• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.148-149
• /
• 2003

렌즈와 거울의 형상을 정밀하게 측정하고 평가하는 광학시험에 많은 형태의 광간섭계가 개발되고 사용되어왔다. 그 중, 회절격자를 광선분할기로 사용하는 광간섭계들을 통칭하여 회절격자 간섭계라 부른다. 회절격자 간섭계는 별개의 광학표면을 사용하지 않고 회절격자에서 회절된 파면을 직접 기준파면으로 사용할 수 있으므로, 격자의 형태, 주기를 선정하여 기준파면과 측정파면을 원하는 방향으로 재생하여 다양한 형태의 간섭계를 만들 수 있다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.156-160
• /
• 2002

In this paper, we have estimated by means of the theoretical analysis and the simulation of FCA(Fixed Channel Assignment) and CB(Channel Borrowing) in order to consider the CB as a technique to meet ducting interference from adjacent countries. Also, we assumed that the receiving power level of ducting interference with time rate can be characterized by the normal distribution due to the previous measured results, and the ducting interferences which are exceeding the reference power level can be regarded as calls. These calls can be processed by CR assignment and by which sharing channels between cells brings to us the method of meeting the ducting interference to use spectrum resources effectively. However, the spectrum frequency reusing and the interference effects between channels should be considered in CB simulation in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.805-814
• /
• 2013

According to the shut-down of Analog TV service on 30th. December, 2012, UHF Digital Dividend Band (698~806MHz) could be used for Mobile service such as LTE(Long Term Evolution). In the condition that this band is allocated for LTE service, Interference evaluation between LTE and adjacent DTV service was carried out, using LTE-A system-level simulator which was developed for simulation of IMT-Advanced technology. If LTE service be commercialized in this band, this study proposes the coexistence condition through the interference evaluation such as the effects not only to DTV receiver from LTE terminal but also to LTE base station from DTV transmitter. It is expected that the coexistence condition by these studies will be applied to network algorism for IMT-Advanced system in this band.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.32-40
• /
• 2003

An experimental research has been carried out for flow visualizations of the shock wave/turbulent boundary-layer interaction control utilizing the aeroelastic flaps, Spark shadowgraphs, kerosene-lampblack tracings for the surface streakline pattern, and interference fringe patterns over a thin oil-film applied at the downstream of the shock interactions have been obtained , Effects of variation of the shapes and thicknesses of the flaps are tested, and all the results are compared to the solid-wall reference case without flow-control mechanism , From the qualitative observation of the variation of skin friction utilizing the interference fringe patterns over the silicone oil-film, a strong spanwise variation of the skin friction with a narrow and long region of separation has been noticed near the centerline behind the shock structure, which phenomenon demonstrate a strong three-dimensionality of the shock interaction flows, Influence of the shape of the cavity under the flaps to the shock interaction is also tested, and it is observed that the shape of the cavity is not negligible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.400-401
• /
• 2006

광-바이오센서로 이용하기 위해 광섬유 형태의 마흐-젠더 간섭계와 측면 연마된 광섬유를 결합한 구조를 제안하였고, 이를 제작 및 특성 평가하였다. 마흐-젠더 간섭계 구성은 1310nm와 1550nm 파장에서 광 파워 분기비가 50:50인 $2{\times}2$ 광커플러 2개를 제작하여 구성하였으며, 센서부로는 측면 연마한 광섬유를 이용하였다. 제작된 광섬유 형태의 마흐-젠더 간섭계 센서의 센서부 표면에 다양한 굴절률 용액을 이용하여 광학적 특성을 평가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.388-389
• /
• 2006

굴절률 등을 측정하기 위한 광센서로 이용하기 위해 광섬유 형태의 마이켈슨 간섭계와 측면 연마된 광섬유를 결합한 구조를 제안하였고, 이를 제작 및 특성 평가하였다. 마이켈슨 간섭계 구성은 광 파워 분기비가 50:50인 광커플러와 센서부로 사용하기 위한 측면 연마한 광섬유를 이용하였다. 그리고 광섬유의 끝단에는 거울 역할을 하도록 은(Silver)을 증착하여 구성하였다. 광섬유 형태의 마이켈슨 간섭계 센서의 센서부 표면에 굴절률 용액을 이용하여 광학적 특성을 평가하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.34-38
• /
• 2000

In this paper, interference effects between NGSO and HAPS in the feeder link have been simulated and analyzed by means of calculating excess time percent and duration below the C/I protection ratio. As the results, in the case of HAPS interference into NGSO, it can be obtained that the lowest C/I values are 27.42dB in 50km and 12.73dB in 20Km of HAPS altitudes, respectively. And in the case of NGSO interference into HAPS, it can be obtained that the lowest C/I values are 13.94dB and 10.42dB respectively. HAPS system has more interference reception from other systems or effects more interference into other systems as its altitude is lower. Also, the lowest C/I values are appeared at difference time with its altitude.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.252-256
• /
• 1998

본 논문은 새로운 서비스의 하나인 WLL 시스템의 도입에 따른 기존 고정서비스인 M/W 시스템에 미치는 간섭영향을 분석한 것이다. 이를 위해 M/W국에 미치는 WLL 시스템의 순방향 및 역방향 링크상에서의 간섭전력을 계산하여 그 평가를 행하였다. 그 결과로서 순방향링크에 의한 간섭영향은 기지국의 송신출력에 비례하여 증가하지만 셀반경에는 관계가 없다. 반면, 역방향링크에 의한 간섭영향은 가입자의 송신출력에 비례하고, 셀반경이 작아짐에 따라 간섭영향이 커진다. 비록 본 연구는 M/W 시스템에 미치는 WLL 시스템의 간섭영향 분석에 국한되고 있지만, 향후 이와 반대인 WLL 시스템에 미치는 M/W국의 간섭영향을 분석하기 위한 연구로 확장 가능하다.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.13-24
• /
• 2013

IEEE 802.15.4 network and WiFi network are installed to overlap each other and configured to use adjacent frequency bands in which case the communication service required by applications can not be guaranteed because of randomly increased frame transmission delay and frequent frame transmission failures at nodes in IEEE 802.15.4 network. In this paper, transmission delay model at IEEE 802.15.4 nodes and an experimental system to evaluate the interference from WiFi traffic are described, then elements for the evaluation of interference are measured with the analysis of their characteristics. A sequential method of using medium access layer and physical layer elements of IEEE 802.15.4 protocols is proposed to decide interference from WiFi network. With the proposed method, if an evaluation function having frame transmission failures and transmission delay as variables returns a value greater than a threshold, intensive measurements of wireless channel power are carried out subsequently and the final decision of interference is made by the calculated average channel power. Experimental results of the method show that the decision time is reduced with increased frequency of decision in comparison to an other similar method.

• Information and Communications Magazine
• /
• v.20 no.2
• /
• pp.31-41
• /
• 2003

UWB 무선기술은 초광대역 특성에 의한 높은 전송속도와 기존의 무선장치들과 상호 간섭영향 없이 주파수를 공유하여 사용할 수 있다는 장점 때문에 새로운 방식의 근거리 무선통신 기술로 급부상되고 있다. 특히 IEEE802.15.3에서 UWB 무선기술을 WPAN으로 사용하기 위한 표준화 작업이 진행되고 있어 현재 가장 널리 사용되고 있는 IEEE802.11 및 Bluetooth 장치와 향후 실내 환경에서 공존할 가능성이 매우 높아지고 있으며 이에 따른 장치 상호간 간섭영향 평가가 요구되고 있다. 본 논문에서는 2.4 GHz 대역 IEEE 802.11b 무선랜 장치를 사용하는 실내 환경에서 UWB 무선장치가 공존할 경우 무선랜 장치의 Packet Failure Rate 및 Throughput 측정을 통해 UWB 신호가 무선랜 장치에 미치는 간섭영향을 분석하였다.