• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.73-92
• /
• 2023

With the increase of risk of gas explosion, various methods for indirectly estimating the explosion paramaters, which are required for the prediction of gas explosion scale and impact. In this study, the characteristics of the most frequently used methods such as TNT equivalent method, TNO multi-energy method, and BST method and the processes for determining the parameters of the methods were compared. In the case of TNT equivalent method, an adequate selection of the efficiency factor for various conditions such as the type of vapor cloud explosion and explosion material is needed. There is no objective guidelines for the selection of class number in TNO multi-energy method and it is not possible to estimate negative overpressure. It was found that there were some mistakes in the reported parameter values and suggested corrected values. BST method provides more detailed guidelines for the estimation of the explosion parameters including negative overpressure, but the graphs used in this methods are not clear. In order to overcome the problem, the graphs were redrawn. A more convenient estimation of explosion parameters with the numerical expression of the redrawn graphs will be available in the future.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.41-47
• /
• 2016

Background: For the accurate dose assessment in radiation therapy, energy spectrum of the photon beam generated from the linac head is essential. The aim of this study is to develop the technique to accurately unfolding the energy spectrum with the transmission analysis method. Materials and Methods: Clinical linear accelerator and Monet Carlo method was employed to evaluate the transmission signals according to the thickness of the observer material, and then the response function of the ion chamber response was determined with the mono energy beam. Finally the energy spectrum was unfolded with HEPROW program. Elekta Synergy Flatform and Geant4 tool kits was used in this study. Results and Discussion: In the comparison between calculated and measured transmission signals using aluminum alloy as an attenuator, root mean squared error was 0.43%. In the comparison between unfolded spectrum using HEPROW program and calculated spectrum using Geant4, the difference of peak and mean energy were 0.066 and 0.03 MeV, respectively. However, for the accurate prediction of the energy spectrum, additional experiment with various type of material and improvement of the unfolding program is required. Conclusion: In this research, it is demonstrated that unfolding spectra technique could be used in megavoltage photon beam with aluminum alloy and HEPROW program.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.35-47
• /
• 1979

수자원과 에너지는 식량 생산에 직접 간접으로 큰 영향을 미치고 있으며 또한 1973년 에너지 위기 이후 농업에 사용된 에너지가 효율적으로 사용되었는가에 대한 연구는 농공학자들의 큰 관심이 되어왔다. 본 연구는 필리핀의 수작농업에 있어서 경운정지시 관개에 따른 토양경도의 변화와 , 토양경도와 연료소모율과의 관계를 구명하고, 에너지와 관개수의 효율적인 이용을 연구하고저 건기와 우기에 각각 수행되었으며 그의 결과를 요약하면 다음과 같다. 가. 건기 1) 관개시작후 1-2일간 토양의 수분함량이 증가함에 다라 토양의 경도는 급격히 감소하였으며, 관개 3일째는 온난한 감소를 ,그리고 4일째부터는 거의 변화가 없었다. 2) 토양의 경도에 따라 경운작업시 연료감소율, 기계의 작업성능에 큰 차가 있었으며 , 관개 3일후 토양의 수분함량과 토양의 경도가 안정됨에 따라 각 처리간의 연료의 소모율과 기계의 작업성능도 비슷하였다. 3) IRRI 5 Hp 경운기는 관개수로 인해 경도가 낮아진 토양에서도 이동성 문제가 없을 만큼 충분히 경량이었다. 4) 관개수의 양의 따라 처리별로 경운전 토양의 전단력에 큰 차가 있었으나 , 경운정지작업후의 토양전단력은 전처리에 있어서 거의 비슷하였다. 이는 경운정지작업시 처리간의 연료소모율, 기계의 작업성능의 차로 설명될 수 있다. 5) 경운정지시의 토양상태는 식물의 생육, 잡초의 발생율에 거의 영향을 미치지 않았다. 6) 본 실험은 한가지 토양형식에 대해 수행되었으며 앞으로 여러 토양형식에 대해 이와 같은실험을 수행하여 토양형식에 따른 수분함량, 토양경도, 에너지 소모율들의 관계를 구명하여 관개수의 효율적인 이용이 가능하리라 사료된다. 나. 우기 1) 경운작업전에 이미 토양이 수분으로 포함되어 있는 상태이었으므로, 추가의 관개수가 토양의 경도, 기계의 작업성능, 연료소모율에 영향을 미치지 않았다. 2) 경운정지기간이 가장 짧았던 처리구(3일) 에 있어서 경운정지후 토양전단력이 다른 3 처리에 비해 크게 나타났다. 식물의 생육 또한 타처리에 비해 저조했으며 잡초발생율도 높았다. 3) 경운정지기간이 가장 짧았던 처리구(3일)을 제외한 3처리 간에는 연료소모율, 식물생육, 잡초발생율등이 거의 비슷하였으며, 우기에는 위의 3 처리 중 11 간의 경운정지기간이 가장 효율적인 것으로 나타났다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.4
• /
• pp.88-100
• /
• 2013

This study evaluated the direct and indirect environmental impacts of various unit operations of a industrial waste incineration plant by using the life cycle assessment tool and reviewed the improvement plan. During the incineration process, the direct environmental impact was decreased with decrease in emission of various air pollutants by incorporating an air pollution prevention facilities. However, an increase in indirect environmental impacts was observed as a consequence of resources and energy of consumption at the various operational facilities. Consequently, quantitative direct and indirect impact were 89.1%, 10.9%, respectively. The environmental impact analysis of system revealed the highest impact of incineration followed by the impacts of other unit processes such as semidry reactor, and bag-filter. The various air pollutants and ashes generated during the incineration process caused the most significant environmental impact. Among the various categories of environmental impact, global warming accounted the highest impact(more than 85%) followed by eutrophication, and abiotic depletion. As a result of the avoided impact by the utilization of heat generated during the waste incineration process, using an incineration heat for steam and electricity obtained the impact reduction of 45.5%, 19.8%. So, during siting of new incineration plant, the utilization of steam generated from the waste combustion is highly considered to reduce the environmental impact.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.170-174
• /
• 2007

Although research efforts for brain waves have prospered in medicine and engineering, acupuncture still has a long way to go regarding researches on brain waves analysis. Thus this study set out to analyze brain waves stimulated by indirect mugwort moxibustion, which was part of acupuncture techniques, and to investigate their correlations with the automatic nervous system. For the experiments, stimulation was given to Jungwan, Shingwol and Gwanwon, which were some of the spots on the body suitable for acupuncture, through indirect mugwort moxibustion. The subjects' brain waves were measured before the stimulation, during the stimulation, and one hour and two hours after the stimulation. The measurements were analyzed with Matlab 7.0 for FFT and frequency power spectrum. Then the ${\alpha}$, ${\beta}$, ${\delta}$, and ${\theta}$ waves were analyzed and examined for changes to the percentage of each frequency and to the amplitude of vibration according to the stages of stimulation. The EEG data of the entire brain were translated into FFT to analyze the percentage of the ${\alpha}$, ${\beta}$, ${\delta}$, and ${\theta}$ waves. As a result, the ${\alpha}$ waves recorded a double increase after the stimulation. The power spectrum analysis results of the entire brain decreased the ${\alpha}$ and ${\beta}$ waves dropping in the energy level, which suggested that the parasympathetic nerves were activated. When the results of the study were compared with those of the previous study, it's confirmed that indirect moxibustion stimulation could cause changes to the automatic nervous system and bring stability to those who were nervous or under stress due to the proportionate increase of the ${\alpha}$ waves.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.301-306
• /
• 2011

The paper presents an analysis of the heating cycle and discusses a desalination cycle that uses lowtemperature seawater. The basic heating cycle model is the heat pump cycle, and seawater desalination is usually performed by the indirect freezing desalination method. The low temperature of the seawater (below $5^{\circ}C$) acts as the heat source of the evaporator. R-134a, R-1234yf, R-600a are used as working fluids. In the 2-stage compression cycle, the compressor's work decreased by about 15.6% from that in the 1-stage compression cycle. Further, the COP in the 2-stage cycle was 17.6% higher than that in the 1-stage cycle. In the indirect desalination cycle, the energy per unit fresh water productivity in the 2-stage cycle was 19.8% lower than that in the 1-stage cycle.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.288-293
• /
• 2007

미국 911 테러 발생 이후로, 국가 기반시설(예: 송/배전 전력망, 석유/가스 파이프라인, 원자력 발전소, 정보통신 시설, 교통 시설, 금융 시설, 매스미디어 시설 등)에 대한 테러리스트의 사보타지 리스크를 관리하는 도전문제에 정부 차원이나, 기업 차원에서 국내외적으로 뜨거운 이목이 집중되고 있다. 그 가운데 에너지 시스템, 특히 원자력 발전소의 물리적 보안은 국가 안보 차원에서 매우 중대한 이슈가 되고 있다. 이는 사보타지로 인한 이러한 시스템의 파손이 국민, 작업자, 또는 외부 환경에 방사성물질 누출과 같은 중대한 결말을 초래할 수 있기 때문이다. 원전과 같은 복잡 시스템에서 설계 기준 위협이 초래할 수 있는 이러한 결말은 그 시스템의 특정 핵심 표적(예: 부품, 구역, 자산, 행위, 인원)의 방호를 통해 효과적으로 방어될 수 있다. 다시 말하면, 표적 인식에서는 어떻게 방어할 것인가에 앞서서 무엇을 방어할 것인가를 다루려는 것이다. 이 연구의 주요 목적은 여태까지 개발된 다양한 표적 인식 기법의 개발 추세를 소개하고 향후 전망을 제시하는 데에 있다. 이를 통해 표적 인식 기법의 수월성, 신뢰성, 및 경제성을 제고할 수 있으리라 본다. 표적 인식 기술의 활용성 측면에서 볼 때, 표적 인식은 하드웨어 적이거나 소프트웨어적인 방호 시스템의 설계에 필수적이므로, 신뢰성 높은 표적 인식은 다음과 같은 긍정적인 파급 효과를 줄일 수 있다: 1) 사보타지 리스크 감소에 직간접적으로 기여할 수 있다; 2) 제한적인 보안 재원을 효율적으로 할당할 수 있다; 3) 보안 대응군대의 훈련 시나리오를 개발할 수 있다; 4) 발전소 규제요건인 안전조치 계획을 비용이나 보안 측면에서 향상시켜 국민 안심(public easiness)을 도모할 수 있다. 향후에는 보다 더 광의적인 복잡 시스템 사이에서 상호 연계적인 사보타지에 대한 표적 인식의 기법들이 점검될 필요성이 있다고 본다.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.2
• /
• pp.149-162
• /
• 1996

The results of space radiation experiments carried out on board the first two Korean technology demonstration microsatellites are presented in this paper. The first satellite, KITSAT-1, launched in August 1992, carries a radiation monitoring payload called cosmic ray experiment(CRE) for characterizing the low-earth orbit(LEO) radiation environment. The CRE consists of two sub-systems: the cosmic particle experiment (CPE) and the total dose experiment(TDE). In addition, single event upset(SEU)rates of the program memory and the RAM disk are also monitored. The second satellite, KITSAT-2, launched in September 1993, carries a newly developed 32-bit on-board computer(OBC), KASCOM(KAIST satellite computer in addition to OBC186. SEUs ocurred in the KASCOM, as well as in the program memory and RAM disk memory, have been monitored since the beginning of the satellite operation. These two satellites, which are very similar in structures but different in orbits, provide a unique opportunity to study the effects of the radiation environment characterized by the orbit.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.20-26
• /
• 2018

As the global warming due to greenhouse effect has become serious problem, it is necessary to introduce the technology, for instance, such as diversity or saving of energy to reduce the use of fossil fuel. The purpose of this study was to investigate the characteristics on materials of absorption plate, unpowered and minimum use of power in cooling and heating combined device. As the results, it was observed that, in case of summer, since temperature of absorption device of solar heat(ADSH) was lower than that of no ADSH, cooling effect was insignificant in case of being not installed cold-reservoir. However, in case of winter, heating effect was certified even though the power was not used. At secondhand, the performance of ADSH with Cu was higher 2 times than that of ADSH with Al.

• Geotechnical Engineering
• /
• v.8 no.1
• /
• pp.59-66
• /
• 1992

The SPT If value has been known to be influenced by various factors, among which the actually delivered energy level of the falling ram has the most significant effect. If N values of different energy levels are to be applied in the general analysis which is based on N values of standard energy levee the safety of the foundation might be in danger or the design might be overestimated. In this study the actual falling velocity of the ram has been measured so that the energy level could be estimated. The results Indicated that the energy level should be considered in the analysis or the design in this country, since the measured values are different from the internationally accepted scandard value, N60