teeth from each group were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, and examined under a stereomicroscope. Fifteen teeth from each group were used for SBS testing with the universal testing machine and adhesive remnant index (ARI) evaluation. Data were analyzed using the Mann-Whitney U test, Chi-square test, and Fisher's exact test. Results: There were no statistical differences on SBS and microleakage between the two bonding techniques. The indirect bonding group had a significantly lower ARI score. Bracket failures were obtained between enamel-resin interfaces. Conclusions: The type of bonding technique did not significantly affect the amount of microleakage and SBS.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.183-184
• /
• 2002

악취현상 평가방법은 냄새유발물질의 농도를 정량적으로 분석하는 화학성분분석법과 복합취기물질에 의란 감각수준을 다수의 악취판정인이 평가하는 관능측정법으로 대별할 수 있다. 특히, 관능측정법의 경우 자극의 세기를 표현하는 직접관능법과 최소냄새감지한계회석배수를 구하는 간접관능법으로 구분할 수 있으며, 환경악취현상을 객관적으로 평가하기 위해서는 성분분석과 감각수준을 평가하는 두 방법에 의한 측정결과를 종합적으로 고려하는 것이 타당한 것으로 알려져 있다. (중략)

• Geotechnical Engineering
• /
• v.20 no.5
• /
• pp.58-65
• /
• 2004

일반적으로 토압, 사면안정, 기초의 지지력 계산 등에 이용하는 강도정수를 결정하기 위한 시험법으로는 일축$.$삼축시험과 직접전단시험이 많이 이용되고 있다. 일축$.$삼축시험은 흙 공시체를 축방향으로 압축 또는 신장 파괴시켜서 압축강도를 구하는 것으로, 활동면의 응력을 Mohr-Coulomb의 파괴 기준으로부터 간접적으로 구하기 때문에 간접전단시험으로 불리고 있다. 특히. 삼축시험은 공시체의 주응력 상태가 명확하기 때문에 연구$.$실용면에서 폭넓게 이용되고 있다. (중략)

• Bulletin of Food Technology
• /
• v.10 no.2
• /
• pp.101-117
• /
• 1997